• Title/Summary/Keyword: explosives

Search Result 1,149, Processing Time 0.024 seconds

Calculation of Blast Load Including Interior Explosion Effects (실내폭발 효과를 포함한 폭발하중 산정)

  • Kim, Seong-Hwan;Kim, Han-Soo
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.30 no.3
    • /
    • pp.191-198
    • /
    • 2017
  • To study the behavior of structures subject to blast loads it is important to calculate the loads due to the explosives accurately, especially in the case of interior explosions. It is known that numerical method based on computational fluid dynamics can estimate relatively accurate blast load due to the interior explosion including reflection effect. However, the numerical method has disadvantages that it is difficult to model the analysis and it takes much time to analyze it. Therefore, in this study, the analytical method which can include the reflection effect of the interior explosion was studied. The target structures were set as the slabs of residential buildings subject to interior explosion that could lead to massive casualties and progressive collapses. First, the numerical method is used to investigate the interior explosion effect and the maximum deflection of the slab which was assumed to be elastic, and compared with the analytical method proposed in this study. In the proposed analytical method, we determine the weighting factor of the reflection effect using the beam theory so that the explosion load calculation method becomes more accurate.

Estimation of Potential Population by IED(Improvised Explosive Device) in Intensive Apartment Area (아파트 밀집지역 급조폭발물 테러 발생 시 잠재피해인구 추정)

  • Lee, Kangsan;Choi, Jinmu
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.18 no.1
    • /
    • pp.76-86
    • /
    • 2015
  • In this study, we presented a method for estimating the potential population damage of the Seoul Nowon-gu area in the event of a terrorist using a vehicle improvised explosive devices (IED). Using the object-based building extraction method with orthophoto image, the area of the apartment has been determined, and the apartment's height and level were estimated based on the elevation data. Using the population estimation method based on total floor area of building, each apartment resident population was estimated, and then potential population damage at the time of terrorist attacks was estimated around the subway station through a scenario analysis. Terrorism damage using IED depends on the type of vehicle greatly because of the amount loadable explosives. Therefore, potential population damage was calculated based on the type of vehicle. In the results, the maximum potential damage population during terrorist attacks has been estimated to occur around Madeul station, Nowon-gu. The method used in this study can be used various population estimation research and disaster damage estimation.

  • PDF

A case study on the reduction of Blasting vibration using EDD in tunnel (터널에서 전자뇌관을 이용한 발파진동 저감 기술 사례)

  • Yoon, Ji-Sun;Lee, Jin-Moo;Cho, Young-Gon
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2004.03b
    • /
    • pp.433-441
    • /
    • 2004
  • 국내 발파 현장에서 사용되고 있는 폭약류에 강력한 폭굉력을 충분하게 발휘하기 위해서는 뇌관(Blasting cap, Detonator)의 역할이 중요하다. 그리고 이 뇌관의 정밀성에 따라 발파 효율의 차이가 있게된다. 초기의 도화선 및 공업뇌관에서 시작하여 현재 정밀성 면에서는 MS(Milli Second)뇌관의 경우 20ms또는 25ms의 정밀한 시차로 순차적으로 기폭함으로써 발파효과의 극대화와 소음 및 진동제어에 큰 효과를 이루었으나, 최근 개발된 진자뇌관의 경우 자체 IC회로를 내징하여 $1{\sim}2ms$의 초정밀시차(오차범위 $0.1{\sim}0.2ms$이내)의 구현이 가능해짐에 따라 이를 적절히 조합하여 설계함으로써 각종 제어발파, 파쇄도 향상, 암손상영역 저감 등의 효과에 대해 국외에서 연구가 진행되고 있는 것으로 알려지고 있다. 그러나 우리나라와 같이 도심지 발파 및 터널이나 노천 현장 근거리에 보안물건이 위치해 있어 진동제어가 절실히 필요한 상황에서 진동제어에 효과가 있는 것으로 알려진 전자뇌관에 대한 연구가 이루어지고 있지 않은 상황에서 본 연구는 앞으로 이루어질 전사뇌관에 대한 수많은 연구에 기초자료를 제공하고자 실시하였다. 본 연구에서는 이를 위해 국내에서 최초로 2003년 9월 23일 강원도 양구 지역읜 00터널에 전자뇌관을 이용한 시험발파를 실시하였고, 발파에 의한 진동 등을 조사하여 그 효율성을 검토하였다. 이를 위해 전자뇌관의 특성과 장점을 최대한 살리기 위하여 각공을 발파하는 방식, 즉 1지발에 1공을 발파하는 방식을 채택하고 비전기 뇌관과 전자뇌관으로 설계를 하여 각각의 발파효율을 비교하여 보았다. 그 결과 발파신동의 경우 비전기뇌관을 이용하여 1공씩을 1지발로 발파를 한 경우에는 18${\sim}$56%의 진동저감 효과가 있었고, 번 설계에 의해 진해오딘 발파에 비하여는 최대 70% 이상의 진동저감 효과가 있는 것으로 나타났다.

