• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1461-1471
• /
• 2021

This paper presents a light exposure correction algorithm for less pleasant images, acquired with a light metering failure. Since conventional tone mapping and gamma correction methods adopt a function mapping with the same range of input and output, the results are pleasurable for almost symmetric distributions to their intensity average. However, their corrections gave insufficient outputs for asymmetric cases at either bright or dark regions. Also, histogram modification approaches show good results on varied pattern images, but these generate unintentional noises at flat regions because of the compulsive shift of the intensity distribution. Therefore, in order to sufficient corrections for both bright and dark areas, the proposed algorithm calculates the gamma coefficients using primary parameters extracted from the global distribution. And the fusion weights are adaptively determined with complementary parameters, considering the classification information of a binary segmentation. As the result, the proposed algorithm can obtain a good output about both the symmetric and the asymmetric distribution images even with severe exposure values.

• 한국멀티미디어학회논문지
• /
• 제24권8호
• /
• pp.1059-1067
• /
• 2021

In this paper, a HDR algorithm for a single image is proposed using the exposure fusion, that adaptively calculates gamma correction coefficients according to the image distribution. Since typical HDR methods should use at least three images with different exposure values at the same scene, the main problem was that they could not be applied at the single shot image. Thus, HDR enhancements based on a single image using tone mapping and histogram modifications were recently presented, but these created some location-specific noises due to improper corrections. Therefore, the proposed algorithm calculates proper gamma coefficients according to the distribution of the input image and generates different exposure images which are corrected by the dark and the bright region stretching. A HDR image reproduction controlling exposure fusion weights among the gamma corrected and the original pixels is presented. As the result, the proposed algorithm can reduce certain noises at both the flat and the edge areas and obtain subjectively superior image quality to that of conventional methods.

• 만화애니메이션 연구
• /
• 통권33호
• /
• pp.425-447
• /
• 2013

디지털 카메라의 대중화로 인하여 ISP(Image Signal Process)에 관한 연구들이 활발히 일어나고 있으며 이와 함께 사용자들이 쉽게 사용할 수 있는 이미지 보정 어플리케이션들도 많이 개발되고 있다. 특히 AWB(Automatic White Balance) 와 Auto Exposure 는 ISP 기능 중에서도 가장 관심을 받는 분야로서 이미지나 영상의 질을 높이는데 많은 기여를 하고 있다. 3D 프로그램에서 라이팅과 카메라의 원리는 실제 카메라와 라이팅의 원리를 적용하여 만들어졌으나, 실제의 카메라에서 사용되고 있는 자동노출 기능과 AWB 기능들과 같은 전문적인 기능들은 3D 프로그램 상에서 구현되지 못하고 있다. 영상에서 색상의 보정은 색상에 대한 전문적인 지식이 있어야 가능하며, 합성프로그램에서 제공하는 기능들은 일반적인 디지털 사진을 보정하는 프로그램 방식에 비하여 복잡한 것이 사실이다. 특히 애니메이션을 공부하는 대학생들의 경우에는 애니메이션의 제작과정에 있어서 색상보정의 과정을 생략하고 렌더링과 합성과정을 거쳐서 애니메이션을 완성하고 있다. 따라서 본 연구는 색상보정에 사용하는 기능들을 3D 애니메이션제작 실사에서 적용 가능하게 함으로서 색상에 대한 전문적인 지식이 없는 사람이라도 쉽게 색상을 보정하여 렌더 이미지의 퀼리티를 높이는 3D 제작 파이프라인을 본 연구를 통하여 제시하고자 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.81-88
• /
• 2007

환경노출로부터 야기되는 콘크리트 열화 중에서, 도심지 및 지하구조물의 탄산화에 대한 문제가 증가되고 있다. 그러나 현재 국내 콘크리트 구조물의 탄산화 예측에 사용되는 예측식은 국내 콘크리트 구조물의 노출환경을 고려하지 않고 기존 외국의 문헌에 수록되어 있는 예측식을 직접적으로 사용하여 오차를 수반하게 된다. 본 연구의 목적은 국내에서 시공되는 콘크리트 구조물의 노출환경에 따라 탄산화 깊이를 예측할 수 탄산화 예측식을 제안하는데 있다. 이를 위해, 기존 탄산화 예측식을 분석하였으며, 국내에서 광범위하게 시공된 콘크리트 구조물에 대한 실태조사자료를 이용하여 콘크리트 구조물의 노출환경을 고려한 보정계수를 도출하였다. 최종적으로 보정계수를 강도의 함수로 구현하여 국내의 대표적인 콘크리트 구조물의 노출환경에 따른 탄산화 예측식을 제안하였다.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.51-58
• /
• 2010

Ionization chambers often exhibit a stem effect, caused by interactions of radiation with air near the chamber end, or with dielectric in the chamber stem or cable. In this study measured stem effect correction factor for length of ionization chamber from medical linear accelerator recommend to with the use of stem correction method. For a model of the Farmer-type chamber, were used to calculate the beam quality correction factor. These interactions contribute to the apparent measured exposure. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field. Linear accelerator generated photons energy and increased dose repeatedly measured by using stem correction method. Stem effect was dependence of the energy and increases with photon energy conditions improved of beam quality. In conclusion, stem effect correction factor was measured within 0.4% calculated according to the exposures stem length and also supposed to determined below 1% of another stem correction method.

