• 영어어문교육
• /
• 제18권3호
• /
• pp.25-51
• /
• 2012

The study explores the way professors working in a private university in Korea perceive the recent English-medium instruction (EMI) frenzy in Korean higher education (HE) and the way they respond to its manifestation at their institution. Working within a qualitative research paradigm (Merriam, 2009), I gathered data primarily via one-time semi-structured interviews with ten participants who have offered or are offering EMI at the time of data collection and used a qualitative data analysis method. The findings illustrate that the professors view external factors residing outside individual universities, such as the college rankings and the university evaluation parameters, as the principal drive behind the current EMI boom in Korean tertiary education. Acknowledging the importance of strengthening the international competitive edge of Korean HE in the global era, the professors perceive the EMI policy positively expecting it to be beneficial for both students and institutions. They, however, problematize the blind acceptance of EMI policy and externally forced EMI expansion movement in Korean HE, which they believe will lower the standard of the academic experience of students. Experiencing first-hand the inadequate manifestation of the EMI policy at their university, the professors claim that a systematic long-term implementation plan and context-suitable approaches should be taken at both the national and institutional level for successful future EMI implementation and expansion efforts.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.233-239
• /
• 2013

This paper proposes an accurate approach for predicting transferred power from a noise source to integrated circuits based on the characteristics of the power transfer network. A power delivery trace on a package and a printed circuit board are designed to transmit power from an external source to integrated circuits. The power is demonstrated between an injection terminal on the edge of the printed circuit board and integrated circuits, and the power transfer function of the power distribution network is derived. A two-tier calibration is applied to the test, and scattering parameters of the network are measured for the calculation of the power transfer function. After testing to obtain the indispensable parameters, the real received and tolerable power of the integrated circuits can be easily achieved. Our proposed estimation method is an enhancement of the existing the International Electrotechnical Commission standard for precise prediction of the electromagnetic immunity of integrated circuits.

• 수산경영론집
• /
• 제34권1호
• /
• pp.185-211
• /
• 2003

Initially, the system of outside director of cooperative has the object of consulting an external specialist. Recently, it takes a serious view of monitoring about securing clean management on the operating crisis. Nevertheless, in the field of NFFC(National Federation of Fisheries Cooperatives), it is difficult that the system of outside director of cooperative attains that is initial object. And in the field of FC(Fisheries Cooperative), it isn't in force about the outside director of cooperative. Therefore, it is important to make a following system improvement. (1) The ratio of outside directors among the member of board of directors has to be increased. (2) Outside director's term of office has to be amended from lyears to 2years and the current method of selection should be reformed to be a strict one with high standard of requirement and substantial screening for membership. (3) Outside directors' wage system must be actualized by adopting incentive system' etc. A measure of appointing an executive in a similar business line or organizations to ours as an outside director must be considered. FC have to introduce the system of outside director. (4) A recognition of proper management of outside directors and putting in practice is essential.

• 한국항해항만학회지
• /
• 제37권4호
• /
• pp.359-366
• /
• 2013

The objective of the research was to study the determinants affecting the decision to study nautical science program within a Thai maritime institute in preparation for working post-graduation as a ship officer on a merchant ship. The samples are classified by institute, academic year, cumulative score level, domicile, and parent's monthly income. The total sample of study was 386 Thai merchant marine students. The data collection method was a one to five rating scale questionnaire. The statistical methods applied in analyzing the data were percentage, mean, standard deviation, t-test, one way analysis of variance and a Sheffe's test. The study shows seven factors that influenced the decision in descending order; expectations, tuition and scholarships, selection system, quality of the institute, background and private capability, generality of the institute and external influences on the decision. The decision to select an institute was classified by institute and revealed that different institutes had distinct determinants that led to the decision. The students were from The Merchant Marine Training Center and from The International Maritime College, Kasetsart University were differences. There were no dissimilarity between academic year, cumulative score level, domicile, and parent's monthly income.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1346-1354
• /
• 2018

Quality of the power system depends upon the reliability of its components such as transformer, transmission lines, insulators, circuit breakers and isolators. The transient voltage due to internal or external reasons may affect the insulation level of the components. The insulation level of these components must be tested against these conditions. Different studies, testing of different electrical components against high voltage impulses and different industrial applications rely on the international manufactures for pulsed power generation and testing, that is quite expensive and large in size. In this paper a model of impulse voltage generator with capacitive load of pin type insulator is studied by simulation method and by an experimental setup. A ten stage high voltage impulse generator (HVIG) is designed and implemented for different applications. In this proposed model, the cost has been reduced by using small and cheap capacitors as an alternative for large and expensive ones while achieving the same effectiveness. Effect of the distributed capacitance in each stage is analyzed to prove the effectiveness of the model. Different values of front and tail resistances have been used to get IEC standard waveforms. Results reveal the effectiveness at reduced cost of the proposed model.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.153-165
• /
• 1992

