• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.765-773
• /
• 2016

The vehicle interior noise caused by exterior fluid flow field is one of critical issues for product developers in a design stage. Especially, turbulence and vortex flow around A-pillar and side mirror affect vehicle interior noise through a side window. The reliable numerical prediction of the noise in a vehicle cabin due to exterior flow requires distinguishing between the aerodynamic (incompressible) and the acoustic (compressible) surface pressures as well as accurate computation of surface pressure due to this flow, since the transmission characteristics of incompressible and compressible pressure waves are quite different from each other. In this paper, effective signal processing technique is proposed to separate them. First, the exterior flow field is computed by applying computational aeroacoustics techniques based on the Lattice Boltzmann method. Then, the wavenumber-frequency analysis is performed for the time-space pressure signals in order to characterize pressure fluctuations on the surface of a vehicle side window. The wavenumber-frequency diagrams of the power spectral density shows clearly two distinct regions corresponding to the hydrodynamic and the acoustic components of the surface pressure fluctuations. Lastly, decomposition of surface pressure fluctuation into incompressible and compressible ones is successfully accomplished by taking the inverse Fourier transform on the wavenumber-frequency diagrams.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.375-381
• /
• 2007

A novel method to register images onto 3D data, such as 3D point cloud, 3D vectors, and 3D surfaces, is proposed. The proposed method estimates the exterior orientation of a camera with respective to the 3D data though fitting pairs of the normal vectors of two planes passing a focal point and 2D and 3D lines extracted from an image and the 3D data, respectively. The fitting condition is that the angle between each pair of the normal vectors has to be zero. This condition can be represented as a numerical formula using the inner product of the normal vectors. This paper demonstrates the proposed method can estimate the exterior orientation for the image registration as simulation tests.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.1
• /
• pp.110-115
• /
• 2016

The need for high-strength galvanized steel has recently increased because of the increased number of car consumers who want improved efficiency and exterior quality. High-strength galvanized steel with high corrosion resistance improves the durability of products and exterior quality. Furthermore, the gilt of zinc does not come off during machining because of the fine adhesive property of zinc. When these are welded, zinc has a lower melting temperature than iron, so zinc is more quickly vaporized than iron. Vaporized zinc can stick to electrodes, which increases spatter in welding transportation. Created spatter can enter the molten pool and develop into inner defects or blowholes and pits. Scattered spatter sticks to the product, which leads to the secondary cost of spatter removal. Therefore, in this study, comparisons of amounts of spatter generated are conducted according to the composition of shielding gas in the MIG and CMT processes to find optimal welding parameters.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.53-54
• /
• 2021

Grenfell Tower was renovated in 2014 and 2016 at a high cost to replace the exterior materials, windows and co-heating facilities of the building. The exterior materials used during the repair work were sandwich panels filled with polyethylene and plastic, which were expanded on the aluminum metal surface. It is a product called Celotex RS 5000, a low-resolution but inexpensive repair material, and is currently an external material that cannot be used in high-rise buildings. Similar domestic fire cases began to focus social attention on the safety of high-rise buildings through the Busan Residential Complex Fire (2010), Uijeongbu Urban Living Housing Fire (2015), and Ulsan Residential Complex Fire (2020), and residents' safety concerns are increasing. In Korea, the occurrence and risk of similar fires are high, so setting up fire prevention measures through fire case investigation is considered the most basic measure in securing human safety. Therefore, the purpose of this study is to examine the status of fire damage caused by domestic and foreign eruptions, domestic and international research status and related regulations on external materials and windows starting from the Grenfell Tower fire in England.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.341-344
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But. using, transporting, and keeping of plastic component was happened post-deformation. As time goes by and temperature is changed, the post-deformation causes the problems of exterior design and performance. But, it is difficult to estimate the post-deformation by only thermal deformation analysis. Also, the estimation technique of the pest-deformation must be easily applied to product development and it should be reliable because development time of product is limited. In the paper. the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.81-87
• /
• 2005

This project addresses the product identification and design application of corrugated products for kinetic architectural applications. Initially, an architectural approach to product identification was carried out with the end goal of demonstrating application design principles of numerous novel architectural examples from the forest products industry. A design and prototyping stage followed demonstrating such application design principles and functional analysis on various novel architectural examples. The results of coupling product identification with proven application advantages will be of potential value not only to architecture but also to other designers in the arts and sciences. The general motivation for the research arises out of a growing interest corrugated and paper products to be ideally suited for various architectural applications for their unparallel environmental benefits. Applications in architecture that use fewer resources and that adapt efficiently to complex and changing conditions are particularly relevant for an industry (architecture) that is increasingly aware of its environmental responsibilities. Corrugated and paper products are highly under-utilized by the building industry as design choice material for both interior and exterior applications. An increased awareness of the benefits of corrugated and paper products coupled with a process of designing for the total use and reuse will prove to be a valuable means by which issues of energy efficiency and environmental quality of buildings could be enhanced to be more efficient, affordable, and therefore reach a broader audience of users.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.81-85
• /
• 2011

