• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.117-129
• /
• 2005

The purpose of this study was to characterize the impact shock wave and its attenuation, and the kinematic response of the lower extremity's joints to the impact shock during downhill running in which the lower extremity's extensor acts dominantly. For this study, fifteen subjects(mean age:$27.08{\pm}4.39$; mass:$76.30{\pm}6.60$; height:$177.25{\pm}4.11$) were required to run on the 0% grade treadmill and downhill grades of 7%, and 15% in random at speed of their preference. When the participant run, acceleration at the tibia and the sacrum and kinematic data of the lower extremity were collected for 20s so as to provide at least 5 strides for analysis at each grade. Peak impact accelerations were used to calculate shock attenuation between the tibia and sacrum in time domain at each grade. Fast Fourier transformation(FFT) and power spectral density(PSD) techniques were used to analyze impact shock factors and its attenuation in the frequency domain. Joint coordinate system technique was used to compute angular displacement of the ankle and knee joint in three dimension. The conclusions were drawn as fellows: 1. Peak impact accelerations of the tibia and sacrum in downhill run were greater than that of 0% grade run, but no significant between conditions. Peak shock of PSD resembled also in pattern of peak impact acceleration. The wave of impact shock attenuation between the tibia and sacrum decreased with increasing grade, but didn't find a significant difference between grade conditions. 2. Adduction/abduction, flexion/extention, and internal/external rotation of the ankle and knee joints at support phase between grade conditions didn't make much difference. 3. At grade of 7% and 15%, there were relationship between the knee of the flexion/extension movement and peak impact acceleration during heel strike and found also it in the ankle of plantar/dorsiflexion at grade of 15%.

• Journal of Aerospace System Engineering
• /
• v.6 no.1
• /
• pp.26-32
• /
• 2012

A shock absorber with magnetic effects is suggested for a lunar space-ship expected to launch in 2025. The device consists of a copper steel combined tube, two magnets, and a piston. The piston is designed to move a magnet through the tube when it is pushed by an external impact. While the magnet is moving in the tube, it generates the eddy current force with the copper part of the tube and it also makes the large friction force with the steel part of the tube. Beside, it gets resistive forces against its movement such as the magnetic force with a steel-ring at the first time of the movement and the repulsive force with a same pole opposed magnet at the end time of the movement. In this thesis, results of analyses and experiments of each force are represented and the expected performance of the electromagnetic shock absorber is drawn from the results.

• Journal of Information Technology Services
• /
• v.16 no.2
• /
• pp.129-138
• /
• 2017

This paper is concerned with an Internet of Things (IoT)-based unmanned home-delivery box system, in which the system is developed with a prototype using a weight sensor, shock sensor, the Arduino and Raspberry-Pi of open-source hardware platforms. The developed system provides several functions such as a safe storage means, prevention of delivery-theft, and remote control of the home-delivery box, etc. Specifically, the system recognizes the arrival of goods by detecting the weight of deliveries and sends the arrived message of deliveries to the recipient' smartphone, and also controls (i.e., open and close) the locker of the unmanned home-delivery box system remotely with the smartphone. Furthermore, the developed system provides automatically a warning alarm around the unmanned home-delivery box when an external shock is applied to the home-delivery box, and sends a message on the shock to the recipient' smartphone. The major functions of the developed home-delivery box system have been verified in a realistic environment, and confirmed to work well. With the application of the developed home-delivery box system to the homes and offices where recipients are always not to stay, it is expected to significantly improve the safety of delivered goods as well as to effectively prevent the delivery operatives posing as a crime.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.203-210
• /
• 2021

Difficulties in treating chronic prostatitis cause physical pain and mental problems not only for the treating doctor, but also for the patient. Accordingly, the device of the present research was developed to help patients suffering from prostate symptoms due to the vibration effect of shock wave energy caused by thermal and mechanical interaction of the external shock wave. The purpose of this study is to provide an effective treatment means for prostatitis and BPH(Benign prostatic hyperplasia) by devising an extracorporeal shockwave therapy device that effectively applies the heat and vibration effects of concentrated energy by MCU and spiral coil module.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.325-333
• /
• 2020

This study compares the rapidity and subjective convenience of T-AED and SC-AED for health care providers and the general public. Subjects were randomly allocated to T-AED (n=77) and SC-AED (n=79) groups. Each group conducted defibrillation, with subsequent measurement of the rapidity of defibrillation in peri-shock pause, pre-shock pause, hesitation pause, and post-shock pause. Defibrillation and chest compression delay times for both equipment were analyzed by t-test. On conclusion of the experiment, subjects answered a questionnaire on the subjective convenience of defibrillation, as measured for confidence, convenience, and clear decision. Comparisons of subjective convenience analyzed by t-test revealed significantly shortened peri-shock pause (11.22s), pre-shock pause (11.04s), and hesitation pause (2.15s) in the SC-AED group, as compared to the T-AED group (p<0.001). However, no significant differences were observed for post-shock pause values. Comparing subjective convenience, confidence (T-AED: 7.62±1.25VAS vs. SC-AED: 7.80±0.98VAS, p=0.358) was not significant, whereas convenience (T-AED: 7.05±1.36VAS vs. SC-AED: 8.95±0.89VAS, p<0.001) and clear decision (T-AED: 6.58±1.73VAS vs. SC-AED: 9.08±0.98VAS, p=0.001) showed statistically significant differences. Our results indicate that compared to T-AED, SC-AED has significantly shortened pauses. Moreover, it is more convenient for the user, and significantly aids in clear decisions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1163-1168
• /
• 2013

