• Title/Summary/Keyword: extraction

Search Result 17,072, Processing Time 0.054 seconds

$Cl_2/BCl_3$/Ar 유도 결합 플라즈마에서 온도에 따른 $ZrO_2$ 박막의 식각 (Temperature Dependence on Dry Etching of $ZrO_2$ Thin Films in $Cl_2/BCl_3$/Ar Inductively Coupled Plasma)

  • 양설;김동표;이철인;엄두승;김창일
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.145-145
    • /
    • 2008
  • High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

  • PDF

에어쿠션 및 주파수 영역 필터를 이용한 호흡 및 심박 신호 검출 (Detection of Heartbeat and Respiration Signal Using the Aircushion and the Frequency Domain Filter)

  • 김주한;조성필;신재연;이전;이경중
    • 전자공학회논문지SC
    • /
    • 제47권5호
    • /
    • pp.33-42
    • /
    • 2010
  • 본 연구에서는 주기적인 심장 박동과 호흡으로 인해 발생하는 인체의 미세한 변위를 기반으로 심폐활동을 모니터링 하는 방법을 제안하였다. 제안한 시스템은 에어쿠션과 센싱 하드웨어 및 신호처리 알고리즘으로 구성되어 있다. 에어쿠션은 피부의 표면에 센서의 부착없이 무구속적으로 심박과 호흡을 측정하는데 사용되며 에어쿠션 위에 피험자가 앉았을 때 쿠션내부에 작은 압력변화를 일으킨다. 에어쿠션 내부의 미세한 압력변화는 압력센서에 의해 전기적인 신호로 변환되고 아날로그 하드웨어에 의해 증폭되고 필터링 되어 출력된다. 압력센서에서 발생한 신호는 주파수 영역필터에 의해 심박과 호흡으로 분리되어 추출된다. 에어쿠션의 계측 성능을 평가하기 위해 기존의 계측방법인 심전도와 호흡신호를 동시에 측정 후 비교하였다. 에어쿠션을 이용한 호흡 및 심박 검출률의 평균 민감도는 각각 98.67%, 99.24% 이다. 이 결과를 통해 에어쿠션을 이용한 심폐 활동 측정 방법은 설치 과정이 간단하고 쉬우며 일상생활에서 무구속적으로 호흡 및 심박을 모니터링 하는데 사용할 수 있음을 알 수 있었다.

홀터 심전계를 위한 심방세동 신호 추출 알고리즘 (Atrial Fibrillation Waveform Extraction Algorithm for Holter Systems)

  • 이전;송미혜;이경중
    • 전자공학회논문지SC
    • /
    • 제49권3호
    • /
    • pp.38-46
    • /
    • 2012
  • 심방세동은 발작성 심방세동 단계에서부터 검출 및 분석하여 적절한 치료를 실시하여야 하며, 홀터 심전계를 통해서만 측정할 수 있다. 현재 12채널 심전계를 통해서는 심방세동 신호를 추출할 수 있는 효과적인 방법들이 개발되어 있으나, 홀터 심전계를 위한 방법으로는 심실활동 템플릿을 단순 제거하는 ABS(averaged beat subtraction)방법이 사용되고 있다. 최근 단일 채널 심전도로부터 심방세동 신호를 추출하기 위한 PCA(principal component analysis) 또는 SVD(singular value decomposition) 기반의 알고리즘이 제안되기도 하였으나, 구현이 복잡하고 전문가의 개입이 필요한 한계가 있다. 본 논문에서는 주 입력인 심방세동 심전도에서 심실활동을 이벤트로서 검출한 뒤 이를 기준 입력으로 하는 이벤트 동기 적응필터(ESAF, event-synchronous adaptive filter)를 제안하고, 심방세동 신호 추출 성능을 평가해 보았다. 그 결과 기존 ABS 방법에 비해 우수할 뿐만 아니라, 전문가의 개입 없이도 PCA 또는 SVD 기반의 알고리즘과도 대등한 성능을 보였다. 나아가 이형성 심실활동이 있는 경우에도 효과적으로 대응할 수 있는 확장 ESAF 방법을 제안하였으며, 단형성 심실활동이 있는 경우와 유사한 수준의 성능을 확인하였다. 제안된 알고리즘을 홀터 심전계에 적용하면 발작성 심방세동 심전도의 분석뿐만 아니라 항부정맥 약물의 치료효과를 실시간으로 보다 정확하게 평가할 수 있을 것으로 기대된다.

