• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.4
• /
• pp.71-81
• /
• 2020

The purpose of this study is to propose the planning methods for pollution prevention in the initial design stage by identifying the pollution phenomena on the exterior of the building. It is important to catch the problem early on because exterior troubles begin with an initial design defect and causes rapid aging. The scope of this study is seoul public borough offices that should be sustainable for long as landmark located at the center of the district. Field survey was conducted three times in six months. Twenty-six borough offices were diagnosed with three levels of contamination through visual inspection and the contaminated locations, types, materials, and characteristics were checked. Fourteen common contaminated locations were identified in the first and intensively rechecked in the second. Five locations vulnerable to contamination were designated and the contamination and cleanliness situations were checked by location in the third. As a result, main polluted types and locations are sloping wall, upper wall, protruded wall, canopy, and wall under window. The key to avoiding these pollution problems is to minimize the horizontal plane on which dust can be deposited. In other words, it can be considered variously by shape and location, such as the slope of the horizontal plane, the floating of the surface, the installation of the roof surface, and the vertical louvers. And throating plans and material plans suitable for each location are presented. Various methods of the shape and location, material are expected to use as useful basic data for preventing pollutions during the initial design stage.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.293-296
• /
• 1999

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2069-2079
• /
• 2004

This paper represents the description of a complex mathematical model of biomechanical interaction for human-rifle system during shooting. The model is developed by finite element method using bar elements. And three typical shooting positions, i.e. standing, kneeling and prone are used. Characteristics of interior/exterior ballistics and behaviors of human-rifle system are evaluated by this model, which takes into account the influence of environment, bullet, powder, barrel geometry parameters and anthropological parameters. The results of this study can be applied to anthropology, biomechanics, medical science, gait analysis, interior ballistics and exterior ballistics.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.787-798
• /
• 2017

In the present study, the interior orientation parameters were computed by using various kinds of methods. Five DSMs (Digital Surface Models) in total were produced by applying interior orientation parameters to the image processing, and the accuracy was evaluated. In order to use interior orientation parameters as independent variables of DSM accuracy, flight parameters and exterior orientation parameters that can affect the accuracy of DSM were set to be the only fixed variables. From the results of the present study, the RMSE of campaign 3-2 was found to be 0.0305 m, which was the most favorable result. Thus, it is advisable to produce DSM by adjusted interior parameters after figuring out the interior orientation parameters using a camera calibration program at laboratory environment.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.310-314
• /
• 2008

The light from the exterior considerably deteriorates the performance of displays including PDP (plasma display panel). Thus semi-conductor industries have developed a special optical film that can block or absorb the exterior light. In this paper, we propose a new inspection system for tracing the defects of the film. Our system is able to inspect a $1.5\;m\;{\times}\;1\;m$ area for 10 sec with $127\;{\mu}m\;{\times}\;50{\mu}m$ spatial resolution.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.2
• /
• pp.49-56
• /
• 2007

The aim of this study is actual conditions to analyse of community center in Cheongweon-gun and propose operation method. In this study, I deduced some problems and proposed improvement planing corresponded to new needs through such as external appearance, inner space analysis, operating actual conditions analysis and etc., of existing community center in Cheongweon-gun. And I wish to present more efficient architectural space organization and operation method with these surveying results. The result of this study are as follows; Community center as representative community facilities is necessary to reflect of village characteristics on the exterior of buildings, and decision of scale and usage considered number of residents, visitors, and ages. For management of the community center, it is necessary of sustainable obtain of management cost, and provision against rebuilding and enlargement of building.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.189-198
• /
• 2019

In photogrammetry, single photo resection is a method of determining exterior orientation parameters corresponding to a position and an attitude of a camera at the time of taking a photograph using known interior orientation parameters, ground coordinates, and image coordinates. In this study, we proposed a single photo resection algorithm that determines the exterior orientation parameters of the camera using cosine law and linear equation-based three-dimensional coordinate transformation. The proposed algorithm first calculated the scale between the ground coordinates and the corresponding normalized coordinates using the cosine law. Then, the exterior orientation parameters were determined by applying linear equation-based three-dimensional coordinate transformation using normalized coordinates and ground coordinates considering the calculated scale. The proposed algorithm was not sensitive to the initial values by using the method of dividing the longest distance among the combinations of the ground coordinates and dividing each ground coordinates, although the partial derivative was required for the nonlinear equation. In addition, since the exterior orientation parameters can be determined by using three points, there was a stable advantage in the geometrical arrangement of the control points.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.553-558
• /
• 2002

Physical sensor model in pushbroom satellite images can be made from sensor modeling by rotation parameters and attitude parameters on the satellite track. These parameters are determined by the information obtained from GPS, INS, or star tracker. Provided from satellite image, an auxiliary data error is connected directly with an error of rotation parameters and attitude parameters. This paper analyzed how obtaining satellite images influenced errors of rotation parameters and attitude parameters. furthermore, for detailed analysis, this paper generated simulated satellite image, which was changed variously by rotation parameters and attitude parameters of satellite sensor model. Simulated satellite image is generated by using high-resolution digital aerial image and DEM (Digital Elevation Model) data. Moreover, this paper determined correlation of rotation parameter and attitude parameters through error analysis of simulated satellite image that was generated by various rotation parameters and attitude parameters.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.323-330
• /
• 2005

More than ten years after the era of GPS-Photogrammetry which could provide us only three projection center of all six exterior orientation parameters, direct georeferencing with GPS/INS is now becoming a standard method for image orientation. Its main advantage is to skip or reduce the indirect ground control process. This paper describes the experimental test results of integrated sensor orientation with a commercial GPS/IMU system to approve its performance in determination of exterior orientation. For this purpose two different imaging blocks were planned and the area was photographed at a large photo scale of 1:5,000 and a medium photo scale of 1:20,000. From these data set a variety of meaningful results was acquired, i.e., the accuracy. potential of exterior orientation from direct georeferencing and combined block adjustment using these data considering different photo scales and conditions.