• 제목/요약/키워드: exponential analysis

검색결과 983건 처리시간 0.027초

일메나이트 중 철의 선택적 염화와 선광된 TiO2의 추가 염화반응에 대한 글로벌 피팅함수 (Global Fitting Functions for Kinetics of Fe-Selective Chlorination in Ilmenite and Successive Chlorination of Beneficiated TiO2)

  • 정동규;원용선;김용하;정은진;송덕용
    • 한국재료학회지
    • /
    • 제29권7호
    • /
    • pp.412-424
    • /
    • 2019
  • Global fitting functions for Fe-selective chlorination in ilmenite($FeTiO_2$) and successive chlorination of beneficiated $TiO_2$ are proposed and validated based on a comparison with experimental data collected from the literature. The Fe-selective chlorination reaction is expressed by the unreacted shrinking core model, which covers the diffusion-controlling step of chlorinated Fe gas that escapes through porous materials of beneficiated $TiO_2$ formed by Fe-selective chlorination, and the chemical reaction-controlling step of the surface reaction of unreacted solid ilmenite. The fitting function is applied for both chemical controlling steps of the unreacted shrinking core model. The validation shows that our fitting function is quite effective to fit with experimental data by minimum and maximum values of determination coefficients of $R^2$ as low as 0.9698 and 0.9988, respectively, for operating parameters such as temperature, $Cl_2$ pressure, carbon ratio and particle size that change comprehensively. The global fitting functions proposed in this study are expressed simply as exponential functions of chlorination rate(X) vs. time(t), and each of them are validated by a single equation for various reaction conditions. There is therefore a certain practical merit for the optimal process design and performance analysis for field engineers of chlorination reactions of ilmenite and $TiO_2$.

성능위주설계를 위한 가연물의 열발생률 및 화재성장률 측정 - 판매시설의 플라스틱 화재를 중심으로 - (Measurements of the Heat Release Rate and Fire Growth Rate of Combustibles for the Performance-Based Design - Focusing on the Plastic Fire of Commercial Building)

  • 장효연;남동군
    • 한국화재소방학회논문지
    • /
    • 제32권6호
    • /
    • pp.55-62
    • /
    • 2018
  • 국내 성능위주소방설계(PBD)에 신뢰성이 향상된 예측결과를 기여하고자 판매시설 가연물 중 플라스틱으로만 이루어진 제품을 대상으로 실규모 화재실험이 수행되었다. 이때 판매시설의 경우 다양한 가연성 물질이 진열된 판매대의 간섭 또는 상품 적재 등으로 인한 화재확산의 검토를 위하여 단일 및 다수가연물로 분리되어 실험조건이 선정되었다. 이에 따라 최대 열 발생률에 따른 가연물의 노출 면적 및 중량은 대략 93%와 89%의 매우 선형적인 관계를 확인할 수 있다. 또한 다양한 가연물에 대한 가스농도의 분석 결과 이산화탄소($CO_2$)는 최대 열 발생률에 대하여 선형적인 관계를 나타내는 반면 일산화탄소(CO)는 지수함수의 형태를 나타낸다. 이러한 결과는 판매시설에서 발생되는 플라스틱 화재의 PBD에 신뢰성있는 화원정보로서 적용될 수 있다. 추후 실제 판매시설에서 적용되는 진열대의 면적이 적용된 추가적인 실험을 통하여 판매시설의 플라스틱 화재에 대표되는 화원 정보로서 적용할 수 있을 것이라 기대된다.

활성화 함수에 따른 유출량 산정 인공신경망 모형의 성능 비교 (Comparison of Artificial Neural Network Model Capability for Runoff Estimation about Activation Functions)

