• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.317-322
• /
• 2004

This paper deals with a prediction method of tool life in view of the reliability assessment. In this study, the flank wear was studied among multi-factors deciding the tool wear state. Firstly, tool lift was predicted by correlation between flank wear and cutting time, based on the extended Taylor tool life equation of turning data, including parameters of cutting speed, feed rate, and cutting depth. Secondly, each of cutting conditions of endmilling was equivalently converted to apply ball endmill data to the extended Taylor equation. The web-based reliability prediction program for tool lift is being developed as one of reliability assessment programs to for the machine tools.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.1-7
• /
• 2005

The prediction for tool life is one of the most important factors for increasing reliability, stability, and productivity of manufacturing system. This paper deals with a tool life prediction method in view of reliability assessment for cutting tools. In this study, flank wear was focused among multi-factors deciding the tool wear state. First, tool life was predicted by correlation between flank wear and cutting time, based on the extended Taylor tool life equation of turning, including parameters of cutting speed, feed rate, and cutting depth. Second, each of cutting conditions of end-milling was equivalently converted to apply ball end-mill data to the extended Taylor equation. The web-based prediction program for tool life was developed as one of reliability assessment programs for machine tools.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.401-407
• /
• 2009

Commercial grades of solution styrene-butadiene rubbers extended with high aromatic oils having high polycyclic aromatic compounds (PCA) and low PCA oils were used to study the effect of the processing oil particularly on the crack propagation resistance and frictional wear resistance of the vulcanizates. The aromatic oil based vulcanizates exhibited superior fracture behavior over the low PCA oil extended vulcanizates based on tensile and trouser tear tests. Compounds with aromatic oil showed superior crack propagation resistance compared with those containing low PCA oil, especially at the lower ranges of tearing energy. In terms of frictional wear resistance, the aromatic oil extended compounds showed superior performance particularly in the lower frictional work ($W_f$) range but in the higher $W_f$ range the low PCA oil extended vulcanizates performed better.

• The International Journal of Costume Culture
• /
• v.7 no.2
• /
• pp.135-150
• /
• 2004

The purpose of this study is to explicate the contemporary concept of the term 'sportswear' by studying the history of sportswear tradition in America where sportswear was first established and developed. American sportswear originated from some functional clothes made for specific sports during the 19th century. Early in 20th century, there occurred many significant events in America while Americans were undergoing two successive world wars. First of all, due to the wars, women's role in labor force became so significant that their social status was enhanced remarkably. With economy growing every decade, the amount of leisure time for American people substantially increased and, therefore they could develop their leisure activity culture. All these changes made Americans demand the need for comfortable and functional clothes suitable for their changed way of life. In response to this demand, the sportswear tradition became mature due to the contribution by many creative All-American designers, most of whom have made their active contributions since 1970s. Now the sportswear, which used to be designed for specific sports, developed into casual wear in general with its extended definition. The contemporary concept of sportswear is no longer limited to those clothes for specific sports. Sportswear has now become more like a casual activity wear which all classes of people can enjoy in their life. Since the concept and scope of sportswear is extended to a great degree today, we need a new professional term to correctly express the extended nature of these contemporary clothes.

• Journal of Fashion Business
• /
• v.11 no.3
• /
• pp.133-151
• /
• 2007

The role of fabric now directly related with the expression of the beauty of clothing and it provides new and creative ideas. This study was aimed at reviewing basic data that can be used in systematic design development through fabric expression for today's fashion designers who must study unique, original fashion design development. For systematic development of design technique through fabric expression, fabric expression methods and characteristics, aesthetic characteristics and fabric design of 'art to wear' were reviewed and the results are as follows. First, the highly wrought fabric expression of art to wear was confirmed to be comprehending a message within itself. Second, aesthetic characteristics of fabric expression used in art to wear can be classified as decorativeness, extensity, 2-D pictorialness, handicraft, compounding and rearrangement, and 3-D characteristics. Third, the 6 aesthetic characteristics have unique design features and aesthetic categories. The understanding the fabric expression techniques through study on the classification of the fabric expression in 'art to wear' is expected to be extended to proposition of creative direction and inspiration of modern fashion.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.34-41
• /
• 1993