  • PDF

Experimental Study on Design Parameters of Explosive-driven High-intensity Flash Generator (폭발형 고섬광 발생장치의 설계 변수에 관한 실험적 연구)

  • Kim, Kyung Sik;Ahn, Jae-Woon;Yang, Hui-Won;Kwon, Mi-Ra
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.40 no.5
    • /
    • pp.283-288
    • /
    • 2016
  • A non-lethal weapon is a device that can subdue targets without causing death or mortal wounds. A high-intensity flash generator can negate electro-optical sensors and cause temporal flash blindness with a high intensity of light. In this study, we derive the design parameters of an explosive-driven high-intensity flash generator that uses the interaction of plasma caused by the detonation of explosives with surrounding inert gas. To determine the design parameters of the flash generator, we analyze test results measured using optical sensors. The experimental results show that the light intensity of xenon gas is about four times higher than that of air. In addition, the intensity increases with the weight of the explosive, and the inert gas cross-sectional area encountered a shock wave in the airframe. The light intensity caused by a double-initiation generator is about two times higher than that of the single-initiation generator.

Synthesis of a Nitrogen-rich Insensitive Energetic Material, DNAM(Dinitroammeline) (고질소 둔감에너지 물질인 DNAM(Dinitroammeline) 합성공정 개발)

  • Sul, Minjung;Kim, Minjun;Kim, Jinseuk;Kim, Seunghee
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.20 no.1
    • /
    • pp.50-57
    • /
    • 2016
  • We studied the Lab-scale process for the development of DNAM in aspect of safety and overall efficiency. Melamine is used for starting material of process, DNAM was synthesized by oxidation and nitration reaction. In order to optimize the process parameters with the product in higher yield and purity, a systematic study with variation of different parameters like molar ratio of nitrating mixture, conditioning time and order of reactant was carried out. The optimized reaction conditions for the synthesis of DNAM were : conditioning time of $3{\pm}3.5$ hour and nitrating mixture in 1:1.4 molar ratio. In order to proceed a stable reaction, melamine was added with enough time to relieve reaction heat. From these reaction condition, DNAM could be obtained in a yield of more than 60%.

대규모 발파 후보지의 지하구조 학인을 위한 탄성파 굴절법 조사

  • Kim, Gi-Yeong;Kim, Dong-Hun
    • Journal of the Korean Geophysical Society
    • /
    • v.5 no.2
    • /
    • pp.153-161
    • /
    • 2002
  • In order t determine blasting sites for the crustal refraction studies in the korean peninsula, seismic refraction profiling was conducted at two sites in the reclaimed land of Seosan. At a quarry for construction material and another site on a rice field 2km east of the quarry, 24 channel refraction profiling of 46m was conducted at a geophone spacing of 2m. Seismic velocity profiles obtained through tomographic invesion reveal that the quarry is regarded as an ideal place for blasting based on the observation that fresh basements with seismic velocities of 3,900 m/s or greater locate approximately 6m deep. On the contrary, under the reclaimed rice field, the basements are weathered more, of slower velocities, and buried deeper than quarry, indicating not an ideal location for detonating seismic explosives of large amounts.

