• Food Science of Animal Resources
• /
• v.33 no.2
• /
• pp.221-228
• /
• 2013

This study was performed to evaluate the effects of various levels of mungbean flour (MF) (0-2.4%) on the quality characteristics of pork model sausages (PMS) in experiment 1 and also select the optimum level of MF to enhance the water retention and gelling properties of low-salt PMS (LSPMS) with or without microbial transglutaminase (MTGase) in experiment 2. In experiment 1, the addition of MF did not affect pH, chemical compositions (fat and moisture contents), color values, and functional properties (expressible moisture, EM (%) and cooking yield, CY (%)) of PMS. However, the addition of MF increased the chewiness of PMS and hardness if the mungbean flour at the level of more than 1.2% was incorporated. Since the interaction between the microbial transglutaminase (MTGase) treatment and MF level was not significant (p>0.05), data were pooled by different factors (MTGase treatment and MF level) in experiment 2. MF improved the water binding ability and textural springiness of LSPMS. On the other hand, MTGase treatment decreased the pH and cooking yield (%) of LSPMS, but increased most textural properties. In conclusion, the addition of MF could enhance the water retention and textural properties of PMS and LSPMS, regardless of MTGase, when it was added to over 1.2%. Based on these results, mungbean protein may interact with MTGase on the low-salt comminuted meat systems. Therefore, further study might be needed to understand the mechanisms of interaction between MTGase and functional components induced from MF.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.577-582
• /
• 2002

Effects of the addition of single or blends of konjac flour (KF), carrageenan (CN), and soy protein isolate (SPI) into the sausage formulation were determined based on the physico-chemical and textural characteristics of low-fat comminuted sausage (LFS, fat <3%). LFSs had a pH range of 6.10 to 6.16, 77-79% moisture, <3% fat, and 13-15% protein contents, whereas regular-fat sausages (RFSs) had a pH value of 6.11, 62.5% moisture, 19.4% fat, and 11.9% protein. LFSs containing fat replacers were reduced (P<0.05) cooking loss (CL, %). KF alone or mixed with other hydrocolloids slightly improved the water-holding capacity, whereas CN increased (P<0.05) the gel strength, resulting in higher hardness values. Replacement of 6% lean meat with 1.5% SPI alone increased (P<0.05) yellowness (Hunter b value) and expressible moisture (EM, %). TPA values of KF+CN+SPI were the most similar to those of RFSs. These results indicated that triple addition of KF, CN and SPI at the ratio of 1 : 1 : 3 in LFS formulation improved functional properties, as compared to the low-fat control, and had textural characteristics most similar to those with RFSs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.858-864
• /
• 2001

This study was performed to investigate the effect of sodium lactate (SL, 60%) and a mixed fat replacer (FR) on the product quality and shelf-life effect of low-fat bologna sausage (LFBS) in a model system during refrigerated storage. Low-fat and regular-fat bologna sausages had pH values ranged from 6.15 to 6.30 and water activity values ranged from 0.95 to 0.96. LFBS had a moisture content of 74~76%, <2% fat and 14~15% protein, whereas regular-fat bologna had 60% moisture, 22% fat and approximately 12% protein in the final products. Expressible moisture (%) increased (p<0.05) in all bolognas, resulting in the soft texture, as the storage time (weeks) increased. LFBS manufactured with SL and a FR had lower (p<0.05) the cooking loss (%) and had higher (p<0.05) texture profile analysis (TPA) values than the regular-fat counterpart. As the sodium lactate level increased up to 5% in the formulation of LFBS, vacuum purge and TPA hardness values also increased (p<0.05), but thiobarbituric acid (TBA) values decreased (p<0.05). Total plate counts of LFBS were reduced (p<0.05) when the addition level of 60% SL solution was more than 3.3%. This result indicated that the increased level of SL (>3.3%) in the combination of a FR in the formulation of LFBS improved the product quality and did inhibit the total microbial growth of LFBS during storage, as compared to the control.