SUS304 is wellknown as difficult-to-machine materials. It is easy to appear workhardened, and workhardening is one of the causes of groove wear on the tool. In this paper, the author would like to compare the width of flank wear with that of groove wear, and to find whether the groove wear can be used as a criterion of a tool life. The design of the twelve tests provides three levels for each variable (speed: 200m/min, 118m/min, 70m/min; feed: 0.3mm/rev, 0.17mm/rev, 0.1mm/rev; depth of cut: 0.4mm, 0.28mm, 0.2mm). The study of tool-life testing by statistical technique follows usual most scientific sequence. So the tool-life predicting equation is calculated by the method of least squares. The overall adequacy of the model can be verified by the analysis of variance. The results obtained are as follows : 1) When SUS304 is cut in 200(m/min), the width of flank wear is much larger than that of groove wear. 2) In cutting speed 118m/min, flank wear is a little larger than groove wear and in the cutting speed 70m/min, the latter is a little larger so that it is reasonable to determine the tool life according the crierion by groove wear in the low cutting speed (less than 70m/min). 3) Owing to the burr the depth of engagement along the cutting edge is extended toward the shank.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.1
• /
• pp.15-20
• /
• 2007

Conditioner wear, copper polish rates, pad temperature and coefficient of friction (COF) are measured for two novel Mitsubishi Materials Corporation designs during an extended wear and polishing test. Both designs are coated with a $Teflon^{TM}$ film to reduce substrate wear and chemical attack. Using optical interferometry, changes in the coating that result in gradual changes in diamond exposure are measured. Theories of the COF, conditioning, and polishing are applied to explain the observed performance differences between the designs.

• Journal of Fashion Business
• /
• v.19 no.2
• /
• pp.69-84
• /
• 2015

The objective of this study is to investigate the intention to adopt smart wear, based on extended UTAUT model. We examined the effects of performance expectancy (PE), effort expectancy (EE), hedonic motivation (HE), social influence (SI), facilitating conditions (FC), and price value (PV) on the intended adoption of smart watch and smart shoes, respectively. In addition, moderating effects of gender, age, and innovation resistance were examined. An online survey was conducted, comprised of 2030 consumers who were aware of smart watch or smart shoes. In total, 393 responses were analyzed. About 50.4% were male, and 44.8% were in their 20's. An exploratory factor analysis generated five factors - PE & HM, EE, SI, FC, and PV- which were employed as independent variables in the multiple regression models. PE & HM, PV, and SI influenced on the intention to use both smart devices. FC showed the significant effect only on the intention to adopt the smart watch. In terms of gender differences, SI and PV were the important predictors of the intention to adopt the smart watch in the female group only. With respect to age difference, SI was very effective in explaining the intention of individuals in their 30's to adopt smart wear. Among the low innovation resistance group, SI was significant predictor, while PE & HE and PV were significant among the high resistance group. The findings provide useful information about the possibility of the adoption of smart wear, and new insight into market segmentation.

• Journal of Welding and Joining
• /
• v.22 no.4
• /
• pp.35-42
• /
• 2004

Contact tips are required to have a higher resistance to wear and thus to have an extended life time under the advanced GMAW welding process. Several requirements have been specified and employed by domestic industries for selecting their tips for such a purpose. However no attempt has been made to justify their requirements based on the experimental data of wear resistance or life time of contact tips. In this study, five different contact tips with three different compositions were employed for actual GMA welding up to 4 hours and were evaluated their wear resistance by measuring in every one hour the area of enlarged hole at the exit side. Experimental results clearly showed that the Cr-containing tips strengthened by precipitation hardening have much better resistance to wear than those made by work hardening. It was further noticed that Cr is an excellent alloying element for improving the wear resistance of contact tips only when it is in an properly aged condition. Initial hardness may play some role in the early stage of wear but not in the later stage of welding because the microstructure of tip changes significantly by the prolonged exposure to welding arc heat. Based on these results, critical review has been made on the current requirements employed by domestic industries. Of importance is that a new guideline has been confirmed to be more reasonable.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.19-28
• /
• 2020

The spacer, which is located between the bucket and the arm of an excavator, has a role in preventing damage to the excavator arm during excavation work. When the durability of the spacer is increased, the lifetime of the arm can be extended and the processing costs can be reduced. To increase the durability of the spacer, tungsten carbide (WC) coating was applied on the surface of a spacer using the plasma transferred arc (PTA) process. The confirm the durability, a wear test using a pin-on disk type of wear testing machine was done under the given conditions and the wear amount on the surface of a tested specimen was measured using reflective digital holography. The results were compared with that of ALPHA-STEP.