• 한국환경생태학회지
• /
• 제23권6호
• /
• pp.528-534
• /
• 2009

국제적 멸종위기종이며, 동아시아에 국한하여 분포하는 섬개개비(Locustella pleskei)는 한국의 추자도, 마라도, 칠발도, 홍도 등에서 번식하는 것으로 알려져 왔으나, 구체적인 번식 정보는 아직 알려져 있지 않다. 본 연구는 마라도(N $33^{\circ}$ 06', E $126^{\circ}$ 16')에 번식하는 섬개개비의 번식 현황과 번식지 특성을 파악하기 위하여 실시되었다. 2008년 5월부터 9월까지 섬개개비 총 11쌍이 번식하는 것을 확인하였고, 번식하는 둥지는 곰솔숲의 관목층에 주로 분포하였다. 둥지는 곰솔숲의 관목층에 주로 분포하였으며, 동백나무(Camellia japonica)와 돈나무(Pittosporum tobira) 등 관목성 나무를 둥지목으로 선호하는 것으로 나타났다. 둥지목의 수고는 $2.77{\pm}1.10m$, 지면으로부터 둥지의 높이는 $1.75{\pm}0.56m$였으며, 둥지목의 수고는 다른 주변의 나무보다 낮은 것으로 나타나 마라도의 강한 해풍을 피하는데 유리한 것으로 판단되었다. 주로 억새잎이나 사초과 식물의 잎을 이용하여 밥그릇 형태의 둥지를 만들었으며, 둥지의 지름은 $11.9{\pm}0.5cm$, 높이는 $11.1{\pm}1.1cm$, 깊이는 $5.8{\pm}0.4cm$로 나타났으며, 산좌지름은 6.0cm였다. 마라도에서 섬개개비는 다른 섬지역보다 번식시기가 다소 늦었으며, 한배산란수는 3개로서 보통 다른 번식지의 4-5개보다 작았다. 이는 번식시기가 늦어질수록 한배산란수가 적어지는 일반적인 경향을 따르는 것으로 보인다. 이상의 결과로 볼 때, 마라도 곰솔숲의 솎아베기와 관목층 제거는 밀집된 관목층을 둥지로 선호하는 섬개개비의 번식에 영향을 미칠 수 있다. 따라서 섬개개비 번식 생태 및 서식지에 지속적이고 체계적인 조사가 요구되며, 숲가꾸기 수행에 있어서도 섬개개비의 보전을 위한 세심한 배려가 필요하다.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.126-131
• /
• 2009

A $CO_2$ heat pump system was designed for both cooling and heating in the cabin of electric vehicles, hybrid vehicles or fuel cell vehicles, In this study, the performance characteristics of the heat pump system without any supplementary heating device were analyzed and the heating performance was compared with the cooling performance for various operating conditions. Experiments were carried out by changing the speed of electric drive compressor, the air flow rate of interior heat exchanger and the air inlet temperature and speed of exterior heat exchanger. Therefore, the cooling/heating capacities and the corresponding COPs are quantified. Also, the heat pump system showed an improved performance for the cooling operation and the heating operation. In this study, the experimental results can be used to evaluate the effect of system design changes on system performance as well as the development of a highly efficient heat pump system.

• 교육시설 논문지
• /
• 제19권1호
• /
• pp.25-35
• /
• 2012

The function and the role of school are changing according to various future-oriented education models such as open-ended learning cycle, community learning center, re-schooling, network system and de-schooling, which reflect recent social demands related to discussions on sustainability, low birth rate and ageing. what changes to our school buildings have been there? This study is aimed that shows the architectural change of school buildings and environments in 2000's. It reveals the architectural tendancy through some school buildings, 'the excellent facility school award' winner which Ministry of Education, Science and Technology have chosen annually since 1998. In the past decade, it is outstanding change that mass composition, window patterns and exterior wall materials are diversified greatly. The most of them have a opened main hall and multi-purpose spaces which give effective educational environment to students. Although visual changes are outstanding, we still need qualitative educational space program and improved school building design according to future-educational demands.

• 사상체질의학회지
• /
• 제26권1호
• /
• pp.27-36
• /
• 2014

Objectives This research was proposed to present Clinical Practice Guideline(CPG) for Soeumin Disease of Sasang Constitutional Medicine(SCM): Congestive Hyperpsychotic symptomatology. This CPG was developed by the national-wide experts committee consisting of SCM professors. Methods First, it was performed that search and collection of literature related SCM such as "Dongeuisusebowon", Textbook of SCM, Clinical Guidebook of SCM and Fundamental research to standardize diagnosis of Sasang Constitutional Medicine. And journal search related clinical trial or Human complementary medicine of SCM was performed domestic and overseas. Finally, no article was selected and included in CPG for Congestive Hyperpsychotic symptomatology of Kidney Heat-based Exterior Heat disease in Soeumin disease. Results & Conclusions CPG of Congestive Hyperpsychotic symptomatology in Soeumin Disease include classification, definition and standard symptoms of each pattern. Congestive Hyperpsychotic symptomatology is classified into mild and severe pattern by severity. Congestive Hyperpsychotic symptomatology mild pattern is classified into initial pattern. Congestive Hyperpsychotic symptomatology severe pattern is classified into intermediate and advanced pattern and Greater Yang disease Reverting Yin pattern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.386-389
• /
• 2006