• 대한방사선기술학회지:방사선기술과학
• /
• 제7권1호
• /
• pp.67-70
• /
• 1984

Radiographic units have changeable factors in x-ray outputs, Therefore, an exposure factor by basic experimental study must be made out about each x-ray installation, but this is very intricate methods and not a practical business. Authors tried out a new method to make simple exposure factors. The first, we had a experimental object radiograph taken to find the output of each radiographic unit. The second, by obtained x-ray density we found the difference in x-ray output. and lastly, we made a new and simple correction method to use the obtained output and x-ray density.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1225-1233
• /
• 2024

Level 3 probabilistic safety assessment (PSA) is performed to calculate radionuclide concentrations and exposure dose resulting from nuclear power plant accidents. To calculate the external exposure dose from the released radioactive materials, the radionuclide concentrations are multiplied by two factors of dose coefficient and a finite cloud dose correction factor (FCDCF), and the obtained values are summed. This indicates that a standard set of FCDCFs is required for external exposure dose calculations. To calculate a standard set of FCDCFs, the effective distance from the release point to the receptor along the wind direction should be predetermined. The TID-24190 document published in 1968 provides equations to calculate FCDCFs and the resultant standard set of FCDCFs. However, it does not provide any explanation on the effective distance required to calculate the standard set of FCDCFs. In 2021, Sandia National Laboratories (SNLs) proposed a method to predetermine finite effective distances depending on the atmospheric stability classes A to F, which results in six standard sets of FCDCFs. Meanwhile, independently of the SNLs, the authors of this paper discovered that an infinite effective distance assumption is a very reasonable approach to calculate one standard set of FCDCFs, and they implemented it into the multi-unit radiological consequence calculator (MURCC) code, which is a post-processor of the level 3 PSA codes. This paper calculates and compares short- and long-range FCDCFs calculated using the TID-24190, SNLs method, and MURCC method, and explains the strength of the MURCC method over the SNLs method. Although six standard sets of FCDCFs are required by the SNLs method, one standard sets of FCDCFs are sufficient by the MURCC method. Additionally, the use of the MURCC method and its resultant FCDCFs for level 3 PSA was strongly recommended.

• 제어로봇시스템학회논문지
• /
• 제13권8호
• /
• pp.798-803
• /
• 2007

In case of minimized digital camera and mobile digital camera, it's difficult to get the high quality image by conventional AE(Auto Exposure) algorithm because of restriction of system organization. In this paper, a new algorithm that adopts a target setting, a compensation of feedback delay and a gamma correction, etc, are suggested for improving a noise increase and an output sensitivity decrease due to system minimization. We also suggest a method using fuzzy logic which can decide more effectively the ES(Electric Shutter) value and the AGC(Analog Gain Control) value than conventional system.

• Journal of Radiation Protection and Research
• /
• 제16권2호
• /
• pp.7-16
• /
• 1991

감마선 조사선량의 국가표준을 확립하기 위하여 Co-60 감마선에 대한 조사선량률 절대 측정을 수행하였고 그 값이 갖는 오차한계를 분석 평가하였다. 측정기로는 고순도 흑연으로 제작된 원통형 이온전리함을 사용하였고 이온화 전류 측정은 vibrating reed 증폭기를 사용한 전하모드법에 의해 수행되었으며 관련 물리상수 및 각종 관련 보정인자를 평가하여 이온화 전류 측정값으로부터 조사선량률을 결정하였다.

• 한국환경과학회지
• /
• 제25권8호
• /
• pp.1107-1114
• /
• 2016

This research, sponsored by the Korean Ministry of Environment in 2014, was the first epidemiological study in Korea that investigated the health impact assessment of radon exposure. Its purpose was to construct a model that calculated the annual mean cumulative radon exposure concentrations, so that reliable conclusions could be drawn from environment-control group research. Radon causes chronic lung cancer. Therefore, the long-term measurement of radon exposure concentration, over one year, is needed in order to develop a health impact assessment for radon. Hence, based on the seasonal correction model suggested by Pinel et al.(1995), a predictive model of annual mean radon concentration was developed using the year-long seasonal measurement data from the National Institute of Environmental Research, the Korea Institute of Nuclear Safety, the Hanyang University Outdoor Radon Concentration Observatory, and the results from a 3-month (one season) survey, which is the official test method for radon measurement designated by the Korean Ministry of Environment. In addition, a model for evaluating the effective annual dose for radon was developed, using dosimetric methods. The model took into account the predictive model for annual mean radon concentrations and the activity characteristics of the residents.