  • 김마가;최진용;방재홍;윤푸른;김귀훈
    • 한국농공학회논문집
    • /
    • 제63권1호
    • /
    • pp.103-116
    • /
    • 2021
  • Analysis of runoff is substantial for effective water management in the watershed. Runoff occurs by reaction of a watershed to the rainfall and has non-linearity and uncertainty due to the complex relation of weather and watershed factors. ANN (Artificial Neural Network), which learns from the data, is one of the machine learning technique known as a proper model to interpret non-linear data. The performance of ANN is affected by the ANN's structure, the number of hidden layer nodes, learning rate, and activation function. Especially, the activation function has a role to deliver the information entered and decides the way of making output. Therefore, It is important to apply appropriate activation functions according to the problem to solve. In this paper, ANN models were constructed to estimate runoff with different activation functions and each model was compared and evaluated. Sigmoid, Hyperbolic tangent, ReLU (Rectified Linear Unit), ELU (Exponential Linear Unit) functions were applied to the hidden layer, and Identity, ReLU, Softplus functions applied to the output layer. The statistical parameters including coefficient of determination, NSE (Nash and Sutcliffe Efficiency), NSEln (modified NSE), and PBIAS (Percent BIAS) were utilized to evaluate the ANN models. From the result, applications of Hyperbolic tangent function and ELU function to the hidden layer and Identity function to the output layer show competent performance rather than other functions which demonstrated the function selection in the ANN structure can affect the performance of ANN.

자기주권신원기술의 국내 서비스 사례 및 연구 과제 분석을 통한 개인정보 주권 강화 방안연구 (A Study on Strengthening Personal Information Sovereignty through Analysis of Domestic Service Cases and Research Projects of Self-Sovereign Identity Technology)

  • 이정현;김지원;김철수;양진홍
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권6호
    • /
    • pp.575-589
    • /
    • 2020
  • 데이터를 기반으로 한 비즈니스가 폭발적으로 성장함에 따라 개인정보가 포함된 데이터의 중요성이 확대되고 있다. 국내의 경우 데이터 3법이 시행됨에 따라 개인정보가 포함된 데이터 활용 시의 규제 개선 및 명문화를 통해 기업들이 개인정보를 보다 적극적으로 활용할 수 있게 되었다. 이러한 상황에서 서비스 이용에 따른 실명 인증 및 개인정보 제공과 관련해 개인정보 제공을 최소화할 수 있는 자기주권신원기술이 주목받고 있다. 특히, 최근 개인정보 이용에 따른 기록의 명확성 및 증명을 위해 자기주권신원 기능 이용 시 블록체인을 활용한 서비스 및 연구들이 활발하게 이루어지고 있다. 본 논문에서는 국내 자기주권신원 서비스의 특징 및 블록체인 기반 자기주권신원기술과 관련된 연구 현황 및 내용을 분석함으로써 향후 데이터 3법 시대의 개인정보 주권을 강화하기 위한 자기주권신원기술 기반 연구 방향을 제시하고자 한다.

IoT 장비에 있어서 실시간 데이터 압축 전송을 위한 BL-beta 유니버설 코드의 경량화, 고속화 연구 (The study on Lightness and Performance Improvement of Universal Code (BL-beta code) for Real-time Compressed Data Transferring in IoT Device)

  • 김정훈
    • 한국정보전자통신기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.492-505
    • /
    • 2022
  • 본 연구는 IoT 센싱 데이터의 무 손실 실시간 전송에 활용 가능한 BL-beta 코드의 엔코딩 및 디코딩 성능 개선을 통해 효과적으로 압축 데이터를 실시간으로 전송하고, 해독할 수 있도록 로직을 개선한 결과에 대한 연구이다. BL-beta 코드의 엔코딩 과정에는 비교적 연산 부담이 큰 로그 함수와 지수 함수, 나눗셈 및 제곱근 연산 등이 포함되어 있는데 이를 개선하여 비트 연산과 이진수 패턴 분석 그리고 비트 패턴을 이용한 뉴턴-랩슨 방법의 초기 값 설정을 통해 빠르게 데이터를 BL-beta 코드로 엔코딩 및 디코딩 할 수 있는 새로운 규칙성을 발견하였으며 이를 적용하여 기존 연구와 비교하여 알고리즘의 엔코딩 속도를 평균 24.8%, 디코딩 속도를 평균 5.3% 개선하였다.

