• 한국추진공학회지
• /
• 제21권3호
• /
• pp.84-90
• /
• 2017

폭발볼트는 각종 유도무기 및 우주발사체에서 결합 및 분리기능을 수행한다. 이처럼 유도무기 체계에서 폭발볼트의 역할은 매우 중요하며, 임무 실패시 체계 전체 실패의 원인이 될 수 있다. 이와 같은 이유로 폭발볼트의 설계 수명 예측에 대한 요구가 최근에 지속적으로 발생하였지만, 신뢰도 높은 예측방법이 제시되지 못하고 있다. 기존의 가속노화 방법을 적용하기 위해선 폭발볼트의 활성화 에너지와 가속계수를 알고 있어야 한다. 현재 가속노화에 필요한 정보를 정확히 확보하지 못한 상황에서 폭발볼트의 설계 수명을 예측하는 것은 어렵기 때문에 본 연구에서는 실제 10년 이상 자연 노화된 폭발볼트를 이용해 성능을 평가하고, 이를 바탕으로 최소한의 설계 수명을 제시하였다.

• 한국추진공학회지
• /
• 제20권2호
• /
• pp.67-74
• /
• 2016

폭발볼트는 고폭약를 사용하는 분리장치의 하나로서 폭발볼트의 내부에서 형성되는 폭압 및 충격파에 의해 분리된다. 이러한 메커니즘을 갖는 폭발볼트는 분리시 생성되는 충격파 및 파편형성 최소화되도록 설계되어야 할 것이다. 본 연구에서는 폭발볼트 및 볼트를 구속하는 구속물과의 거리(Air gap)을 변수로 두어 분리시험을 수행하였다. 이때 Air gap 따른 분리유무 및 분리 형상을 확인 하였고, 가속도 센서를 이용하여 구속물의 전달되는 Pyro-shock를 측정하였다. 또한 ANSYS Autodyn 프로그램을 이용하여 폭발볼트의 분리거동을 해석하였다. 실험 및 해석으로부터 폭발볼트와 구속물 사이의 Air gap 크기에 따른 폭발볼트의 분리거동에 미치는 영향을 확인하였고 특정 볼트에 한해서 최적의 폭발볼트의 구속환경을 설정하였다.

• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.437-443
• /
• 2024

The purpose of radiological Dispersal Device(RDD) is to kill people by explosives and to cause radiation exposure by dispersing radioactive materials. And It is a form of explosive that combines radioactive materials such as Co-60 and Ir-192 with improvised explosives. In this study, we tested and evaluated whether it was possible to read the internal structure of an explosive using X-rays in a radioactive explosive situation. The improvised explosive device was manufactured using 2 lb of model TNT explosives, one practice detonator, one 9V battery, and a timer switch in a leather briefcase measuring 41×35×10 cm³. The radioactive material used was the Co-60 source used in the low-level gamma ray irradiation device operated at the Advanced Radiation Research Institute of the Korea Atomic Energy Research Institute. The radiation dose used was gamma ray energy of 1.17 MeV and 1.33 MeV from a Co-60 source of 2208 Ci. The dose rates are divided into 0.5, 1, 2, and 4 Gy/h, and the exposure time was divided into 1, 3, 5, and 10 minutes. Co-60 source was mixed with the manufactured explosive and X-ray image reading was performed. As a result of the experiment, the X-ray image appeared black in all conditions divided by dose rate and time, and it was impossible to confirm the internal structure of the explosive. This is because γ-rays emitted from radioactive explosives have higher energy and stronger penetrating power than X-rays, so it is believed that imaging using X-rays is limited By blackening the film. The results of this study are expected to be used as basic data for research and development of X-ray imaging that can read the internal structure of explosives in radioactive explosive situations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.749-754
• /
• 2004

Up to now, non-explosive demining system adaptable to a mobile robot has been developed. This system has much smaller platform and consists of non-explosive mechanism. Brief experiment indoors showed thai developed demining system can remove landmines well. But, out of doors, some problems are detected i.e. Inclination of overall system causes a suspension of rake rotation. In this research, a study on performance improvement of developed non-explosive demining system is mainly discussed. To compensate the inclination of the system, mechanical sensor composed of shaft and spring is used. This sensor gives a signal to a leadscrew motor and controls a rotating direction. From an experiment, it is confirmed that the mechanical sensor as stated is a good solution of the inclination of the system.

