• 한국초등과학교육학회지:초등과학교육
• /
• 제26권1호
• /
• pp.12-23
• /
• 2007

The purpose of this study was to research the effects of students' evaluation results on teachers' teaching activities. The subjects were 431 elementary school students of 4th, 5th and 6th grade, and 14 teachers of 7 schools located in Seoul, Cheongju, and Daejeon city. The experimental design included pre and post-tests with the control group. Our results found that most of the students had positive thoughts towards science classes. In particular, activities where the teachers provided support in the conduct of experiments and the learning atmosphere generally were evaluated higher than other activities. However, unrestricted experiments were evaluated lower by the students. The feedback from the students' evaluation results of their teachers affected the teachers' teaching activities statistically. The teachers' support during experiments, unrestricted activity during experiments, and evaluation activities were changed positively following the students' feedback. However, the loaming atmosphere and unrestricted activity during experiments were observed to change negatively when the teachers were not given the students' feedback.

• 설비공학논문집
• /
• 제12권4호
• /
• pp.404-413
• /
• 2000

Environmental chamber (EC) is an experimental facility used to analyze the characteristics of thermal response of testing objects by the artificial control of weather conditions. The EC in KIER can simulate the weather conditions by the control of temperature, humidity, and solar radiation. A two-storied testing building is located inside of EC. For the exact thermal response analysis of testing building, monthly or yearly scheduled operations are necessary. Although this long term operation gives the exact experimental data, it requires a high operational cost, long duration, and lots of manpower. Therefore it is necessary to perform the shortened experiments without sacrificing the validity of the obtained results. Since the characteristics of thermal response from the shortened experiments are different from the full time results, the analytical method to analyze the thermal response from the shortened experiments to estimate a full times results is developed in this study. The thermal response of testing building is performed using commercial software TRNSYS.

• 공학교육연구
• /
• 제13권5호
• /
• pp.25-28
• /
• 2010

The objective of this project is to cultivate interest among junior high school students toward Science & Technology. Six simple experiments will be introduced to the participants (junior high school students) of this project which is focusing on the basic principles of engineering including law of motion, free-fall, force, energy, friction and work. Our student team has been assigned to design six set of experiment according to the principles. The experiments are easy to understand and simple to assemble by the students of age 13 to 15. Experimental manuals were written by the members using simple words complete with figure so that all the participants can understand the procedure of each experiment. In order to make sure the manuals are practically working, the experiment sets were tested and the results were compared with actual theory. As a result, we believe that the experiments can be done by the students within less supervision. The students are able to set up the experiments by using some simple equipment around them. By doing this experiments, we can further our understanding and explain better the principles of energy, force and work.

• 한국환경복원기술학회지
• /
• 제2권1호
• /
• pp.72-82
• /
• 1999

The objective of this study was to covering of vine the traffic noise barrier and analyse of their growth characteristics. For the purpose of the experiments, chosen were 28 plants. In January 1996 to December 1998, the nursery seedbeds on the Chonju Arboretum in Korea Highway Corporation were seeding and cutting with those species, and a few species were carried out Honam Highway field experiments. The results are summarized as follows ; The germination ratio of seedbed experiments were Wisteria floribunda(88%), Lonicera japonica(86%), Parthenocissus tricuspidata, Paederia scandens(85%), Celastrus orbiculatus(76%), Clematis terniflora var. denticulata(52%), Clematis mandshurica(44%) respectively. The rooting ratio of cutting experiments were Trachelospermum asiaticum var. intermedium(88%), Parthenocissus quinquefolia(87%), Trachelospermum asiaticum var. asiatica(85%), Kadsura japonica(82%), Hedera rhombea(81%), Euonymus fortunei var. radicans(83%), Trachelospermum jasminoides var. pubescens(80%), Lonicera japonica cv. Aureo-reticulata(80%), Trachelospermum asiaticum var. majus(78%), Euonymus radicans cv. Aureo-marginata(66%), in descending order. As a conclusion, this study shows that the traffic noise barrier was effected by Paederia scandens, Lonicera japonica, Parthenocissus quinquefolia, Wisteria floribunda, Parthenocissus tricuspidata in the field experiments and the others were necessary to maintainable management.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.141-146
• /
• 2002

This paper has studied to obtain the grinding characteristics and optimal grinding conditions of ceramic materials in the grinding with diamond wheel by design of experiments. The load on wheel by varying the feed rate was related with the surface roughness due to the minute destruction phenomenon of grains for the $Si_3\;N_4\;and\;ZrO_2$. The depth of cut is related with the surface roughness because the grinding is carried out by grain shedding process due to the brittle fracture phenomenon for the $A1_2\;O_3$. The major factors affecting the surface roughness and the optimum grinding conditions were obtained with minimum experiments using design of experiments.