The maximum allowable value of loop impedance($Z_s$) to secure the operation of overcurrent protective devices and the safety for indirect contact is a very important in TN-C-S system. The loop impedance is divided into inner loop impedance which consumer can adjust and external loop impedance($Z_e$) which only electric operator can adjust. Thus, an external loop impedance which limits to less than a certain value is a very important factor for human body protection against electric shock in TN-C-S system. The concept of loop impedance($Z_s$) is recently introduced to the domestic, the study about external loop impedance is yet insufficient. However, the study about the reference impedance as specified by the IEC 60725 standard to improve the quality and reliability of the power supply is being made. In this paper, reference value of external loop impedance($Z_e$) to meet domestic environment will be proposed by the nationwide measurement and statistical analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.10-17
• /
• 2005

An experimental study was conducted at a Mach number of 2.0 to investigate the buzz suppression method on an axisymmetric, external compression supersonic inlet. The inlet model has a fixed geometry with no internal contraction. The inlet configuration was altered by changing the cowling. Results show that source of buzz has been related to the existence in the flow field of velocity discontinuity across a vortex sheet which originates from a shock intersection point. With external compression inlet, buzz can be suppressed by positioning the oblique shock slightly inside or outside of the cowl.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.15-24
• /
• 2021

In this paper, to analyze the types of surface morphology error according to factors that cause machining error, the experiments were conducted in the ultra-precision diamond machine using a diamond tool. The factors causing machining error were classified into the pressure variation of compressed air, external shock, tool errors, machining conditions (rotational speed and feed rate), tool wear, and vibration. The pressure variation of compressed air causes a form accuracy error with waviness. An external shock causes a ring-shaped surface defect. The installed diamond tool for machining often has height error, feed-direction position error, and radius size error. The types of form accuracy error according to the tool's errors were analyzed by CAD simulation. The surface roughness is dependent on the tool radius, rotational speed, and feed rate. It was confirmed that the surface roughness was significantly affected by tool wear and vibration, and the surface roughness of Rz 0.0105 ㎛ was achieved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.663-668
• /
• 2014

Mechanical and electrical devices in various forms are used in many different fields. These can be exposed to external environmental factors such as shock. Therefore, a shock test machine is commonly used to test these devices and evaluate their shock resistance. In this test, the break-down or permanent deformation and malfunction of inner parts due to a high stress or acceleration can be evaluated. As part of a shock test machine, a velocity generator is needed to create shocks between objects. In this study, a hydraulic velocity generator was conceptually designed and an AMESim model was developed to simulate the velocity under different conditions. Simulation results using this model were compared with the test results from a reduced-size velocity generator, and we designed a velocity generator that fits the target payload and velocity using the simulation results.

• Journal of Korea Trade
• /
• v.25 no.1
• /
• pp.1-17
• /
• 2021

Purpose - The global trend of protectionism has expanded since the onset of US President Donald Trump's administration in 2017. This global phenomenon has led to a significant reduction in world trade volume and a negative impact on economic development in some countries where the external sector accounts for a large proportion of GDP. Although Korea is a country vulnerable to this deteriorating trade environment, few studies have examined the relationship between protectionism and its business cycles based on Korean data. Thus, this paper investigates the impact of protectionism on Korea's business cycle. Design/methodology - To identify future implications, we conduct a structural vector autoregression (VAR) analysis using monthly Korean data from 1994 to 2015. Macroeconomic variables in the model include the industrial production index, inflation rates, exports (or net exports), interest rates, and exchange rates. For the identification of the shock reflecting the expansion of protectionism, we use an antidumping investigation (ADI) data. Since ADIs are followed generally by the imposition of antidumping tariffs, they have no contemporaneous impact on tariffs and are also contemporaneously exogenous to other endogenous variables in the VAR model. We examine two kinds of ADI shocks i) shocks on Korean exports imposed by Korea's trading partners (ADI-imposed shocks) and ii) shocks on imports imposed by the Korean government (ADI-imposing shocks). Findings - We find that Korea's exports decline sharply due to ADI-imposed shocks; the lowest point at the third month after the initial shock; and do not recover until 24 months later. Simultaneously, the inflation rate decreases. Therefore, the ADI-imposed shock can be regarded as a negative shock on the demand curve where both production and price decrease. In contrast, the ADI-imposing shock generates a different response. The net exports decline, but the inflation rate increases. These can be seen as standard responses with respect to the negative shock on the supply curve. Originality/value - We shed light on the relationship between protectionism and Korea's economic fluctuations, which is rarely addressed in previous studies. We also consider the effects of both protective policy measures on imports to Korea imposed by the Korean government and on policy measures imposed by Korea's trading partner countries on its exports.