바실러스에 의한 중금속 제거 및 EPS 추출물질 비교에 관한 연구

  • 손한형;김판수;이상호
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2006년도 학술발표회 발표논문집
    • /
    • pp.423-427
    • /
    • 2006
  • 1) 바실러스는 불리한 환경조건에서 포자를 형성하며 포자는 균체가 죽어도 살아 남고, 외부 환경이 좋아지면 다시 발아하여 영양형 균체를 형성하게 된다. 본 연구에서 바실러스를 우점화와 포자의 활성화를 위해 열처리(80$^{\circ}C$, 10min)를 한다 울산분뇨처리장 슬러지 Cake를 배양하여 포자화 전 후 상태의 미생물의 EPS 추출결과 RCF법을 적용하였을 때 Carbohydrate물질이 다른 추출법에 비해 가장 많이 추출되었고, Steaming extraction법을 적용하였을 때 Protein이 가장 많이 추출되는 것으로 나타났으며, 포자화 전 보다 포자화 후의 EPS 양이 더 많이 추출될 것이라는 가설을 가지고 실험한 결과 포자화 전보다 포자화 후의 EPS 양이 더 많이 추출되었다. 울산분뇨처리장의 슬러지 Cake를 배양하여 포자화 전 후의 Cu의 제거정도를 비교한 결과 포자화 후의 EPS물질이 포자화 전의 EPS물질보다 Cu를 더 많이 제거하는 것으로 나타났으며 EPS 물질이 중금속 제거능력이 탁월하다고 할 수 있겠다. 2) 용인분뇨처리장과 천안하수처리장의 MLSS의 중금속 제거능력을 알아보기 위해 미생물량을 고려했을 경우와 미생물량을 고려하지 않은 경우로 나누어서 실험을 하였는데 울산분뇨처리장의 슬러지 Cake를 가지고 실험한 결과와 마찬가지로 Bacillus의 EPS물질이 중금속 제거에 탁월하다는 것을 알 수 있다. 3) Baillus를 사용하는 김천 식품폐수 처리장과 활성슬러지를 사용하는 천안하수처리장과의 EPS 함량을 비교한 결과 김천 식품폐수 처리장의 EPS 물질중 Protein과 Carbohydrate가 천안하수처리장의 활성슬러지보다 더 많은 것으로 나타났다.TEX>, DIN/DIP비 표층수 $23.91\pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물은 태아에 도달하는 방사선량을 감소시키기에 적합한 설계임이 입증되었다. 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필

  • PDF

ArcView/spatial Analyst GIS 확장 프로그램을 이용한 수리지형 특성인자 분석 (Analysis of Hydrological Surface Characteristics using ArcView/Spatial Analyst GIS Extension)

  • 이기원
    • 한국지구과학회지
    • /
    • 제22권6호
    • /
    • pp.491-499
    • /
    • 2001
  • GIS S/W의 지리정보 처리기법을 이용하여 얻을 수 있는 수리지형 특성인자는 사면안정성 분석이나 하천환경 분석 등과 같은 다양한 수문학적 응용 연구의 기본적인 정보로 사용된다. 또한 실무적으로 적용 가능한 GIS의 확장 프로그램들은 이러한 기본 정보 뿐 만 아니라, 이전에는 복잡한 정보처리과정을 통하여 얻을 수 있었던 특성 정보들을 체계화되고 자동화된 과정을 통하여 손쉽게 분석이 가능하도록 하고 있다. 본 연구에서는 GIS S/W 수리응용 연구에서 확장 프로그램의 실제적인 적용성을 살펴보기 위하여 ArcView GIS S/W와 이를 기반으로 한 수리정보 분석 프로그램 등을 이용하여 예미지역(1:50,000)의 유수 및 지형인자를 추출하였으며, 여러 가지 매개변수를 통하여 사면안정도에 대한 평가분석을 예시하였다. 본 연구 결과로 확장 프로그램들을 이용하여 얻은 정보들은 실제 정보와 높은 상관도를 보이는 것으로 나타나서, 현장에서의 직접적으로 활용이 가능한 것으로 나타났고, 본 연구 대상지역내의 전반적인 사면안정도는 사면안정지수와 S-A Plot의 적용 결과로 이론적으로는 비교적 안정적인 것으로 나타났다. 본 적용 방법은 실제측정치와 함께 수리지형 특성과 관계된 기타 지역에 적용이 가능하다.