• Food Science of Animal Resources
• /
• v.35 no.6
• /
• pp.824-830
• /
• 2015

This study was performed to investigate the effect of dietary processed sulfur supplementation on water-holding capacity, color, and lipid profiles of pork according to the level of dietary processed sulfur (0%, CON; 0.3%, S). The pigs were slaughtered at an average final weight of 120 kg, and the longissimus dorsi muscles were collected from the carcasses. As results, pork processed with sulfur had significantly higher moisture and ash contents compared to those of CON but lower crude fat, pH, expressible drip, lower redness and yellowness, and greater lightness. Pork processed with sulfur showed significantly lower total lipid content, triglycerides, and atherosclerosis index but significantly higher high-density lipoprotein cholesterol. Feeding processed sulfur significantly lowered myristic acid, heptadecanoic acid, and stearic acid contents, whereas monounsaturated fatty acids and oleic acids were significantly higher compared to those in the CON. Higher amounts of polyunsaturated fatty acids and n-6 fatty acids were observed in the pork processed with sulfur than that of the CON. Therefore, supplementing pigs with dietary sulfur improved nutrient and meat quality.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.563-574
• /
• 2006

This study was performed to investigate if high molecular weight(～200kDa) of chitosan can be a potential possibility to replace with the sodium nitrite in low-fat sausages. pH, proximate analysis, Hunter color values, vacuum purge, expressible moisture(EM, %), texture profile analysis(TPA), shelf-life effect were measured. No differences in physico-chemical properties were observed between controls and chitosan treatments(p>0.05). Since Hunter-a-values(redness) were reduced with the addition of chitosan as compared to the sausages containing sodium nitrite and sodium lactate, it could not be replaced by chitosan completely. However, total plate counts(TPC), thiobarbituric acid reactive substance(TBARS), volatile basis nitrogen(VBN) did not differ between chitosan treatments and controls. These results indicated that the addition of chitosan into meat products would be replaced with sodium nitrite partially, but it may not be completely replaced due to the reduced Hunter-a-values. Further research will be continuously performed to screen the natural ingredients which might have a cured pigment in meat products.

• Food Science of Animal Resources
• /
• v.35 no.3
• /
• pp.330-338
• /
• 2015

The effects of dietary supplementation of processed sulfur in pigs according to the level provided during the fattening phase were examined. The pigs were divided into three groups: control (CON), non-sulfur fed pigs; T1, 0.1% processed sulfur fed pigs; T2, 0.3% processed sulfur fed pigs. Physicochemical and sensory properties, as well as meat quality and oxidative stability of the Longissimus dorsi muscle were investigated. The feeding of processed sulfur did not affect moisture and protein contents (p>0.05). However, the crude fat content of T2 was significantly decreased compared to CON (p<0.05), while the pH value of T2 was significantly higher than those of both CON and T1 (p<0.05). Cooking loss and expressible drip of T2 were also significantly lower than that of CON (p<0.05). The redness of meat from T1 was significantly higher than both CON and T2 (p<0.01). During storage, lipid oxidation of the meat from sulfur fed pigs (T1 and T2) was inhibited compared to CON. Examination of omega-3 polyunsaturated fatty acids revealed T2 to have significantly higher content than CON (p<0.05). In the sensory test, the juiciness and overall acceptability of T2 recorded higher scores than CON. This study demonstrated that meat from 0.3% processed sulfur fed pigs had improved nutrition and quality, with extended shelf-life.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.421-428
• /
• 2011

Low-fat sausages with or without 10% hydrated rice flour were made from duck, chicken and pork and their physical and sensory properties were compared. Results showed that moisture content did not differ significantly among the sausage batters. However, crude protein, crude fat and total ash content were significantly lower in the group with added rice flour compared with the no flour group. Crude protein and crude fat were the highest in pork sausages without rice flour (p<0.05). Adding 10% rice flour reduced total expressible fluid in all meat type sausages. Cooking loss was also decreased when 10% rice flour was used in making sausages from chicken and pork. However, no changes in cooking loss were found in duck meat by adding rice flour. Again, the highest cooking loss was in pork sausages without rice flour and lowest in chicken sausages with 10% rice flour. The pH of the meat from different animal species differs significantly, although no significant difference was found within meat types with or without rice flour. Lightness ($L^*$) increased, while redness ($a^*$) decreased with adding rice flour in all meat type sausages. Results showed that hardness was significantly reduced when 10% rice flour was added to pork, chicken and duck meat (p<0.05). This may be due to increased water retention of rice flour after cooking. Sensory evaluation indicated that the overall acceptability of pork and chicken sausages with or without rice flour was the same, but duck sausages without rice flour had the highest off-flavor score among the sausages. Addition of rice flour increased the overall acceptability of duck sausage to that of pork and chicken sausages.

