• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.9-19
• /
• 2010

Every car manufacturer desires to reduce the new car development time spent in improving the safety, NVH, lightweight, reliability and environment friendly features of the car. Other considerations such as planning, exterior and interior styling, packaging, color, and material selection increase the complexity of the car design process. This paper proposes a personal DDP (Digital Design Process) to utilize the engineering analysis and design/styling software for car design. DDP can be efficiently used by a team of car research center or a studio with small number of engineers, helping ordinary engineers becoming ambidextrous in design as well as engineering applications. The concept model starts from idea sketch, rendering, and 3D surface model with CAS (Computer Aided Styling) to the final safety estimation by using proposed DDP based on engineering technology (CAD, CAE). The concept model proposed a hydrogen fuel cell sports coupe which could be available within next 10 years. The proposed DDP can not only reduce the new car development time but also be adapted into designing of varied products such as aircraft, yacht, electrical equipment and sports gear.

• Journal of Agricultural Extension & Community Development
• /
• v.14 no.2
• /
• pp.417-436
• /
• 2007

The purpose of this study was to prepare for developing rural house remodeling techniques utilizing the traditional residence factor. The study was carried out through both literature research and on-site research. The traditional residence space factors were identified through literature research and on-site research was carried out through analysis of the rural house remodeling cases. The results of this study was as follows ; 1) Traditional space factors were derived by literature research i. e. space arrangement (topography, direction, plane arrangement), exterior factors; walls, madang, interior factors; roofs, ondol, floors, colours. 2) The traditional residence factor utilizations of remodeling were applied a result through investigation case and analysis. Five rural houses in Namsa village, Danseong-myeon, Sangcheong-gun, Gyeongsangnam-Do were analyzed as remodeling cases including traditional residence factors. There were limitation of budget problems and material selection in the traditional residence factor utilizations of remodeling. The researchers have chosen target rural houses which applied for traditional residence factors to remodel the rural houses, and the most important factor to consider was harmony with rural unique characteristics. The researchers suggested considerations should be placed on development with energy savings and convenience in rural house remodelling.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.475-478
• /
• 2008

In Korea, there has been a tendency that multi-family housings are constructed by providers such as constructors or real estate agents for the economical benefits and selling efficiency, using standardized plans, load-bearing wall system, water-based construction method, and uniformized formworks. Especially, the traditional installation works which service equipments are buried into structures cause serious problems such as shortening building life span, increasing times of remodeling during specific period (100 years) and wasting resources. Also the unilateral way of massive distribution by providers for multi-family housings is not appropriate to meet the various social needs of residents. To solve these problems, it is necessary to build long-life housing which can be easily separated installations, interior and exterior finishings from structural parts. Therefore, this paper will examine the present administrative law and the civil law in order to find negative factors that can be obstructions for providing long-life housings and set the direction to revise the regulations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1119-1122
• /
• 2003

In this paper, the electric field distribution in dielectric tube with one layer and spherical dielectric in water was simulated. The reactor was made up of the spherical dielectric that is diameter 2.5[mm], ${\epsilon}_r$ : 5, 100, 1000, 5000 respectively and one glass plate being 2[mm] thickness, ${\epsilon}_r$ : 5 as electrode. The discharge gap was 7[mm]. As a result of the simulation, in case of being about the same value between the dielectric constant of spherical dielectric and water, when the reactor was applied to high voltage dielectric polarization characteristic was trending toward disappearance. To get more strong electric field, the dielectric constant should be higher comparatively, Increasing the spherical dielectric constant, the location of equippotential line was shifting from the interior to the exterior.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1143-1146
• /
• 2003

This paper was simulated the electric field distribution in dielectric tube with two layers and spherical dielectric in water. The reactor was made up of the spherical dielectric that is diameter : 2.5[mm], ${\epsilon}_r$ : 5, 25, 100, 1000, 5000 respectively and two glass plate being 2[mm] thickness, ${\epsilon}_r$ : 5 as electrode. The discharge gap was 9[mm]. As a result of the simulation, in case of being about the same value between the dielectric constant of spherical dielectric and water, when the reactor was applied to high voltage, dielectric polarization characteristic was trending toward disappearance. To get more strong electric field, the dielectric constant should be higher comparatively, Increasing the spherical dielectric constant, the location of equippotential line was shifting from the interior to the exterior.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.421-426
• /
• 2006