Experimental evaluation of back-to-back anchored walls by double-plates anchors

  • Amir, Najafizadeh;AmirAli, Zad
    • Geomechanics and Engineering
    • /
    • 제31권6호
    • /
    • pp.599-614
    • /
    • 2022
  • One of the methods of stabilizing retaining walls, embankments, and deep excavations is the implementation of plate anchors (like the Geolock wall anchor systems). Back-to-back Mechanically Stabilized Earth (BBMSE) walls are common stabilized earth structures that can be used for bridge ramps. But so far, the analysis of the interactive behavior of two back-to-back anchored walls (BBAW) by double-plates anchors (constructed closely from each other and subjected to the limited-breadth vertical loading) including interference of their failure and sliding surfaces has not been the subject of comprehensive studies. Indeed, in this compound system, the interaction of sliding wedges of these two back-to-back walls considering the shear failure wedge of the foundation, significantly impresses on the foundation bearing capacity, adjacent walls displacements and deformations, and their stability. In this study, the effect of horizontal distance between two walls (W), breadth of loading plate (B), and position of vertical loading was investigated experimentally. In addition, the comparison of using single and equivalent double-plate anchors was evaluated. The loading plate bearing capacity and displacements, and deformations of BBAW were measured and the results are presented. To evaluate the shape, form, and how the critical failure surfaces of the soil behind the walls and beneath the foundation intersect with one another, the Particle Image Velocimetry (PIV) technique was applied. The experimental tests results showed that in this composite system (two adjacent-loaded BBAW) the effective distance of walls is about W = 2.5*H (H: height of walls) and the foundation effective breadth is about B = H, concerning foundation bearing capacity, walls horizontal displacements and their deformations. For more amounts of W and B, the foundation and walls can be designed and analyzed individually. Besides, in this compound system, the foundation bearing capacity is an exponential function of the System Geometry Variable (SGV) whereas walls displacements are a quadratic function of it. Finally, as an important achievement, doubling the plates of anchors can facilitate using concrete walls, which have limitations in tolerating curvature.

확률분포모형을 이용한 하루살이속(Ephemera) 4종의 고도구배에 따른 서식처적합도 평가 (Estimation on Altitudinal Spectrum of Suitability for Four Species of the Mayfly Genus Ephemera (Ephemeroptera: Ephemeridae) Using Probability Distribution Models)

  • 공동수;강보미
    • 한국물환경학회지
    • /
    • 제39권4호
    • /
    • pp.302-315
    • /
    • 2023
  • Distribution characteristics and altitudinal gradient of four species (E. strigata, E. separigata, E. orientalis-sachalinensis group) of the mayfly genus Ephemera (Order Ephemeroptera) were analyzed with probability distribution models (exponential, normal, lognormal, logistic, Weibull, gamma, beta, Gumbel). Data was collected from 23,846 sampling units of 6,787 sites in Korea from 2010 to 2021. The beta distribution model showed the best fit for positively skewed E. orientalis-sachalinensis and little-skewed E. strigata along with altitudinal gradient. The reversed lognormal distribution model showed the best-fit for negatively skewed E. separigata. E. orientalis-sachalinensis distributed at the range of altitude 1~700 m (mean 251 m, median 226 m, mode 124 m, and standard deviation 161 m), E. strigata distributed at the range of altitude 5~871 m (mean 474 m, median 478 m, mode 492 m, and standard deviation 200 m), E. separigata distributed at the range of altitude 7~846 m (mean 620 m, median 659 m, mode 760 m, and standard deviation 181 m). Altitudinal habitat suitability ranges were estimated to be 42~257 m for E. orientalis-sachalinensis, 335~644 m for E. strigata, and 641~824 m for E. separigata. Based on the altitudinal spectrum of suitability and altitude-related temperature analysis results, E. orientalis-sachalinensis was estimated to be thermophilic, E. strigata to be mesophilic, and E. separigata to be thermophobic. This is the first national-scale evaluation of the altitudinal distribution of Ephemera in Korea. These results will be used in a further research study on altitudinal shift of the species of Ephemera under climate change.