Recently, the electronic parts are to be thinner plate, smaller size, light weight material and CPU, HDD and DRAM in all the parts have been produced on the basis of the high speed and greater capacity. Also, conventional goods have replaced a LED (Light-Emitting Diode) in lighting products so; such industry devices need to have cooling. To maximize all the performance on the heat-radiated products, the area of heat-radiated parts is required to be cooled for keeping the life time extension and performance of product up. Existing cooling systems are using radiant heat plate of aluminum, brass by extrusion molding, heat pipe or hydro-cooling system for cooling. There is a limitation for bringing the light weight of product, cost reduction, molding of the cooling system. So it is proposed that an alternative way was made for bringing to the cooling system. EP (Engineering Plastic) of low-cost ABS (Acrylonitrile butadiene styrene Resin) and PC (Polycarbonate) was coated with brass and the coating made the radiated heat go up. The performance of radiant heat plate is the similar to the existing part. We have studied experimentally on the radiated heat plate for the light-weight, molding improvement and low-cost. From now on, we are going to develop the way to replace the exiting plate with exterior surface of product as a cooling system.

• Archives of design research
• /
• v.19 no.3 s.65
• /
• pp.105-116
• /
• 2006

In product manufacturing industries, a recent issue is the green concept. The green concept is a complicated area. If the green concept is for products, its serious issues have to be criticized. Although the importance of the green concept has overflowed, its influences have not been disputed vigorously. So this study is to critic the serious issues of the green concept in aesthetics in product design, manufacturing, and products' prices. The green environment has four representative elements: systems, policies, minds, and technologies, but they are not in the field of design. An element of the green concept, green design is also a sub concept for design, so it should be based on aesthetics. It is green aesthetics. But since green design first appeared, it has never approached by aesthetics because it has mostly had social meanings and expectations. So for green aesthetics, to think about what makes a product, and what can be aesthetic issues among them are important. Products consist of form, structure, material, and technology. Form means different shapes in a structure, but there cannot be any specific directions for a green concept. Structure has two kinds: interior and exterior structure. While interior structure has a technological character, exterior structure is deeply related with aesthetics, but it has also no chance for green concept. Material can be divided as two also: aesthetic and technological. Aesthetics materials mean the colors, opacity, and tactile sense of materials, but they are not aesthetic issues. Technological materials are recycled materials or non-recycled materials. Even if recycled materials are used today, they are close to systems or policies rather than aesthetics. With this result, green aesthetics is a very difficult concept. Second, green products are usually 30% more expensive than general products. But every consumer has his or her own economical conditions, and nobody can coerce consumers into buying expensive green products for green environments. And green products without good quality cannot satisfy consumers. This means that green concept is not accomplished by just manufacturing green products. Third, although a lot of proposals have appeared as green design in exhibitions, most of them are close to craft because they are so hard to be manufactured. Manufacturing is the first consideration for products. These three issues are enough to explain why green concept is complicated in manufacturing products. If they are not solved, the green concept is just a fiction. So if this study proposes a turning point against blind green-oriented atmosphere, it will be meaningful enough.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.489-496
• /
• 2011

In designing cultural product, end user experiences, feelings and satisfaction with form are one of the most important factors. However, the design processes of cultural product typically depend on traditional methods or intuitive, designer driven methods for generating and evaluating form concepts. We applied sensibility evaluation, analysis method and contemporary digital vehicle design process to cultural product. This paper describes the implementation process of internet based design support system that helps assess user's sensibilities of forms created in each stages of design process. The form focused sensibility evaluation approach provides designers with fast and various feedbacks about their design in each stage. Practical application for exterior design of tourist cart of slowcity(ciitaslow) Shinan was illustrated.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.273-289
• /
• 2021

This study aimed to examine the appearance of heated clothing in relation to fashion trends by analyzing constructive components of clothing using product images and actual products. A total of 91 images of domestic and foreign heated clothing products were collected, and a product analysis conducted with six parameters of item classification, namely, concept and image, silhouette, color, number of heating elements, and heating parts. In addition, an in-depth analysis was carried out with 11 products among them, while focusing on further detailed components of the design and heating system. As a result, the overall exterior design of domestic products has been changed from outdoor clothing to daily clothing reflecting the current design trend. Compared with domestic products, foreign products showed a diverse assortment and a greater number of heating regions per individual item of clothing. The current heating system commonly consists of a heating element, power source, controller board, and wires, although the existence and type of switches differed from product to product. To develop a more efficiently heated clothing to expand the market, the design, ease of use, safety, consumer preference, heating functionality, and durability should be considered. Along with design recommendations for future heated clothing, this study also provides a practical guide to the technical aspects of the design of the components of heated clothing.