• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.103-107
• /
• 2020

The purpose of this study is to resource calcium ions contained in most industrial by-products, and confirm the characteristics of calcium ions by extraction and separation conditions. Calcium oxide was used as a calcium extraction source, and hydrochloric acid as an extraction solvent, and the extraction amount according to the concentration of the extraction solvent and the pH dependent characteristics of the extract were analyzed. As the extractant concentration increased, the extracted amount increased while the pH for the extraction was kept constant. In order to separate extracted calcium ions, an acid-basic solution was injected and the formation of precipitates and also the form of precipitates were analyzed. When the sulfuric acid and sodium hydroxide solution of acid and basic substances were injected into the calcium extract, precipitates were formed and separated into CaSO₄ and Ca(OH)₂ forms.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.677-682
• /
• 1991

Extraction of soybean oil from full tat soybean flour was performed using a supercritical carbon dioxide extraction system. Extraction pressure and temperature of the process were 3,000-7,000 psig and $40-70^{\circ}C$, repectively. For the extraction of lg of soybean oil, 25l of carbon was consumed at 7,000 psig and $60^{\circ}C$, whereas more than 2501 of carbon dioxide was consumed at 3,000 psig and $60^{\circ}C$. The solubility of soybean oil in supercritical carbon dioxide decreased with the increase in temperature below 6,000 psig, and the reverse trend was observed above 6,000 psig. At 6,000 psig the solubilities were shown to be, constant regardless of extraction temperature. Soybean oils , extracted with supercritical carbon dioxide were lighter in color and contained less phosphorus than those extracted with hexane.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.46-53
• /
• 1993

The kinetic and equilibrium characteristics of copper extraction by salicylaldoxime in chloroform and benzene were investigated. Equilibrium constants such as dissociation constant, distribution coefficient of salicylaldoxime and stability constant, distribution coefficient and molar extinction coefficient of oxime-Cu chelate were determined from absorbance. Extracted species of Cu-chelate were found to be ${\bar{CuR_2}}$. Overall initial extraction rate of copper by salicylaldoxime in chloroform was expressed by the following equation : $R=k[Cu^{2+}]{\bar{[HR]}}^{0.5}/[H^+]^{0.4}$.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.741-744
• /
• 2002

Single phase of multicomponent oxide ZrTiO4 film could be prepared through surface sol-gel route simply by coating the mixture of 100 mM zirconium butoxide and titanium butoxide on $Pt/Ti/SiO_2Si(100)$ substrate, following pyro lysis at $450^{\circ}C$, and annealing it at 770 $^{\circ}C.$ The dielectric constant of the film was reduced as the film thickness decreased due to of the interfacial effects caused by layer/electrode and a few voids inside the multilayer. However, the dielectric property was independent of applied dc bias sweeps voltage (-2 to +2 V).The dielectric constant of bulk film, 31.9, estimated using series-connected capacitor model was independent of film thickness and frequency in the measurement range, but theoretical interfacial thickness, ti, was dependent on the frequency. It reached a saturated ti value, $6.9{\AA}$, at high frequency by extraction of some capacitance component formed at low frequency range. The dielectric constant of bulk ZrTiO4 pellet-shaped material was 33.7 and very stable with frequency promising as good applicable devices.

• Analytical Science and Technology
• /
• v.10 no.5
• /
• pp.370-377
• /
• 1997

The several fundamental parameters on the solvent extraction of Co(II), Cu(II) and Zn(II) with dithizone were investigated. The value of $K_{a1}/K_p$ of dithizone(at $25^{\circ}C$) between an aqueous phase and a chloroform was found to be $4.72{\times}10^{-11}$. And the mole ratios of metal ion to dithizone in its metal complexes were determined by mole ratio method. The extractibilities(%) for metal-dithizone chelates were obtained from the extraction equilibria of metal-dithizone complexes between an aqueous phase and a chloroform as follows. Co(II) : 92.3% at pH 8.0 : Cu(II) : 97.1% at pH 4.0 and Zn(II) : 99.0% at pH 7.0. And also, in optimum experimental conditions the extraction constants of Co(II), Cu(II) and Zn(II) were examined.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2013