• 화약ㆍ발파
• /
• 제28권1호
• /
• pp.55-62
• /
• 2010

광산의 채광장 활용을 위해 갱도 내에서 폭발압접이 계획되었다. 폭발압접의 입사압력에 의해 영향을 받을 것으로 예상되는 갱도의 천단부와 주변 광주의 안정성 분석 실시하였다. 폭풍압의 예측은 일반식, CONWEP 및 DDESB의 식을 이용하였다. 분석결과 폭발압접이 지속적으로 이뤄진다면 광산 채굴적에 상당한 영향을 줄 수 있을 것으로 판단되었다.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.155-161
• /
• 2005

Up to now, a lot of unmanned demining systems have been developed. However, some inferiority surely exist by reason of their large platform and explosive mechanism. To settle this inferiority, non-explosive demining system adaptable to a mobile robot already has been developed. Brief experiment indoors showed that developed demining system can remove landmines well. But, out of doors, several problems are detected. In this research, a study on the performance improvement of developed non-explosive demining system is mainly discussed. To overcome downhill effect, mechanical sensor composed of shaft and spring is used. It is confirmed that clearance depth control using the mechanical sensor is a good solution for the inclination of the system.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.243-248
• /
• 2001

The present work is described the design factors and separation mechanism of ridge-cut explosive bolt in order to optimize the stage separation characteristics. Characteristics of test samples would differ depend on the detonating devices, the shape and size of bolt body, the amount of loading explosives, and the confinment conditions of bolt. Based on the results from these experimental factors, it appears to optimal condition of ridge-cut explosive that the amount of loading explosive seems to be near 110mg of RDX, the height of loading explosive is 3.5mm, the thickness of bolt is 3.9mm, and the degree of ridge is approximately $120^{\circ}$

• Journal of Welding and Joining
• /
• 제14권2호
• /
• pp.65-70
• /
• 1996

Detonation velocity of domestic expolsives was measured using the Dautriche method. The variables employed in this study were the thickness of explosive and the amount of salt added in the ammonium nitrate(AN) explosive. As the results of this study, it was shown that the detonation velocity increases with an increase of explosive thickness but decreases with an increase of salt content. It was further demonstrated that the detonation velocity decreases rather rapidly when the salt content increases over 20 percent. In addition, the accuracy of Dautriche method was evaluated as a preliminary study and its result showed that this method is quite reliable with an experimental error of less than 10 pct.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.477-480
• /
• 2006

Normally, with all ensuring the fire resistance structure as a method of setting the required cover thickness to fire, the RC is significantly affected from the standpoint of its structural stability that the compressive strength and elastic modulus is reduced by fire. Especially, high strength concrete and lightweight aggregate concrete is occurred serious fire performance deterioration by explosive spalling. Thus, this study is concerned with explosive spalling of lightweight concrete using structural lightweight aggregate. From the experimental test result, lightweight aggregate concrete is happened explosive spalling. The decrease of cross section caused by explosive spalling made sharp increasing gradient of inner temperature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.667-670
• /
• 2003

The purpose of this study is to present data for the reusing, reinforcement and estimation of safety of the RC structure damaged by fire, and for the prevention of explosive spalling by checking the character of explosive spalling according to kinds of fine aggregate, admixture and water-cement ratios. The materials used fine aggregates were sea sand, crushed sand and recycled sand, and the admixtures were fly ash and blast-furnace slag. Also the water-cement ratios was 55% and 30.5%. After those were heated respectively for 30 and 60 minutes in accordance with Standard Time-Temperature Curve. And then conditions of explosive spalling were divided into five grades, and characters of explosive spalling were investigated.