  • PDF

유전 알고리즘에 기반한 퍼지 벌레 검색과 자율 적응 최소-최대 군집화를 이용한 영상 영역화 (Image segmentation using fuzzy worm searching and adaptive MIN-MAX clustering based on genetic algorithm)

  • 하성욱;강대성;김대진
    • 전자공학회논문지S
    • /
    • 제35S권12호
    • /
    • pp.109-120
    • /
    • 1998
  • 본 논문에서는 퍼지 벌레 검색과 최소-최대 군집화 알고리즘에 기반한 영상 영역화 기법을 제안한다. 전체 영상에서 에지 정보는 픽셀들의 공간 관계를 포함하게 되며, 이를 위해 목적 함수들의 인자를 조정하여 퍼지 벌레의 행동을 정의하며, 에지 정보를 검사하는 방법으로 퍼지 벌레값과 최소-최대 노드를 이용한다. 에지 추출을 사용하는 현재의 영역화 방법들은 수학적 모델에 기반한 매스크 정보를 필요로 하며, 매스크 연산으로 인하여 수행 시간도 많이 걸리게 된다. 반면에, 제안하는 알고리즘은 퍼지 벌레의 검색에 따라 단일 연산을 수행하게 된다. 제안하는 알고리즘에서 필요한 범위의 크기를 스스로 결정하고 빠르고 강력한 계산을 수행하기 위해 최적해를 찾는 유전 알고리즘을 도입하고자 한다. 추가적으로, 영상의 그레이-히스토그램에서 퍼지 검색과 군집화를 수행하기 위해 유전 알고리즘을 사용하는 유전 퍼지 벌레 검색과 유전 최소-최대 군집화가 제안된다. 시뮬레이션 결과는 제안된 알고리즘이 히스토그램을 사용하여 적응적으로 양자화되며, 계산 시간과 메모리를 적게 요구하는 단일 검색 방법을 수행한다는 것을 보여준다.

  • PDF

수술후 급성 동통에 대한 Tramadol/Acetaminophen과 Codeine/Acetaminophen/Ibuprofen의 효과 발현시점과 진통효과의 비교 (COMPARISON OF TRAMADOL/ACETAMINOPHEN AND CODEINE/ACETAMINOPHEN/IBUPROFEN IN ONSET OF ANALGESIA AND ANALGESIC EFFICACY FOR POSTOPERATIVE ACUTE PAIN)

  • 정영수;김동기;김문기;김형준;차인호;한무영;이의웅
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제30권2호
    • /
    • pp.143-149
    • /
    • 2004
  • Background: Some clinical trials have reported that a new analgesic combination of tramadol and acetaminophen provides good efficacy in various pain models. For the more clinical uses of this agent, comparisons about the onset of analgesia and analgesic efficacy in the acute state of pain with the other drugs known as strong analgesics were needed. Purpose: The goal of this study was to compare the times to onset of analgesia and the other analgesic efficacy of 75 mg tramadol/650 mg acetaminophen and 20 mg codeine/500 mg acetaminophen/400 mg ibuprofen in the treatment of acute pain after oral surgery. Patients and Methods: Using a randomized, single-dose, parallel-group, single-center, and active-controlled test design, this clinical study compared the times to onset of analgesia using a two-stopwatch technique and the other analgesic efficacy of the single-dose tramadol/acetaminophen and codeine/acetaminophen/ibuprofen. These were assessed in 128 healthy subjects with pain from oral surgical procedures involving extraction of one or more impacted third molars requiring bone removal. From the time of pain development, the times to onset of perceptible and meaningful pain relief, pain intensity, pain relief, an overall assessment, and adverse events of the study medications were recorded for 6 hours. Results: The demographic distribution and baseline pain data in the two groups were statistically similar. The median times to onset of perceptible pain relief were 21.0 and 24.4 minutes in the tramadol/acetaminophen and codeine/acetaminophen/ibuprofen groups respectively and those to onset of meaningful pain relief were 56.4 and 57.3 minutes, which were statistically similar. The other efficacy variables such as mean total pain relief (TOTPAR) and the sum of pain intensity differences (SPID) were also similar in the early period after pain development and drug dosing. The safety of tramadol/acetaminophen was well tolerated and very comparable to that of codeine/acetaminophen/ibuprofen. Conclusions: In this acute dental pain model, the onset of analgesia and analgesic efficacy of tramadol/acetaminophen was comparable to that of codeine/acetaminophen/ibuprofen. These results showed that tramadol/acetaminophen was recommendable for fast and effective treatment in the management of postoperative acute pain.

하치조신경 마취 후 전기치수검사기(Electric pulp tester)를 이용한 하순부 감각 변화 평가 (Evaluation of the change of lower lip sensation after inferior alveolar nerve block by using the electric pulp tester)

  • 구명숙;김진욱;전영훈;권대근;이상한
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제37권6호
    • /
    • pp.464-469
    • /
    • 2011
  • Introduction: As dental implant surgery is becoming increasingly popular, it has become one of the causes for the hypesthesia of the inferior alveolar nerve, along with other surgical procedures, such as a third molar extraction. In addition, it tends to cause legal problems between the operator and patient. Therefore, there must be a proper method that is reliable, objective and economical to assess the nerve impairment. For this reason, an attempt was made to use an Electric Pulp Tester to assess inferior alveolar nerve block anesthesia. Materials and Methods: Thirty patients were tested. Electric pulp testing of the lower jaw skin was performed at the three different times, before anesthesia, at the onset of sensory changes and after 15 minutes waiting from the onset, and on the 10 points of the chin, which produced 10 sections on the skin area. Results: Twenty seven patients (90%) could feel the electric stimulus on the chin at all 10 points before local anesthesia and the scores represent the statistical differences between the right and left points except R4 and L4. After anesthesia, the difference between the right and left points (L3-R3, L4-R4, L5-R5) increased significantly with time but two points (L2, R2) showed no significant difference. The scores on the left chin (L3, L4, L5) increased, whereas the other points (R1-R5, L1, L2) showed no significant differences. Conclusion: This study highlights the potential clinical use of an electric pulp tester for an assessment of inferior alveolar nerve impairment.

