• Title/Summary/Keyword: exterior center

Search Result 190, Processing Time 0.025 seconds

Surface Appearance of Galvanized Steel with Outdoor Exposure Testing in Korea for 36 Months (36개월간 국내 옥외폭로시험에 따른 아연도강의 표면외관 변화)

  • Kim, K.T.;Kim, Y.S.
    • Corrosion Science and Technology
    • /
    • v.17 no.6
    • /
    • pp.301-309
    • /
    • 2018
  • If galvanized steel is exposed to an outdoor environment, atmospheric corrosion will occur with time and red rust will form when the sacrificial protection capacity of zinc reaches its limit. With corrosion, the surface appearance of steel changes, and the properties of the exterior materials degrade. In this study, two kinds of galvanized steel, (GA and GI specimens) were subjected to an outdoor exposure test for 36 months in six regions of Korea. Chrominance (color, chroma, and brightness) and glossiness surface analyses were performed. The color change was not significant, regardless of the exposed area or the specimens tested. With increasing exposure times, the GA specimen became blackened by the formation of zinc oxide, and red coloration was increased by the formation of red rust. As the exposure time of GI specimen increased, the surface proceeded to blacken, but no red rust was formed and the color did not change significantly. Regardless of the outdoor exposure area or the specimen, longer exposure times led to lower glossiness, and this behavior appears to be influenced by the formation of zinc oxide.

Health Supportive Design in Elderly Care Homes: Swedish Examples and their Implication to Korean Counterparts

  • Lee, Sookyoung;Dilani, Alan;Morelli, Agneta;Byun, Hearyung
    • Architectural research
    • /
    • v.9 no.1
    • /
    • pp.9-18
    • /
    • 2007
  • The objective of this research study was twofold; 1) to explore and identify health supportive design factors in Swedish elderly care homes and 2) to understand their usefulness and suggest implication in Korean elderly care settings. A descriptive and explorative method was applied using a combination of field studies and semi-structured interviews. Three study trips were carried out during Sept. $14^{th}$ and Oct. $12^{th}$ 2005; two facilities situated in Stockholm suburbs and one in the south of Sweden. According to this research, the valuable factors to support health and well-being for the elderly are as follows; 1) Community integration: These elderly care homes are generally places close to a residential area center or a city center. Services are often shared between residents and community members at large, consequently there is a flow of "visitors" of all ages connecting with the facility on a daily basis. 2) Homelike environment: A noteworthy aspect of Swedish elderly care homes is keeping the facility appearance as homelike as possible. The associations with home may be explored through the appearance and configuration of both the exterior and interior of the building. These homes seemed to be designed with a conscious aim to create a homelike setting. 3) Small scale approach: Clustering of resident rooms is one method through which the small scale approach can be achieved in larger facilities. With unit clusters, the facility can foster opportunities for social interactions among resident. 4) Accessibility to garden and nature: The courtyard is a well developed concept in planning elderly care homes in Sweden. They are generally safe and easily accessible to the residents. Studying Swedish models may provide practical knowledge of how the physical setting may improve resident's health in Korean elderly care homes.

Properties of the Twenty-seven Pulses in DongUiBoGam Based on the Eight Important Pulses (팔요맥을 중심으로 살펴본 『동의보감』 27맥 속성 연구)

  • Lee, Taehyung;Jung, Won-Mo;Go, Byeongho;Park, Hi-Joon;Kim, Namil;Chae, Younbyoung
    • Korean Journal of Acupuncture
    • /
    • v.32 no.4
    • /
    • pp.151-159
    • /
    • 2015
  • Objectives : Pulse diagnosis is considered particularly important among several methods of diagnosis in DongUiBoGam. In spite of its importance, numerous and various pulse descriptions made it difficult to learn and practice pulse diagnosis. In this article, we tried to analyze properties of the twenty-seven pulses from pulse diagnosis cases from DongUiBoGam to enable the practical understanding of pulse diagnosis. Methods : We constituted the four axis according to the eight important pulses. And we analyzed properties of the twenty-seven pulses through the relationship between the four pairs of important pulses and the twenty-seven pulses. To quantify the relevances of important pulses to the twenty-seven pulses, we used the term frequency-inverse document frequency(TF-IDF) method. Results : We could elicit properties of the twenty-seven pulses according to the four axis. Also, we reexamined the categorization of the seven exterior pulses / the eight interior pulses and the similar pulses from DongUiBoGam with the analysis results. Conclusions : We could understand properties of the twenty-seven pulses more specifically with the eight important pulses. And we also could see the relationship among the twenty-seven pulses on each axis. However, the limitation arising from insufficient number of pulse diagnosis cases in this research requires further research with more sources such as other traditional medical records or clinical records in the present time.