Dental composite resin is a kind of the particle - reinforced composite material, and is widely used in recent dental restoration of anterior and posterior tooth region. The purpose of this study was to investigate the fracture behaviour according to volume fractions and external findings of the filler particles for better interpretation of the fracture characteristics of posterior dental composite resins by analytic method of fracture mechanics. The plane strain fracture toughness($K_{IC}$) and Acoustic Emission were determined with three - point bending test using the single edge notch specimen according to the ASTM - E399, and its analyzed data was compared with filler volume fractions derived from the standard ashing test and scanning electron fractographs of each specimen including the unfilled experimental resin as a control. The results were that the value of fracture toughness of the composite resin material was in the range from 0.85 MPa$\sqrt{m}$ to 1.60 MPa$\sqrt{m}$ and was higher than the value of the unfilled experimental resin, and the fracture behaviours dervied from Acoustic Emission analysis show prominent differences according to the volume fraction and the size of filler particles used in each composite resin. The degree of resistance against crack propagation seems to be increase and the fractographs demonstrate the high degree of surface roughness and irregularity according with the increase of fracture toughness value.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.91-97
• /
• 2022

Pipes transport and supply fuel in various categories; however, corrosion occurs because of the external environment, impurities are mixed in the fuel, and substances leak to the outside, which can lead to serious accidents. Therefore, in this study, inspection equipment using a laser scanner was manufactured to classify conditions according to the degree of corrosion of the outer wall of the pipe, and the corrosion height and maximum value of the pipe were obtained from the surface information. Using the k-means method, it was classified into four states, and the standard of the average height and maximum height of corrosion for each state was derived.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.123-128
• /
• 2024

Major countries are trying to expand the construction of smart factories by introducing ICT such as the Internet of Things, cloud, and big data into the manufacturing sector to secure national-level manufacturing competitiveness in the era of the 4th industrial revolution. In addition, Germany is pushing for Industry 4.0 to build a fully automatic production system through the Internet of Things, and China is pushing for the expansion of smart factories to enhance the country's industrial competitiveness through Made in China 2025, Japan's intelligent manufacturing system, and the Korean government's manufacturing innovation 3.0. In this study, considering the increasing security connectivity of smart factories, we would like to identify security threats in the external connection part of smart factories and suggest security enhancement measures based on domestic and international standard security models to respond to the identified security threats. Eventually the proposed method can be applied by accurately identifying the smart factory security status, diagnosing vulnerabilities, establishing appropriate improvement plans, and expanding security strategies to respond to security threats.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2875-2880
• /
• 2024

The development of nuclear power plants is in three phases. The first phase is a consideration before the decision on the NPP construction program is approved, the second phase is the preparatory work for making contracts and preparing for the construction of NPP after the NPP construction policy is approved, and the third phase is contracting, licensing and building the first NPP. As a volcanically active country, Indonesia contains over 130 active volcanoes that are part of the Pacific Ring of Fire. The volcanic aspect is one of the safety factors considered while deciding the location of an NPP. Research on the potential of natural external risks to the determination of nuclear power plants in Indonesia, including the volcanic aspect, has been conducted based on the safety reference or safety guide of the IAEA and the Nuclear Energy Regulatory Body (BAPETEN) Regulation. Due to technological advancements, safety needs have evolved so the existing Indonesia National Standard (SNI) must be updated to comply with BAPETEN regulations. The substance in SNI 18-2034-1990 relating to volcanic features seems less relevant in actual conditions, given that more complete and exact criteria for determining a site guarantee the safety and health of residents and surrounding the environment site. The study intends to conduct a gap analysis of volcanic issues in SNI and volcanic regulations. The method used is identification requirements for volcanic aspects in SNI 18-2034-1990 about Determining Site of Nuclear Reactor Guidance with BAPETEN Chairman Regulation (BCR) number 4 of 2018 about Nuclear Installation Site Evaluation Safety Provisions and BCR number 5 of 2015 about Evaluation of Nuclear Installation Sites for Volcanic Aspects, and analysis uses a qualitative method of inductive techniques. The outcome of this research applies to suggesting a revision of SNI number 18-2034-1990, especially the volcanic aspect.