액상화 가능성이 있는 지반에 놓인 지반-말뚝 시스템의 동적 p-y 곡선 연구 (Evaluation of the Dynamic P-Y Curves of Soil-Pile System in Liquefiable Ground)

  • 한진태;김성렬;김명모
    • 한국지반공학회논문집
    • /
    • 제23권3호
    • /
    • pp.141-147
    • /
    • 2007
  • 말뚝의 동적 응답 해석을 위한 다양한 방법들이 개발되어 있으며, 이 중에서 비선형 스프링, p-y 곡선을 이용하여 지반-말뚝 상호작용을 고려하는 방법이 널리 사용되고 있다. 그러나, 현재 사용되는 동적 p-y 곡선은 정적 또는 주기 하중에 의한 횡방향 재하 시험에 의해 개발되었다. 또한, p-y 곡선에 scaling factor를 도입하여 액상화에 의한 지반-말뚝 상호작용의 영향을 모사하고자 하는 시도가 이루어져 왔으나, 지금까지 정확한 scaling factor를 산정하지 못하고 있는 실정이다. 이에 본 연구에서는 Ig 진동대 실험으로부터 구한 말뚝 주변 지반의 과잉간극수압과 지반-말뚝 시스템의 고유진동수 관계 및 수치해석으로부터 구한 말뚝 주변 지반의 탄성계수의 변화와 지반-말뚝 시스템의 고유진동수 관계로부터, 말뚝 주변 지반의 탄성계수의 변화로 표현되는 p-y 곡선의 scaling factor를 구하였다. 그 결과, scaling factor는 과잉간극수압비에 따른 지수 함수의 형태로 나타났다.

구리가 함침된 하이드로탈사이트 촉매의 고유 키네틱 데이터를 이용한 메탄올 수증기 개질반응의 고정층 반응기 CFD 시뮬레이션 (FBR CFD Simulation of Steam Methanol Reforming Reaction using Intrinsic Kinetic Data of Copper-impregnated Hydrotalcite Catalyst)

  • 이재혁;신동일;안호근
    • 한국가스학회지
    • /
    • 제27권1호
    • /
    • pp.78-85
    • /
    • 2023
  • 구리가 함침된 하이드로탈사이트 촉매의 고유 키네틱 데이터를 이용하여 메탄올 수증기 개질 반응의 고정층 반응기 Computational Fluid Dynamics(CFD) 시뮬레이션을 수행하였다. 이전 연구결과로부터 얻어진 20wt%의 구리가 함침된 하이드로탈사이트 촉매의 활성화 에너지는 97.4 kJ/mol, 전 지수 인자는 5.904 × 1010를 이용하였다. 그리고 고유의 키네틱 데이터를 사용하여 반응온도 (200-450 ℃) 및 메탄올과 물의 몰비 변화에 따른 전환율을 관찰하였다. 또한 위의 키네틱 상수를 power law 모델을 사용하여 Axial 2D Symmetry 시뮬레이션을 통해 상용반응기(I.D. 0.05 - 0.1 m, Length 1 m)의 열 및 물질유동해석을 예측하였다.

사질토의 미소변형 전단탄성계수에 대한 고결영향 분석 (Analysis of Cementation Effect on Small Strain Shear Modulus of Sand)

  • 이문주;추현욱;최성근;이우진
    • 대한토목학회논문집
    • /
    • 제29권2C호
    • /
    • pp.51-58
    • /
    • 2009
  • 본 연구에서는 챔버에 조성된 미고결, 고결모래에 대한 벤더엘리먼트 시험으로부터 사질토 미소변형 전단탄성계수인 $G_{max}$를 평가하였다. 시험결과, 본 연구에서 사용된 파쇄모래의 $G_{max}$는 기존의 연구에 사용된 자연상태 모래의 $G_{max}$보다 35~50% 작게 평가되었으나, 고결모래의 $G_{max}$는 이전 연구 결과보다 크게 평가되었다. 모래의 $G_{max}$는 고결유발제로 사용된 석고의 함유율에 가장 큰 영향을 받았으며, 석고함유율에 따라 지수적으로 증가하였다. 상대밀도의 증가는 미고결 모래보다 고결모래의 $G_{max}$ 증가에 더 큰 영향을 미치는 것으로 관찰되었으며, 유효연직응력의 증가는 고결모래의 $G_{max}$보다 미고결 모래의 $G_{max}$ 증가에 더 큰 영향을 미쳤다. 이와 같은 영향요인 분석을 바탕으로 고결모래의 $G_{max}$를 간극비, 유효연직구속압 뿐만 아니라 석고함유율에 따른 함수로 표현하였다.