• Animal Bioscience
• /
• v.35 no.8
• /
• pp.1270-1278
• /
• 2022

Objective: The objective of this study was to evaluate quality characteristics of reduced-salt pork sausage (PS) using pre-rigor muscle compared to those of regular-salt PS. In addition, effects of freezing on sausage batter with different temperatures (-30℃ vs -70℃) on quality characteristics of both sausage batter and cooked sausages during frozen storage were observed. Methods: Pre-rigor and post-rigor pork hams were used to manufacture low-fat sausages. Sausages using post-rigor (Post) muscle were manufactured at a salt level of 1.5%, whereas those with pre-rigor (Pre) muscle were processed at salt level of 1.0%. After these muscles were made at two salt levels (1.5% salt, Post-rigor; 1.0% salt, Pre-rigor), Sausage batters were stored at two frozen temperatures (-30℃ vs -70℃). During storage for 12 wks, they were measured for physicochemical and textural properties every 4 wks up to 12 wks. Results: pH values and temperatures of sausage batter of pre-rigor muscle were higher than those of post-rigor muscle regardless of the frozen temperature. The lightness and yellowness values of batter at the initial storage were the highest during storage. For PS, there were no differences in most parameters measured among all treatments. However, expressible moisture values (%) of Pre-30 and Pre-70 were lower than those of Post-30 (p<0.05). Conclusion: Regardless of frozen temperature during storage, quality characteristics of pre-rigor PS with salt level of 1.0% salt were similar to those of post-rigor PS with salt level of 1.5%. By using the pre-rigor muscle, salt content could be reduced by one third of the regular-salt level (1.5%) of post-rigor muscle.

• Animal Bioscience
• /
• v.36 no.9
• /
• pp.1445-1452
• /
• 2023

Objective: This study was performed to evaluate the quality characteristics of pork sausage (PS) with sea tangle extract (STE) and rapid chilled pre-rigor muscle (RCPM) for the development of reduced-salt low-fat sausage. Methods: Pre- and post-rigor pork ham muscles were prepared to process PSs. Positive control (reference, REF) using post-rigor muscle were manufactured at a regular-salt level of 1.5%. Fresh and rapid-chilled pre-rigor muscle (FPM and RCPM) were used to manufacture reduced-salt sausages with 0.8% salt. Reduced-salt PSs were prepared with four treatments: FT1 (FPM alone), FT2 (FPM with 5% STE), RT1 (RCPM alone), and RT2 (RCPM with 5% STE). The physicochemical and textural properties of the sausages with reduced-salt levels and RCPM combination were measured to determine if the characteristics of RCPM were similar to those with FPM. Results: The pH values of PS with FPM and RCPM were higher than those of REF with post-rigor muscle. Color values (L^*, a^*, b^*) were not affected by different rigor-states and salt addition level. Textural properties of reduced-salt PSs were similar to those of REF due to the improved functionalities of pre-rigor muscle. RT2 had lower expressible moisture (%) than other treatments with post-rigor muscle and RCPM except for RT1. Conclusion: The addition of STE and RCPM to reduced-salt PS increased the water-holding capacity, which was lower than those of PS with STE using RCPM but similar to those of regular-salt sausage.

• Food Science of Animal Resources
• /
• v.44 no.3
• /
• pp.586-606
• /
• 2024

The study was performed to determine the effect of faba bean protein isolate (FBPI) alone or in combination with microbial transglutaminase (MTG) on the rheological properties of pork myofibrillar protein gel (MPG), and physiochemical and textural properties of reduced-salt, low-fat pork model sausages (LFMSs). The cooking yields of MPGs with MTG or FBPI alone decreased and increased, respectively. However, the combination of FBPI and MTG was similar to the control (CTL) without FBPI or MTG. Gel strength values of MPG added with both FBPI and MTG were higher than treatments with FBPI or MTG alone. The hydrophobicity values of CTL were lower than those of MPG with FBPI alone, whereas the addition of MTG decreased the hydrophobicity of MPGs. The incorporation of FBPI alone or in combination with MTG decreased sulfhydryl groups (p<0.05). Shear stress values of MPGs with MTG tended to be higher than those of non-MTG treatments at all shear rates, and the addition of FBPI into MPGs increased shear stress values. Reduced-salt (1.0%) LFMSs with FBPI alone or combined with MTG had both lower cooking loss and expressible moisture values than those of CTL and similar values to the reference sample (REF, 1.5% salt). Textural properties of reduced-salt LFMSs with FBPI or MTG were similar to those of REF. These results demonstrated that the combination of FBPI and MTG could improve the water binding capacity and textural properties of pork MPGs and LFMSs and might be suitable for application in the development of healthier meat products.