• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.447-451
• /
• 2002

The explosive compaction for processing of electrode material was realized based on axisymmetric loading scheme. The compression of internally oxidized fraction of the alloy Cu-0.15%BeO alloy did not provide a considerable strengthening effect; average microhardness varied from 130 to l50Mpa. The tensile strength comes to 30Mpa. However this method can be applicable to obtain a dense briquette for further extrusion of electrode.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.323-325
• /
• 2013

This study on the proposes a spalling mechanism based on the results of a fire resistance test of HSC(High Strength Concrete) considering important factors of spalling occurrence. The factors considered in this two-sided are fire resistance test to ISO 834 fire curve. In this study, explosive spalling phenomena in the specimens were investigation.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.116-122
• /
• 2002

Electro Explosive Devices can be susceptible to electromagnetic interference. When these components are exposed to external electromagnetic fields, it may cause to induce sufficient current to generate enough heat for an inadvertent detonation. It is almost impossible to monitor the event of firing throughout the electromagnetic environment test. The survivability of EED for hazards of electromagnetic radiation is investigated. A fiber optic sensor is installed near the bridge wire after removing explosive material in order to measure the induced current on the bridge wire. The length of lead-wire of the EED fabricated is around 15 cm.

• 한국화재소방학회논문지
• /
• 제10권2호
• /
• pp.13-19
• /
• 1996

An estimation methodology, based on statistics and numerical method, has been developed for estimating the upper explosive limits(UEL) of paraffinic and olefinic hydrocarbon compounds. With proposed method, the UEL has been calculated for 24 paraffinic and 10 olefinic hydrocarbon compounds. The estimated the UEL agree with the experimental values within a few percent. A comparisond with four other methods avaiable in the literature are also presented. It is hoped eventually that this method will permit estimation of the UEL with improved accuracy and broader application for other compounds.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.130-131
• /
• 2015

These days, as the usage of explosive gas is increased, the demand of safety of explosive gas is increased. As a suggestion of protection against the explosive gas, the research on application of fiber-reinforced concrete has been conducted. In this research, therefore, to evaluate the constructability of anti-explosive concrete, the engineering properties of the FRC after pumping is studied.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1108-1114
• /
• 1992

본 연구에서는 폭발용접 성능평가에 중요한 영향을 주고 있는 기폭방법을 비 교하고, 선형 충격파의 발생방법과 이에 의한 접합 결과를 실험적으로 나타내고자 한 다.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.610-617
• /
• 2020

In process installations, chemicals operate at high temperature and high pressure. Propylene is used as a basic raw material for manufacturing synthetic materials in the petrochemical industry; However, it is a flammable substance and explosive in the gaseous state. Thus, caution is needed when handling propylene. To prevent explosions, an inert gas, carbon dioxide, was used and the changes in the extent of explosion due to changes in pressure and oxygen concentration at 25 ℃, 100 ℃, and 200 ℃ were measured. At constant temperature, the increase in explosive pressure and the rates of the explosive pressure were observed to rise as the pressure was augmented. Moreover, as the oxygen concentration decreased, the maximum explosive pressure decreased. At 25 ℃ and oxygen concentration of 21%, as the pressure increased from 1.0 barg to 2.5 bar, the gas deflagration index (K_g) increased significantly from 4.71 barg·m/s to 18.83 barg·m/s.

• 화약ㆍ발파
• /
• 제27권1호
• /
• pp.53-61
• /
• 2009

대한민국의 화약생산 기원은 고려시대에 중국으로부터 흑색화약이 처음으로 전수되었으며, 1890년 경남마산에서 흑색화약이 채광발파에 처음 사용되었고, 최근에는 지하철굴착 도로굴착 건물폭파해체 등 거의 대부분의 건설시장에 에멀젼폭약을 사용하는 진동제어발파공법 기술이 자리를 잡게 되었다. 2006년 12월에는 세계에서 처음으로 진동제어발파공법을 위주로 한 발파설계 시공지침을 국가와 전문학회의 주도로 완성하였다.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.19-22
• /
• 2003

For CHNO explosives, two new correlations of the form $P_{CJ}\;=\;8.7({\alpha}T_c')^{1/2}{\rho}_0^2-5\;and\;P_{CJ}\'=\'9.5({\alpha}T_c')^1/2{\rho}_0^2-9$ have been demonstrated, which relate detonation pressure, $P_{CJ}$; combustion temperature of the explosive in gas phase, $T_c$; combustion temperature of the explosive in crystalline state, $T_c'$; and the number of moles of gaseous products per unit weight of explosive, α; at initial density of the explosive, ${\rho}_0$. Experimental and semi-empirical PM3 procedures were used for the computation of $T_c$. Detonation pressures derived in this manner have a simple form without need to use computer code.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.521-524
• /
• 2005

This study is an experiment for reducing effect of explosive spalling by fiber addition ratio and kinds of fiber at high performance concrete. So, high strength concrete were made addition to PVA and PP fiber as diameter of 34, 100 $\mu$m and 40 $\mu$m by fiber addition ratio as 0.05, 0.1, 0.3$\%$. After those were heated respectively for 30 in accordance with Standard Time-Temperature Curve. And then conditions of explosive spalling were divided into four grades, and characters of explosive spalling were investigated.