• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.83-90
• /
• 1999

This paper presents a method of seismic analysis for a cylindrical liquid storage structure on horizontally layered half-space considering the effects of the interior fluid and exterior soil medium in the frequency domain. the horizontal and rocking motions of the structures are included in this study. The fluid motion is expressed in terms of analytical velocity potential function which can be obtained by solving the boundary value problem including the sloshing behavior of the fluid as well as deformed configuration of the structure. The effect of the fluid is included in the equation of motion as the impulsive added mass and a frequency-dependent convective added mass along the nodes on the wetted boundary with structure. The soil medium is presented using the 3-D axisymmetric finite elements and dynamic infinite elements. The present method can be applied to the structures embedded in ground as well as on ground since it models the soil medium directly as well as the structure. For the purpose of vertification dynamci characteristics of a tank on homogeneous half-space is analyzed. Comparison of the present results with those by others shows good agreement.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.2
• /
• pp.79-87
• /
• 2014

Masonry-infilled walls have been used in reinforced concrete(RC) frame structures as interior and exterior partition walls. Since these walls are considered as nonstructural elements, they were only considered as additional mass. However, infill walls tend to interact with the structure's overall strength, rigidity, and energy dissipation. Infill walls have been analyzed by finite element method or transposed as equivalent strut model. The equivalent strut model is a typical method to evaluate masonry-infilled structure to avoid the burden of complex finite element model. This study compares different strut models to identify their properties and applicability with regard to the characteristics of the structure and various material models.

• International Journal of Ocean System Engineering
• /
• v.3 no.3
• /
• pp.158-163
• /
• 2013

The acoustic target strength (TS) is one of the most important parameters for a submarine's stealth design. Because modem submarines are larger than their predecessors, TS must be managed at each design stage in order to reduce it. To predict the TS of a submarine, TASTRAN R1 was developed based on a Kirchhoff approximation in a high-frequency range. This program can present TS values that include multi-bounce effect in the exterior and interior of the structure by combining geometric optics (GO) and physical optics (PO) methods, anechoic coating effect by using the reflection coefficient, and response time pattern for a detected target. In this paper, TS calculations for a submarine model with the above effects are simulated by using this developed program, and the TS results are discussed.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.203-206
• /
• 2003

Using composite materials for the carbody of tilting train has many advantages such as manufacturing variety, specific high-strength ＆ stiffness characteristics, and long-life durability, but the strongest advantage could be the possibility of lightweight product. In the leading countries, the composite materials are used for the material fur drivers'cabs, interior/exterior equipments for railway train, and it is now developing the composite materials applied for the train carbody structure. In this paper, we conducted the evaluation of structural stability for the aluminum and composite carbody of the Korean Tilting Train express(TTX) with the service speed of 180km/h.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.1
• /
• pp.29-34
• /
• 1982

We can find the characteristic impedances of the U-type transmission lines by finite d ifference method. In this paper, the characteristic impedances of the lines are computed by the moment method. There are 10% differences between the results of the finite difference method and those of the moment method. But when the interior conductor of the line is located at the center of the exterior conductor, the results of the moment method approache to that of analytical result when the length of outer conductor becomes in finite.

• Korean Management Science Review
• /
• v.13 no.3
• /
• pp.75-90
• /
• 1996

This paper presents an improved method of the Analytic Hierarchy Process (AHP) when customers are to select the best automobile purchase models. In order to support group decisions and as a different procedure of the conventional AHP, we combine the AHP model with a spreadsheet model that applies the Likert's rating scheme to each alternative. We only consider individual pairwise comparison matrices where the consistency ratio (C.R.) is less than or equal to 0.2. Finally, we regard the weight of each decision maker as a reciprocal number of C.R. As a case study we prioritize three passenger cars of medium size in the domestic market. The major evaluation criteria include:exterior or interior features, performance, safety, pricing, salesman, and after service.

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.87-94
• /
• 2006

The purpose of this study was to evaluate the relationships between the mixing ratio and water vapor sorption property of charcoal-based loess composites for furniture & building materials with environmental friendly. Charcoal-based loess composite can be easily made by blending method with water. But the composites had much brittle fracture pattern with the increase of charcoal content. That is due to the lack of loess that takes linkage role of composites. In water vapor sorption properties, adsorption ability of charcoal was about six times higher than that of loess. Therefore, vapor sorption ability was maximum at the mixture ratio of charcoal 80% and loess 20%. It is considered that wood charcoal based inorganic composite materials can be used for various purposes as a building interior & exterior and furniture members.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.173-177
• /
• 2006

A noise transfer function(NTF) is the frequency response function between an input force applied to an exterior point of a vehicle body and the resultant interior sound pressure usually measured at the driver's ear position. It represents the measure of noise sensitivity for the output force transmitted to the joints between the body and chassis. The principle of vibro-acoustic reciprocity is often utilized in the measurement of NTF. One difficulty in using the volume source is that most of the previously proposed methods require the knowledge of the volume velocity of the acoustic source in advance. A new method proposed in the present work does not require any calculation related with the volume velocity of the acoustic source, but still yields even more accurate results both in the amplitude and phase of the NTF. In the present work, the new method is applied to obtain NTF data for a midsize sedan.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1097-1102
• /
• 2005

Non-Destructive Testing (NDT) is test method which finds the mechanical or natural or artificial defects of the interior or exterior of those without destructing materials and welded products. NDT is a means to assess the perfection of a component or system perfection. NOT images defects using scattered light, sound, electric current, magnetic fields and X-ray. Each NDT method has merits and demerits in the detecting ability of defects according to evaluated subjects. Defects can affect the serviceability of the material or structure, so NDT is important in guaranteeing safe operation as well as in quality control. In this review, we considered the methods of NDT applied to current railway vehicle manufacturing.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.98-102
• /
• 2003

The use of composite materials for the carbody structures of tilting train has many advantages because of manufacturing variety, specific high-strength & stiffness characteristics, and long-life durability, but the strongest advantage is the possibility of lightweight product. In the leading countries, the composite materials are used for the material for drivers' cabs, interior/exterior equipments for railway train, and it is now developing the composite materials applied for the train carbody structure. In this paper, we conducted the evaluation of structural stability for the all aluminum carbody, all composite carbody and hybrid carbody structures of the Korean Tilting Train eXpress(TTX) with the service speed of 180km/h.