• 천문학논총
• /
• 제25권1호
• /
• pp.15-21
• /
• 2010

We report results of image simulations of the KVN and VLBI experiments of the KVN with several other East Asia VLBI facilities. To investigate their imaging capability a model-generated image of 7 mm SiO maser emission in Mira variables is used. The resulting simulations show that the joint VLBI experiments of the KVN with East Asia VLBI facilities can produce reasonably good images at 7 mm spectral line experiments. However, there are no apparent differences in peak flux densities and images themselves in the simulations among different combinations of these facilities. In addition, the simulated images of observations which include bigger antennas do not show any expected improvement to the image sensitivity. The small variations in the peak flux density and similar image sensitivity, irrespective of different antenna sizes or numbers of baselines used in the simulations, turn out due to a specific characteristic of the adopted model image. Test simulations using another SiO maser image from R Cas observations prove that the participation of bigger antennas in the VLBI experiments does improve image sensitivity. We confirm the need of additional longer baselines in the experiments of the East Asia VLBI facilities to study very compact maser clumps on sub-milliarcsecond scales.

• 한국응용곤충학회지
• /
• 제39권2호
• /
• pp.111-115
• /
• 2000

1995년 전국 8개도 37개점의 밭토양으로부터 분리한 52균주의 선충 포식성곰팡이를 이용하여 실내 및 온실에서 부식성선충과 뿌리혹선충을 이용하여 포식력을 비교하였다. 실내검정에서 부식성선충에 대하여 91% 이상의 포식력을 보인 균주는 51균주였고, 부리혹선충에 대하여는 26균주였으나, 온실 검정에서는 81%의 포식력을 보인 균주가 3균주로 온실검정과 실내 검정간 상관 유의성은 없었다. 선발된 3균주는 부식선충 및 뿌리혹선충에 대하여 실내 및 온실실험에서 모두 높은 포식력을 나타내었다. 이 실험으로 미루어 볼 때, 천적 포식성곰팡이 선발 시험은 반드시 포장 조건과 가장 유사한 상태에서 실시되어야 할 것으로 보인다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권3호
• /
• pp.18-26
• /
• 2001

Environmental chamber (EC) is an experimental facility used to analyze the characteristics of thermal response of testing objects by the artificial control of weather conditions. The EC in KIFR can simulate the weather conditions by the control of temperature, humidity, and solar radiation. A two-storied testing building is located inside EC. For the exact thermal response analysis of testing building, monthly or yearly scheduled operations are necessary. Although this long term operation gives the exact experimental data, it requires a high operational cost, long duration, and lots of manpower. Therefore it is necessary to perform the shortened experiments without sacrificing the validity of the obtained results. Since the characteristics of thermal response from the shortened experiments are different from the full time results, the analytical method to analyze the thermal response from the shortened experiments to estimate a full times results is developed in this study The thermal response of testing building is performed using commercial software TRNSYS.

• 한국해양공학회지
• /
• 제34권4호
• /
• pp.253-262
• /
• 2020

This study provides a comparative analysis of experiments-based enhancements and sensitivity evaluations for the structural design of an automatic ocean salt collector under various load conditions. The sizing variables of the structural members were considered as design factors. The strength and weight performances were selected as output responses. The design of experiments used in the comparative study consisted of the orthogonal array design, Box-Behnken design, and central composite design. The response surface model, one of the metamodels, was applied to the approximate model generation. The design enhancement performance metrics, including numerical costs and weight minimization, according to the design of experiments, were compared from the best design case results. The central composite design method showed the most enhanced design results for the structural design of the automatic ocean salt collector.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.41-47
• /
• 2016

The rolling stock is composed of several cars. In order to operate in combination, it is necessary to connect the device, called coupler, between the rolling stocks. When the collision occurs between cars, couplers should be able to absorb the shock. Urban railway has used only rubber absorbers. But recently, the hydraulic buffer has been considered in general railway. In order to know the performance of the buffer it should be conducted to experiments. But whenever this combination change, we should experiments to know a lot of the dynamic behavior of each coupler. These experiments are generally replaced by the simulation, since a lot of time and cost consuming. The quasi-static map of hydraulic buffer obtained by the experiments is required for the simulation. However, the experiments for obtaining such a quasi-static map is costly and time consuming. In this paper, it proposes a method for deriving the quasi-static map of hydraulic buffer from the theoretical model.