THE PROCESSING OF CLUMPY MOLECULAR GAS AND STAR FORMATION IN THE GALACTIC CENTER

  • LIU, HAUYU BAOBAB;MINH, YOUNG CHOL;MILLS, ELISABETH
    • Publications of The Korean Astronomical Society
    • /
    • v.30 no.2
    • /
    • pp.133-137
    • /
    • 2015
  • The Galactic center uniquely provides opportunities to resolve how star clusters form in neutral gas overdensities engulfed in a large-scale accretion flow. We have performed sensitive Green Bank 100m Telescope (GBT), Karl G. Jansky Very Large Array (JVLA), and Submillimeter Array (SMA) mapping observations of molecular gas and thermal dust emission surrounding the Galaxy's supermassive black hole (SMBH) Sgr $A^{\ast}$. We resolved several molecular gas streams orbiting the center on ${\gtrsim}10$ pc scales. Some of these gas streams appear connected to the well-known 2-4 pc scale molecular circumnuclear disk (CND). The CND may be the tidally trapped inner part of the large-scale accretion flow, which incorporates inflow via exterior gas filaments/arms, and ultimately feeds gas toward Sgr $A^{\ast}$. Our high resolution GBT+JVLA $NH_3$ images and SMA+JCMT 0.86 mm dust continuum image consistently reveal abundant dense molecular clumps in this region. These gas clumps are characterized by ${\gtrsim}100$ times higher virial masses than the derived molecular gas masses based on 0.86 mm dust continuum emission. In addition, Class I $CH_3OH$ masers and some $H_2O$ masers are observed to be well associated with the dense clumps. We propose that the resolved gas clumps may be pressurized gas reservoirs for feeding the formation of 1-10 solar-mass stars. These sources may be the most promising candidates for ALMA to probe the process of high-mass star-formation in the Galactic center.

Modification and Installation Design of Airframe Structures for Performance Improved Aircraft (성능개량 항공기의 기체구조물 개조 및 장착설계)

  • Dae Han Bang;Hyeon Seok Lee;Min Soo Lee;Min Ho Lee;Jae Man Lee
    • Journal of Aerospace System Engineering
    • /
    • v.17 no.4
    • /
    • pp.87-94
    • /
    • 2023
  • This paper addresses the installation and modification design of airframe structures for new and modified equipment installations that are essential for aircraft performance improvement. Typical performance improvement equipment mounted on the exterior of the aircraft include antenna, radar, electro-optical/infrared (EO/IR), and self-protection system equipment, which require structural reinforcement, modification, and mounting design of the green aircraft for operation. In the interior of the aircraft, console and rack structures are modified or added according to user operation requirements. In addition, this is accompanied by the installation design of equipment to be replaced and added for performance improvement, and the according modification of environmental control system components for internal cooling. The engineering process and cases in which airworthiness was verified through the detailed design of airframe structures with structural integrity, operability, and maintainability of performance-improved aircraft are presented.