  • PDF

A Case of Pulmonary Injuny Induced by Accidental Exposure to High Level of Nitrogen Dioxide ($NO_2$) (고농도의 이산화질소($NO_2$)흡입으로 유발된 급성 폐손상 1례)

  • Chang Jin Hyuck;Kim Do Youn;Kim Young;Chang Yoon Soo;Kim Hyung Jung;Ahn Chul Min;Kim Sung Kyu;Kim Tae Hoon
    • Journal of The Korean Society of Clinical Toxicology
    • /
    • v.3 no.1
    • /
    • pp.40-44
    • /
    • 2005
  • Nitrogen dioxide ($NO_2$), which produced during the process of silage, metal etching, explosives, rocket fuels, welding, and by-product of burning of fossil fuels, is one of major components of air pollutant. Accidental exposure of high level of $NO_2$ produces cough, dyspnea, pulmonary edema which may be delayed $4\~12$ hours and, in $2\~6$weeks, bronchiolitis obliterans. We experienced a case of acute pulmonary injuny induced by industrial exposure to high level of $NO_2$ during repair of $NO_2$ pipeline in a refinery. A 55-year-old man experienced nausea and severe dyspnea in 6 hours after $NO_2$ inhalation. Initial blood gas examination revealed severe hypoxemia accompanying increased alveolar-arterial O2 difference. Radiological examination showed diffuse ground glass opacities in both lung fields. Clinical symptoms and laboratory findings, including radiological study and pulmonary function test were improved with conservative treatment using inhaled oxygen and bronchodilator. and there was no evidence of bronchial fibrosis and bronchiolitis obliterance in chest high resolution computed tomography performed 6 weeks after exposure. Here, we report a case of $NO_2$ induced acute pulmonary injuny with a brief review of the relevant literature.

  • PDF

A Case Study of Air Deck Blasting Method (Air Deck 발파공법의 현장적용에 관한 연구)

  • Lee Shin;Kim Sang-Wook;Kang Dea-Woo
    • Tunnel and Underground Space
    • /
    • v.16 no.2 s.61
    • /
    • pp.156-165
    • /
    • 2006
  • Already, vari-stem, gas-bag, power deck, air ball etc. are used by various blasting methods to take the advantage of air decking technology in abroad. Air tube product has been used continuously in domestic and air ball product was made recently. In the case study, we analyzed about the application and the effect or air deck blasting method in domestic blasting area. As results or this case study, it was shown that blasting vibration was decreased about $21{\sim}41%$ and quantities or explosives was decreased about $17{\sim}30%$. Also, in the case of using air deck blasting method, fragmentation was shown to be smaller than common blasting method.

Experiment and Evaluation of Mist Diffusion from Water Tube for Blasting Dust Control in accordance with the Explosives Position (폭약 기폭위치에 따른 발파 분진제어용 워터튜브 주입수의 분무확산 실험 및 평가)

  • Yang, Hyung-Sik;Ko, Young-Hun;Kim, Jung-Gyu;Noh, You-Song;Park, Hoon;Cho, Sang-Ho
    • Tunnel and Underground Space
    • /
    • v.25 no.1
    • /
    • pp.46-55
    • /
    • 2015
  • A water tube with detonating cord was devised to control the blast dust. Water diffusion experiments with different detonating cord positions were conducted during the series of experiments to optimize the design parameters of the tube. Images from high speed camera were analyzed to evaluate the results. AUTODYN program was adopted to simulate the diffusion process of water and compared with the images. Diffusion of water shows cross flow in case of external charge while the internal case shows radial flow. A bubble ring was formed during the numerical analysis of internal charge case as occurred in underwater blast. An additional bubble ring was formed by the reflection pressure from the ground. And the Weber number was determined as sufficient for spray atomization performance of the water tube.

Genetic Transformation of Irpex lacterus and Phlebia tremellosa to an Antibiotic Resistance (아교버섯과 기계충버섯의 형질전환)

  • Kim, Yun-Jung;Kim, Myung-Kil;Song, Hong-Gyu;Choi, Hyoung-T.
    • Korean Journal of Microbiology
    • /
    • v.43 no.2
    • /
    • pp.147-149
    • /
    • 2007
  • White-rot fungi which degrade lignin can also degrade diverse recalcitrant compounds such as polymeric dyes, explosives, pesticides, and endocrine disrupting chemicals. Lignin degrading enzymes are involved in the degradation reactions, and introduction of foreign genes into a white-rot fungus is required in order to increase the degrading capacity. Genetic transformation experiment has been carried out in Irpex lacteus and Phlebia tremellosa to an antibiotic resistance. The transformation yields were 50-70 transformants/${\mu}g$ DNA and 15-25 transformants/${\mu}g$ DNA in I. lacteus and P. tremellosa, respectively. The stable replication of the plasmid was confirmed by PCR using the plasmid-specific primers, and many mutants were generated during this integration in both fungi.