• 대한건축학회논문집:계획계
• /
• 제36권4호
• /
• pp.71-81
• /
• 2020

The purpose of this study is to propose the planning methods for pollution prevention in the initial design stage by identifying the pollution phenomena on the exterior of the building. It is important to catch the problem early on because exterior troubles begin with an initial design defect and causes rapid aging. The scope of this study is seoul public borough offices that should be sustainable for long as landmark located at the center of the district. Field survey was conducted three times in six months. Twenty-six borough offices were diagnosed with three levels of contamination through visual inspection and the contaminated locations, types, materials, and characteristics were checked. Fourteen common contaminated locations were identified in the first and intensively rechecked in the second. Five locations vulnerable to contamination were designated and the contamination and cleanliness situations were checked by location in the third. As a result, main polluted types and locations are sloping wall, upper wall, protruded wall, canopy, and wall under window. The key to avoiding these pollution problems is to minimize the horizontal plane on which dust can be deposited. In other words, it can be considered variously by shape and location, such as the slope of the horizontal plane, the floating of the surface, the installation of the roof surface, and the vertical louvers. And throating plans and material plans suitable for each location are presented. Various methods of the shape and location, material are expected to use as useful basic data for preventing pollutions during the initial design stage.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.293-296
• /
• 1999

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2069-2079
• /
• 2004

This paper represents the description of a complex mathematical model of biomechanical interaction for human-rifle system during shooting. The model is developed by finite element method using bar elements. And three typical shooting positions, i.e. standing, kneeling and prone are used. Characteristics of interior/exterior ballistics and behaviors of human-rifle system are evaluated by this model, which takes into account the influence of environment, bullet, powder, barrel geometry parameters and anthropological parameters. The results of this study can be applied to anthropology, biomechanics, medical science, gait analysis, interior ballistics and exterior ballistics.

• 대한원격탐사학회지
• /
• 제33권5_3호
• /
• pp.787-798
• /
• 2017

본 연구에서는 각기 다른 방법으로 내부표정 요소를 산출하였다. 내부표정 요소를 영상처리 과정에 적용하여 총 5개의 DSM(Digital Surface Models)을 제작한 뒤 정확도를 평가하였다. 내부표정 요소를 DSM 정확도의 독립변수로 활용하기 위해 DSM의 정확도에 영향을 줄 수 있는 비행요소와 외부표정 요소를 단일 고정변수로 설정하였다. 연구결과, campaign 3-2의 RMSE가 0.0305 m로 가장 양호한 결과를 보였다. 따라서 실험실 환경에서 카메라 검정 시스템을 이용하여 내부표정 요소를 확인한 뒤, 최적화를 통해 획득한 수정된 내부표정 요소를 이용해 DSM을 제작하는 것이 가장 정확도가 높은 DSM을 구축하는 방법으로 판단된다.

• 한국광학회지
• /
• 제19권4호
• /
• pp.310-314
• /
• 2008

PDP(plasma display panel)를 비롯한 대형 디스플레이는 외부의 광이 디스플레이 내부로 입사될 경우 화질 및 명암이 저하된다. 이 문제를 해결하기 위해서 최근 관련 산업체에서는 $1\;m^2$급의 대형 투명필름 위에 수십${\sim}$수백 ${\mu}m$ 수준의 미세 패턴을 새겨서 외부 광을 차단하는 contrast 향상 필름을 개발 중이다. 이 필름이 디스플레이에 적용되려면 가장 중요한 것이 패턴의 균일도 및 이물 여부이다. 하지만 기존의 검사장비로는 $1\;m^2$급의 대형 광학 필름을 $100\;{\mu}m$ 수준의 분해능으로 짧은 시간 내에 측정할 수 없다. 본 연구에 서는 이것이 가능한 검사장비를 제안, 구축하며 실험을 통해 평가한다.

• 한국농촌건축학회논문집
• /
• 제9권2호
• /
• pp.49-56
• /
• 2007

The aim of this study is actual conditions to analyse of community center in Cheongweon-gun and propose operation method. In this study, I deduced some problems and proposed improvement planing corresponded to new needs through such as external appearance, inner space analysis, operating actual conditions analysis and etc., of existing community center in Cheongweon-gun. And I wish to present more efficient architectural space organization and operation method with these surveying results. The result of this study are as follows; Community center as representative community facilities is necessary to reflect of village characteristics on the exterior of buildings, and decision of scale and usage considered number of residents, visitors, and ages. For management of the community center, it is necessary of sustainable obtain of management cost, and provision against rebuilding and enlargement of building.

• 한국측량학회지
• /
• 제37권3호
• /
• pp.189-198
• /
• 2019

사진측량에서 단사진의 후방교회법은 이미 알고 있는 카메라의 내부표정요소, 지상좌표, 사진좌표를 이용하여 촬영당시 카메라의 위치와 자세에 해당하는 외부표정요소를 결정하는 방법이다. 본 연구에서는 코사인 법칙과 선형식기반의 3차원 좌표변환식을 이용하여 카메라의 외부표정요소를 결정할 수 있는 단사진의 공간후방교회법 알고리즘을 제안하였다. 제안한 알고리즘은 먼저 렌즈왜곡이 보정된 정규좌표를 코사인 법칙을 이용하여 지상좌표와 이에 대응되는 정규좌표간의 축척을 계산하였다. 그리고 나서 축척을 고려한 정규좌표와 지상좌표를 이용하는 선형방정식 기반의 3차원 좌표변환식을 적용하여 외부표정요소를 결정하였다. 제안한 알고리즘은 비선형방정식으로 편미분이 필요하나 지상좌표의 조합 중 가장 긴 거리를 구하여 각 지상좌표에 나누는 방법을 이용하여 초기값에 민감하지 않은 장점이 있었다. 또한, 세 점을 이용하여도 외부표정요소를 결정할 수 있기 때문에 기준점의 기하학적 배치에 안정적인 장점이 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.553-558
• /
• 2002

Physical sensor model in pushbroom satellite images can be made from sensor modeling by rotation parameters and attitude parameters on the satellite track. These parameters are determined by the information obtained from GPS, INS, or star tracker. Provided from satellite image, an auxiliary data error is connected directly with an error of rotation parameters and attitude parameters. This paper analyzed how obtaining satellite images influenced errors of rotation parameters and attitude parameters. furthermore, for detailed analysis, this paper generated simulated satellite image, which was changed variously by rotation parameters and attitude parameters of satellite sensor model. Simulated satellite image is generated by using high-resolution digital aerial image and DEM (Digital Elevation Model) data. Moreover, this paper determined correlation of rotation parameter and attitude parameters through error analysis of simulated satellite image that was generated by various rotation parameters and attitude parameters.

• 한국측량학회지
• /
• 제23권3호
• /
• pp.323-330
• /
• 2005

현재 Direct Georeferencing은 지난 10여년 적용되어오던 GPS-항측의 단점인 항공사진의 6개 외부표정요소중 단지 투영중심의 위치만 제공하던 약점을 극복하고 실무에 보편적으로 적용되고 있는 실정이다. 이의 가장 큰 장점은 지상기준점 측량작업의 절감내지는 이를 완전히 생략할 수 있다는 점이다. 본 본문은 상용의 GPS/IMU 를 이용하여 외부표정요소 결정에 대한 실힘 결과를 소개하였다. 실힘을 위하여 사진축척 1:5,000의 대축척과 1:20,000의 중축척으로 촬영한 관측자료를 처리하여 사진축척의 변화를 고려한 외부표정요소 결정의 정확도 및 결합블럭조정의 특성 등 다양하고 의미 있는 결과들을 도출하였다.