Analysis of Causes of Casualties in Jecheon Sports Center Fire - Focus on Structural Factors of Building and Equipment - (제천 스포츠센터 화재의 다수 사상자 발생원인 분석 - 건물과 설비의 구조적인 요인을 중심으로 -)

  • Lee, Eui-Pyeong
    • Fire Science and Engineering
    • /
    • v.32 no.4
    • /
    • pp.86-94
    • /
    • 2018
  • A sports center fire in Jecheon caused 29 deaths and 40 injuries. This study focused only on the structural factors of the building and equipment to investigate the causes of casualties based on the fire investigation results at the sports center. The structural factors of the building and equipment were a piloti-type parking lot, lack of a fire compartment between the piloti-type parking lot and lobby, lack of an installed sprinkler system, lack of an installed fire door in the main stairs on the $1^{st}$ floor, lack of an installed fire water tank on the rooftop, an installed pocket fire door in the main entrance on the $2^{nd}$ floor, poor fire compartments in an EPS space and a pipe pit and on each floor, a leak in the joint of a drain pipe, plywood installed in the hoistway of the freight elevator and interior wall, illegal remodeling of a closed rooftop structure, which cannot discharge smoke and heat, installed styrofoam insulation in the inside of the parking lot ceiling, an installed tempered glass window, which cannot be opened in the ladies bathroom on the $2^{nd}$ floor, and a finished dryvit exterior wall.

A Literature study on the Sasang Constitutional Tongue Diagnosis based on Experience Prescriptions(經驗方) in the Donguisusebowon (Longevity and Life Preservation in Oriental Medicine) (동의수세보원(東醫壽世保元) 경험방(經驗方)에 근거한 사상체질별 설진(舌診)의 문헌연구)

  • Lee, Jae-Chul;Kim, Jong-Yeol;Ryu, Hyun-Hee;Kim, Keun-Ho
    • Journal of Sasang Constitutional Medicine
    • /
    • v.22 no.1
    • /
    • pp.1-8
    • /
    • 2010
  • 1. Objectives: This study was performed to research the relationship between Sasang Constitution and characteristics of tongue diagnosis based on Donguisusebowon's Experience prescriptions(經驗方). 2. Methods: We searched tongue diagnosis factors in Donguisusebowon and classified this. Based on Donguisusebowon's Experience prescriptions(經驗方), we find tongue diagnosis factors in 6 contemporary Oriental medicine prescription books. 3. Results: Most So-eumin has white thin tongue coating and clear redish tongue color. Yellow tongue coatings are found in symptoms for Yinjinho-tang(Yinchenhao-tang), Soseungki-tang(Xiaochengqi-tang), Daeseungki-tang(Dachengqi-tang). Shortened Tongue is found in So-eumin's experience prescription and So-yangin's treat histroy. It didn't shown that So-eumin's Semen Crotonis included 6 prescritions' factors of tongue diagnosis. So-yangin's white tongue coating is found in Hyungbangpaedok-san(Jingfangbaidu-san), Sipjo-tang(Shizao-tang), Sosiho-tang(Xiaocihu-tang), Shinki-hwan(Shenqi-wan). Most of other So-yangin's tongue coatings are Yellowish and tongue color is deep red. Tae-eumin have thin white tongue coating at the Mahuang-tang(Mahuang-tang). Red tongue color and drying tongue are found at Jowiseungki-tang(Tiaoweichengqi-tang)Daesiho-tang(Dacihu-tang)Saengmaek-san(Shengmai-san) 4. Conclusions: Following So-eumin's Experience prescriptions, So-eumin's tongue color is clear red and tongue coatings are thin white and greasy. Following So-yangin's Experience prescriptions, So-yangin's tongue color is deep red and tongue coatings are yellowish and scarce except Exterior cold disease. And So-yangin has specific symptom of irritability, oral sores. Tae-eumin's tongue has two sides of white thin tongue coatings and Red and drying tongue.

The Real Scale Fire Tests for Vertical Fire Spread Study of External Finishing Material (외벽 마감재료의 수직화재 확산 연구를 위한 실물화재 실험)

  • Kweon, Oh-Sang;Yoo, Yong-Ho;Kim, Heung-Youl;Kim, Jung-Hyun;Min, Se-Hong
    • Fire Science and Engineering
    • /
    • v.26 no.6
    • /
    • pp.85-91
    • /
    • 2012
  • To reduce human life and property damage at the fire in a building, it is most critical to control flame spread in the early stage. Fire spread prevention measure generally includes fire resistance performance securing of structure member in the arson zone and use limitation based on combustion performance of finishing material. The latter is most fundamental fire safety design to determine flame spread, but domestic combustion test determines combustion performance by specimen sized fire test method. Thus, there are many restrictions in the determination of combustion performance by composite material such as sandwich panel. Especially, outer finishing material uses a variety of composite material such as dry bit, aluminum composite panel, and metal panel compared to inner finishing material. Therefore, this study would determine vertical fire spread features by a full scaled fire experiment through the test method of ISO 13785-2, an international test standard.