Subcritical water which acts as organic solvent with increasing temperature and pressure because dielectric constant and viscosity decrease can be used to remediate PAHs-contaminated soil. Factors influencing on extraction were studied with varying the water temperature $200{\sim}275^{\circ}C$, extraction time 0~90 min, flow rate 10~100 mL/min and pressure 3.9~10MPa. 300 g of soil sample which was contaminated with PAHs(naphthalene, phenanthrene, fluoranthene and pyrene; 423, 420, 539 and 428 mg/kg of initial concentration) was packed into the cell and placed to reactor and then the subcritical water was pumped through the cell for PAHs extraction. Naphthalene was removed almost 100% at relatively low temperature ($200^{\circ}C$). The removal rate of phenanthrene, fluoranthene, and pyrene increased by 8, 26, and 23% when the temperature increased from 200 to $275^{\circ}C$; and it was gradually increased as extraction time increased from 0 to 90 min. Decreasing removal rate when water flow rate increased from 10 to 30 mL/min, but there was no significant change after 30 mL/min. This is supposed due to channeling phenomenon. The pressure was not an effective factor for extraction of PAHs in this study. Based on the results, the importance of effective factor was in following sequence: temperature >> time > flow rate.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.557-560
• /
• 2007

The durability of 80 kW class stack module was tested in hydrogen recirculation and non-recirculation systems with the condition of 300Amps (constant current mode) and hydrogen pulse purging (10 seconds close/0.8 seconds open). A localized membrane failure in the interfacial area between membrane and sub-gasket, carbon corrosion in cathode electrode, and Pt dissolution/extraction have been found through the post mortem analysis such as CV, Impedance, SEM, and so on. The main reason of these mechanisms will be discussed in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.61-64
• /
• 1992

In this paper, a visual pattern recognition system is proposed, which can recognize both a pattern and its location. This system, referred to as the expanded neocognitron, has the following capabilities: (1) A higher performance in extraction of features, and (2) A new capability for recognizing the locations of patterns. This system adopts the learning and recognizing mechanism of the neocognitron. First, the ability to classify pattern is enhanced by improving the mechanisms of feature extraction and learning algorithm. Second, the function of detecting the location of each pattern is realized by developing an architecture which does not reduce structure, i.e., the unit density is constant all the way from the input stage to the output stage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1286-1291
• /
• 2000

A new electro-rheological squeeze film damper (ER SFD) has been sealed with slotted piston rings which have electrodes at the inside of the constant gap. The slotted ER SFD can prevent the problem of electric discharge which might be occurred in the previous configuration of an ER SFD. The current paper presents the extraction of linearized dynamic coefficients within small orbit where these coefficients are controlled by the application of electric strength. Test rig has been modified to isolate the damper section for dynamic coefficient extraction. The results show that rotordynamic coefficients, damping and inertia terms, increase with increasing supply voltages, while stiffness coefficients decrease with increasing supply voltages. Rotating speed of rigid Shaft does not affect these coefficients.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1029-1034
• /
• 2000

A new electro-rheological squeeze film damper (ER-SFD) has been sealed with slotted piston rings which have electrodes at the inside of the constant gap. The slotted ER-SFD can prevent the problem of electric discharge which might be occurred in the previous configuration of an ER-SFD. The current paper presents the extraction of linearized dynamic coefficients within small orbit where these coefficients are controlled by the application of electric strength. Test rig has been modified to isolate the damper section for dynamic coefficient extraction. The results show that rotordynamic coefficients, damping and inertia terms, increase with increasing supply voltages, while stiffness coefficients decrease with increasing supply voltages. notating speed of rigid shaft does not affect these coefficients.