To examine the behaviors of traditional wooden structural frame in Korea in direction of beam, an experimental study was performed. The interior frame of Daewoongjeon of Bongjeongsa was selected as a model, which has two short exterior columns and one high inside column. The experimental frame has 1/2 scale and lateral forces are applied at high inside column by using drift control. The vertical gravity loads are applied on the frame. From the results of experiment it was shown that the stiffness and lateral capacity of the frame was increased when vertical loads are applied and the force-drift relationship in positive load direction was not same as in negative load direction. And push-over analysis are performed by using macro model in which the rotational and shear springs which were derived from the another experiments of subassemblies were used. The numerical analysis with macro model showed a good correspondence with the experiment within 2% story drift.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.124-132
• /
• 2010

To predict and analyze the rolling stock's fire growth is considered not only important factor in estimating hazard analysis of rolling stock, but also a primary factor in aspect of a rail load facility. Because it's could be regarded as a ignition source in risk assesment for the facility i.e. tunnel and station. However, currently, standardized method to predict and analyze the fire growth has not been completed yet. it is due to the fact that fire growth is not only depended on thermal property of interior materials, but also is affected dominantly by various factors such as ignition source (characterized by location, duration, and intensity), train running condition and in/exterior ventilation condition. Especially, ventilation condition is one of the most effective factor to affect fire growth in compartment space as noticed by under-ventilation fire condition. In this study, the effect of each ventilation condition on fire growth and load were examined through the numerical method through FDS (Fire Dynamics Simulator).

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.284-292
• /
• 2009

The stack-effect in high-rise buildings in winter causes many problems such as difficulties in opening or closing doors, infiltration, energy loss, noise and fire protection. Stack effect is influenced by temperature difference between the interior and exterior of building and the height of building. As an attenuation method for stack effect, the architectural methods are generally used. However, as though architectural methods were fully adopted, the problems are reported as ever in tall building. In this study, a new method to reduce stack effect will be suggested. As an active control method against the stack effect, E/V shaft natural cooling method is suggested. In this paper, the concept of E/V shaft natural cooling system and its reduction performance of stack effect by simulation and field measurement will be reported.

• Journal of the Korean housing association
• /
• v.7 no.2
• /
• pp.139-151
• /
• 1996

The Purpose of this study is to examine residents' subjective satisfaction of the elderly housing environment and to suggest some major factors which can be used as basic design guidelines for the elderly housing. as the number of the elderly is growing in Japan For this purpose. data were collected through a questionnaire survey method, Some questions on their hope for the conditions of the elderly housing were asked to 265 old People living in the suburbs of Chiba city. Japan. Based on the findings of the statistical factor analysis, the major factors which affected on the elderly housing environment of the study can be summarized as follows ;(1)Factor1 is correlated with the space design element represented by the elderly dwelling performance and overall efficiency for the dwelling exterior space design (2)Factor2 is relative to the interior environmental element with Physiological and sensitive performance for borne services system. (3)Factor3 can be explained the moving and communication performance for Physical uneasiness of outdoor activities and request of public cultural spaces. (4)Factor4 is relative to the mental rest element with safety accidents for moving activities etc. and psychological isolation for the elderly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.44-47
• /
• 2003

In this paper, the electric field distribution in dielectric tube with one layer and spherical dielectric($ZrO_2$) in water was simulated. The reactor was made up of the spherical dielectric that is diameter : 3.0[mm], $ZrO_2(\varepsilon_r:10)$ and one glass plate of thickness(2[mm]), $\varepsilon_r$(10) as electrode. The discharge gap was 8[mm]. To get more strong electric field, the dielectric constant should be higher comparatively. Using the spherical dielectric for water discharge in dielectric tube, the location of equipotential line was shifting from the interior to the exterior. At real water discharge experimental, ozone was measured higher dissolved ozone in water at condition of water rate(l[l/min]) and injector than condition of non-injector or 2~3[l/min].