Clinical characteristics and recurrence-related factors of medication-related osteonecrosis of the jaw

  • Kang, Mong-Hun;Lee, Dong-Keon;Kim, Chang-Woo;Song, In-Seok;Jun, Sang-Ho
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제44권5호
    • /
    • pp.225-231
    • /
    • 2018
  • Objectives: The purpose of this study was to investigate the demographic and clinical characteristics of patients with medication-related osteonecrosis of the jaw (MRONJ) and to elucidate factors affecting recurrence in surgical treatment. Materials and Methods: A total of 51 patients who were diagnosed with MRONJ were analyzed according to demographic and clinical features and treatment results through a retrospective chart review from 2013 to 2017 in the Department of Oral and Maxillofacial Surgery, Korea University Anam Hospital, Seoul in Korea. Results: Alendronate composed the majority of medication doses (55.6%), followed by ibandronate (20.0%), risedronate (15.6%), and zoledronate (6.7%). Forty patients (88.9%) were given oral medication, and five patients (11.1%) were intravenously treated, and the mean duration of medication use was $61.1{\pm}42.9$ months. A total of 10 patients (22.2%) had a drug holiday before MRONJ-induced dental treatment lasting an average of $6.8{\pm}7.0$ months. MRONJ occurred 2.7 times more in the mandible, with 41 cases (73.2%) occurring in the mandible and 15 cases (26.8%) occurring in the maxilla, and the prevalence of affected posterior parts (premolar-molar) was six times greater than that of the anterior parts (incisor-canine) (48 cases vs 8 cases, 85.7% vs 14.3%). The most common dental cause of MRONJ was tooth extraction (69.6%). Regarding recurrence, there was no statistical difference in recurrence rate according to either site or stage. However, recurrence occurred in 4 out of 34 cases (11.8%) in the primary closure group and 9 out of 20 cases (45.0%) in the secondary healing group, and there was a statistical difference with respect to closure technique. Conclusion: The identified risk factors in patients taking bone resorption inhibitors can aid dental clinicians in ensuring prevention and proper treatment of MRONJ.

상악 구치부 임플랜트 보철수복시 치관/치근비에 따른 응력 분포에 대한 유한 요소 분석 (FINITE ELEMENT ANALYSIS ON MAXILLARY MOLAR IMPLANT UNDER DIFFERENT C/R RATIO)

  • 김진호;김형섭;최대균;권긍록
    • 대한치과보철학회지
    • /
    • 제44권5호
    • /
    • pp.561-573
    • /
    • 2006
  • Statement of the problem: In cases of low bone level in maxilla followed by extraction due to severe periodontitis or enlarged maxillary sinus, crown-root ratio of implant prosthesis will increase. The prognosis of these cases is not good as expected. Purpose : The purpose is to compare stress distribution due to crown-root ratio and effect of splinting between two implants in maxillary molar area under different loads Material and methods: Using ITI($4.1{\times}10$ mm) implant. two finite element models were made(model S: two parallel implants, model A: one of two is 20 degree inclined). Each model was designed in different crown-root ratio(0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it splinted or non-splinted clinical situations. After that, 300 N force was loaded to each model in four ways.(load 1 : middle of occlusal table, load 2 : middle of buccal cusp, load 3 : middle of lingual cusp, load 4 : horizontal load to middle of buccal cusp), and stress distribution was analyzed. Results: On all occasions, stress was concentrated on neck of implant near cortical bone. In the case of inclined implant, stress was increased compared with parallel implants. Under load 1, 2, 3, stress was not increased even when crown-root ratio increases, but under load 4, when crown-root ratio increases, stress also increased. And more stress was concentrated under load 1 than load 2, 3. When crown-root ratio was same, stress under load 1, 2, 3 decreased when splinting, but under load 4, stress did not really decrease. Conclusion: Under vertical load, stress distribution related to crown-root ratio did not change. But under horizontal load, stress increased as crown-root ratio increases. Under vertical load, splinting decreased stress but under horizontal load, effect of splinting was decreased as condition of implant changes for the worse such as increase of crown-root ratio, inclined implant.