Power System Development of Unmanned Aerial Vehicle using Proton Exchange Membrane Fuel Cell (고분자 전해질 연료전지를 이용한 무인비행체 동력시스템 설계)

  • Jee, Yeong-Kwang;Sohn, Young-Jun;Park, Gu-Gon;Kim, Chang-Soo;Choi, Yu-Song;Cho, Sung-Baek
    • Journal of Hydrogen and New Energy
    • /
    • v.23 no.3
    • /
    • pp.250-255
    • /
    • 2012
  • In this paper, the development and performance analysis of a fuel cell-powered unmanned aerial vehicle is described. A fuel cell system featuring 1 kW proton exchange membrane fuel cell combined with a highly pressurized fuel supply system is proposed. For the higher fuel consumption efficiency and simplification of overall system, dead-end type operation is chosen and each individual system such as purge system, fuel supply system, cooling system is developed. Considering that fluctuation of exterior load makes it hard to stabilize fuel cell performance, the power management system is designed using a fuel cell and lithium-ion battery hybrid system. After integration of individual system, the performance of unmanned aerial vehicle is analyzed using data from flight and laboratory test. In the result, overall system was properly operated but for more duration of flight, research on weight lighting and improvement of fuel efficiency is needed to be progressed.

Studies on the Physiological Characteristics of (Cervus e. canadensis) Velvet Antler in Elk

  • Jeon, Byong-Tae;Thomas, David G.;Cheong, Sun-Hee;Kim, Myeong-Hwa;Kim, Sung-Jin;Sung, Si-Heung;Park, Pyo-Jam;Park, Jae-Hyun;Moon, Sang-Ho
    • Journal of Animal Science and Technology
    • /
    • v.52 no.3
    • /
    • pp.237-244
    • /
    • 2010
  • In order to investigate the physiological properties of velvet antler of elk (Cervus e. canadensis) raised in Korea, antlers (n=378) were collected from deer in 8 provinces including Gyeonggi-do (n=53), Gangwon-do (n=49), Chungcheongbuk-do (n=62), Chungcheongnam-do (n=68), Jeollabuk-do (n=52), Jeollanam-do (n=15), Gyeongsangbuk-do (n=30) and Gyeongsangnam-do (n=49). The exterior characteristics (weight, length, girth and crown) of all antlers were measured, and 18 antler samples were randomly selected for measurement of interior characteristics such as specific gravity, capacity and diameter of cross section. The mean antler weight, length of the main beam and mean length of upper section were $4.87{\pm}1.79\;kg$, $83.7{\pm}13.2\;cm$ and $40.6{\pm}11.4\;cm$, respectively. Mean girth of the top, middle and base of the main beam were $27.1{\pm}5.9\;cm$, $22.1{\pm}3.6\;cm$ and $22.9{\pm}3.6\;cm$ respectively, indicating a slight narrowing in the middle of the antler. In each of the tines, the girth at the base was markedly thicker compared to the top. The depth of the crown at the top of the antler, and the average number of crowns and tines were $14.1{\pm}7.0\;cm$, $2.1{\pm}0.6$ and $3.0{\pm}0.5$, respectively. Although there was no significant difference in mean specific gravity between top and base, mean specific gravity of main beam tended to increase from top to base of the antler with decreasing capacity. Additionally, the inner diameter of the base of the antler was significantly reduced compared to that of the top, indicating a greater integumental thickening due to mineralization. Information on the morphological and physiological properties of elk antlers is scarce. Therefore, these results may be useful in providing basic information for the physiological properties of antler, and encourage further studies on antler morphology in other deer species showing species specific differences.