BIPV(Building Integrated PV) system can expect dual effects that reduce expenses for establishment of PV system by adding new function as outer covering material of building expect producing the electricity. In case of PV(photovoltaic system) there are many generation differences according to the exterior environmental facts(solar cell array, design and installation condition of interactive inverter system). In this paper, we compared constitute factors of 3kW BIPV(solar cell module, inverter), operating characteristic and total system characteristic(utilization, generation efficiency, loss fact) and found out long time operating data using a watch instrumentations. By use of long time operating result, compare a totally operating characteristics, and we proposed a next building application of BIPV. BIPV system that is proposed in this paper, was established in Solar Energy research center of Chosun University, composed with system. The objective of this paper, is to provide a efficient BIPV design method through the considerations for the integration of PV system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.869-881
• /
• 1999

Inchon International Airport Elevated Road Way is located between the Passenger Terminal Building and Transportaion Center which are Inchon International Airport core construction projects. The deck of the bridge is consists of 5-span or 6-span continuous pre-stressed concrete slab. Steel form has been used to enhance the quality of texture on concrete slab. Steel form has been used to enhance the quality of texture on concrete surface, lower surface of deck slab with the two way arch has been manufactured by highly professional manner in order to get an beautiful exterior architectural looks. The prestressed concrete deck slab is mass concrete structures with a high-specified concrete strength and a varying section in the range of 0.95-2.8m thickness. Therefore high risks of thermal cracking occurrence by heat of hydration highly are expected. To resolve such problem, we adopted type 1 cement and pipe cooking method at construction site through mass concrete specimen test and 3-dimensional analysis. For Pipe cooling we used 25mm diameter stainless pipes with wrinkles. Cooling pipe with spacing 50-60cm has been installed. And continuous pipe cooling with cooling water of 15$^{\circ}C$ was conducted for 2days. In present 8 span of all 29 spans construction has been completed. No thermal cracking heat hydration has been observed yet.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제21권1호
• /
• pp.33-50
• /
• 2007

본 연구에서는 S대학부설 과학영재교육에서 교육받고 있는 수학영재아들을 대상으로 설문조사를 실시하고 이를 바탕으로 수학영재아, 부모, 교사 면담을 실시하여 영재성, 영재교육의 필요성, 인과적 귀인 등에 관한 그들의 관점을 조사하였다. 그 결과, 다음을 확인하였다. 첫째, 영재아들의 부모나 교사는 지적 능력을, 영재아들은 창의성을 영재성의 가장 중요한 요소라고 생각하였다. 둘째, 영재아들은 교육환경에 따라 서로 다른 의사소통 능력을 보인다. 셋째, 수학영재아들은 자신의 영재성이나 문제해결능력을 내적요인에 귀인하는 반면, 부모나 교사는 외적요인에 귀인한다.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.9-19
• /
• 2010

Every car manufacturer desires to reduce the new car development time spent in improving the safety, NVH, lightweight, reliability and environment friendly features of the car. Other considerations such as planning, exterior and interior styling, packaging, color, and material selection increase the complexity of the car design process. This paper proposes a personal DDP (Digital Design Process) to utilize the engineering analysis and design/styling software for car design. DDP can be efficiently used by a team of car research center or a studio with small number of engineers, helping ordinary engineers becoming ambidextrous in design as well as engineering applications. The concept model starts from idea sketch, rendering, and 3D surface model with CAS (Computer Aided Styling) to the final safety estimation by using proposed DDP based on engineering technology (CAD, CAE). The concept model proposed a hydrogen fuel cell sports coupe which could be available within next 10 years. The proposed DDP can not only reduce the new car development time but also be adapted into designing of varied products such as aircraft, yacht, electrical equipment and sports gear.

• 한국실내디자인학회논문집
• /
• 제26호
• /
• pp.79-87
• /
• 2001

This study is focused on three major museum projects completed during 1990's by Richard Meier who is known as the romantic modernist as well as one of the architects who continue their devotion on completing the fourth dimensional spatial concept through the practice. Main focus of the study will be analyzing the space and design elements shown in the Museum of Contemporary Art (Barcelona, Spain, 1986-95), Museum of Television & Radio (Beverly Hills, CA., 1994-96) and the Getty Center(Los Angeles, CA., 1984-97), and find out the new meaning of museum design suggested by the architect. The analyzation was done based on the actual sight visits and through the acquired references. The museum designs done by Richard Meier show consistency between visual language, use of 'light, space and form' as the design elements to connect interior and exterior to create openness and harmony with surrounding condition. Additionally, greatness of the architectural elevation, efficient use of interconnecting space, adoption of natural light, affective use of the space, careful consideration to the exhibiting items, spread of information centers, balance between large and small exhibition spaces, and his concept on providing choices to the viewer within the museum are the main issues in designing the museum in order to give various spatial experience to the visitors.

• 한국농촌건축학회논문집
• /
• 제12권3호
• /
• pp.19-26
• /
• 2010

This study is aimed to look into the craftsmanship non-educated constructors in Korean-style secondary stations(Gong-So) of Naepo region which is located in the northwestern Chungcheongnam-do. Although the area was persecuted as one of three cradles of Korean Catholicism, Catholic activities flourished there. The 13 cases of Korean-style secondary stations were selected through a survey report list about modern cultural assets of Chungcheongnam-do published in december 2004. This study examined the methods of plan layout and framework of Gong-So to look into craftsmanship of non-educated constructors, the results are as follows; The methods of plan layout are divided into three types according to existence and arrangement of inner column(Nae-Ju); 'Layout with Nae-Ju' is considered as the primary form of Korean-style Gong-So with using regular Nae-Ju. 'Layout with the different position of the center between Nae-Ju and exterior column(Oe-Ju)' and 'layout without Nae-Ju' is appeared in Korean-style Gong-So which is important to assembly and alter function. The methods of framework are appeared variously according to different plan layout for securing worship space. The unusal beam(Chung-Ryang) is used to solve different spans of altar and narthex. When space was formed widely without Nae-Ju, diagonal members and M letter type rafters are used, they are influenced by the technique of western wooden roof truss.