• 제목/요약/키워드: experimental techniques

검색결과 3,187건 처리시간 0.035초

토양내(土壤內) 카드뮴 아연(亞鉛) 및 구리의 행동(行動)에 관한 연구(硏究) -II. 토양내(土壤內) 카드뮴 아연(亞鉛) 및 구리의 이동(移動)에 미치는 유기물처리(有機物處理)의 영향(影響)- (Behavior of Cadmium, Zinc, and Copper in Soils -II. Effect of Organic Matter Treatment on Mobility of Cadmium, Zinc, and Copper in Soils-)

  • 유순호;현해남
    • Applied Biological Chemistry
    • /
    • 제28권2호
    • /
    • pp.76-81
    • /
    • 1985
  • 유기물처리(有機物處理)가 토양내(土壤內) 카드뮴, 아연(亞鉛) 및 구리의 이동(移動)에 미치는 영향을 밝히기 위해 혼성치환실험기술(混成置換實驗技術)을 이용(利用)하여 실내실험(室內實驗)으로 수행하였고, I보(I報)에서 검토(檢討)한 흡착실험(吸着實驗)의 결과(結果)와 비교(比較)하고자 하였다. 공시토양(供試土壤) 및 유기물처리(有機物處理) 수준(水準)은 I보(報)와 동일하게 하였다. 공시토양중(供試土壤中) pH, 유기물함량(有機物含量) 및 양(湯)이온치환용량(置換容量)이 가장 낮은 본양토(本良土) 토주(士柱)에서 중금속(重金屬)의 이동속도(移動速度)가 가장 빨랐는데, 카드뮴과 아연(亞鉛)은 $1{\sim}7pore\;volume$에서, 구리는 $5{\sim}15pore\;volume$에서 대부분 출현(出現)하였다. 교래토(橋來土) 토주(土柱)에서 카드뮴과 아연(亞鉛)의 이동양상(移動樣相)은 본양토(本良土)와 비슷하였으나 구리의 이동속도(移動速度)는 대단히 늦어 30pore volume을 흘려보내는 동안 출현(出現)하지 않았다. pH가 가장 높고 유기물함량(有機物含量)과 양(湯)이온치환용량(置換容量)이 중간인 강서토(江西土)에서 중금속(重金屬)의 이동속도(移動速度)가 가장 느렸다. 본양토(本良土)와 강서토(江西土)에서 중금속간(重金屬間) 이동순서(移動順序)는 Cd>Zn>Cu이었으며, 교래토(橋來土)에서는 Zn>Cd>Cu이었다. 3% 퇴비(推肥) 처리(處理)한 본양토(本良土) 토주(土柱)에서 카드뮴은 5pore volume에서, 아연(亞鉛)은 20pore volume에서 소량(少量) 출현(出現)하였으나, 구리는 출현(出現)하지 않았다. 7% 퇴비(推肥) 처리(處理) 시(時) 20pore volume에서 소량(少量)의 카드뮴이 출현(出現)하여 퇴비(堆肥) 처리량(處理量)이 증가(增加)할수록 이동속도(移動速度)는 급격히 감소(減少)하였다. 또한 이 효과(效果)는 석회(石灰)의 효과(效果)와 동시에 나타났음을 확인하였다. Humic acid 처리 시(處理 時) 구리의 이동속도(移動速度)는 약간 감소(減少)하였으나, 카드뮴과 아연(亞鉛)의 이동(移動)에는 영향을 주지 못하였다. 전보(前報)의 흡착실험(吸着實驗)의 결과(結果)와 비교(比較)하였을 때 최대흡착량(最大吸着量)이 증가(增加)할수록 이동속도(移動速度)는 느렸다.

  • PDF

온톨로지 기반의 수강지도 시스템 (Ontology-based Course Mentoring System)

  • 오경진;윤의녕;조근식
    • 지능정보연구
    • /
    • 제20권2호
    • /
    • pp.149-162
    • /
    • 2014
  • 수강지도는 학생의 졸업인증이나 공학교육인증 이수를 위해 수강 신청 이전에 수행되는 과정을 지칭한다. 수강지도는 학생의 수강이력 점검과 향후 수강 과목의 안내 등을 포함하여 학생들의 졸업 및 교과과정 인증과 관련된 중요한 역할을 하고 있다. 현재 대부분 대학에서는 수강지도를 위한 전산시스템의 부재로 인해 지도교수가 직접 수동적으로 수강지도를 진행하고 있다. 하지만 이러한 수동적인 방식의 수강지도는 지도교수가 각 학생에 대한 정보를 분석해야 하고, 때때로 휴먼에러를 일으키게 된다. 수강신청이 학기 단위로 이루어지기 때문에 휴먼에러로부터 발생된 피해는 원상태로 되돌리는 것이 거의 불가능하다. 따라서 수강지도를 진행함에 있어 자동화된 시스템은 필수적인 요소로 판단된다. 관계 데이터 모델을 이용한 수강지도 시스템의 도입은 수동적인 수강지도의 문제점을 해결할 수 있게 해준다. 하지만 교육과정 및 인증제도의 변화에 따라 기존 시스템의 스키마 변경이 요구되고, 수강 과목 사이에 존재하는 관계 및 의미적인 검색을 제공하는 것이 어렵다는 한계가 존재한다. 본 논문에서는 수강지도 시스템을 위한 수강지도 온톨로지를 모델링하고, 온톨로지 기반의 수강지도 시스템을 설계한다. 온톨로지 인스턴스 생성을 위해 JENA 프레임워크를 이용하여 온톨로지 생성 모듈을 개발하였고, 실험에 참가한 학생의 수강 이력 데이터를 기반으로 온톨로지 인스턴스를 생성하고 추론과정을 통해 트리플 저장소에 저장하였다. 실험은 제안하는 시스템이 학생들이 향후 수강할 수 있는 과목을 모두 제공하는지 여부와 제공되는 과목에 대한 정보 및 학점 계산들이 정확한 지를 측정하였다. 실제 학생의 수강내역을 이용한 실험의 결과는 온톨로지 기반의 수강지도 시스템이 현 수강지도 시스템의 수동적 방법을 해결하고, 사람이 지도한 내용과 같은 내용을 도출하는 것을 확인함으로써 제안하는 시스템의 유효성을 보여준다.

공진 주파수 분석법에 의한 임플랜트의 안정성 측정에 관한 연구 (A STUDY ON THE MEASUREMENT OF THE IMPLANT STABILITY USING RESONANCE FREQUENCY ANALYSIS)

  • 박철;임주환;조인호;임헌송
    • 대한치과보철학회지
    • /
    • 제41권2호
    • /
    • pp.182-206
    • /
    • 2003
  • Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

Minilaparotomy 불임술(不妊術)과 복강경불임술(腹腔鏡不妊術)에 관(關)한 비교연구(比較硏究) (A Comparison of Minilaparotomy and Laparoscopic Sterilization)

  • 배병주
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제4권1호
    • /
    • pp.17-25
    • /
    • 1977
  • Anderson(1937), Power and Barnes(1941) reported a study concerning a method of tubal sterilization in association with peritoneoscopy or laparoscopy in which they cauterized the tubes. There appears to have been a hiatus of interest in sterilization (cold or hot) associated with laparoscopy until reintroduction by Palmer(1963), Frangenheim(1964) and Steptoe(1967). On the other hand, for interval female sterilization, however, minilaparotomy is relatively new. By Saunder and Munsick(1972), John Lyle(1974), Frank Stubb(1974), Vitoon(1973) and B.C. Bai(1975), their own technique for interval female sterilization requires 2.0 to 2.5cm, incision at the margin of the mons pubis. In Korea, female sterilization by means of minilaparotomy firstly reported by B.C. Bai using Bai's uterine elevator, of his own device, early in 1975. Recently inteval female sterilization by laparoscopy and minilaparotomy are widely accepted throughout the world especially in Asian countries. Minilaparotomy is carried out from 1974, laparoscopic sterilization from 1976, and in this study each of 250 cases of those were analysed and discussed for the comparison at Seoul Red Cross Hospital. (1) In the age distribution, numerous clients were in their age of $31{\sim}35$ in laparoscopy as well as minilaparotomy. Average 33.7 years in L and 33.2 years in M. (M=minilaparotomy, L=laparoscopic sterilization) (2) As regarding living children, women having 3 children represented the greatest number, 113 cases out of 250 in M group and 102 cases out of 250 in L group. Average No. of child are 2.9 in Land 3.1 in M. (3) Concidering the operation day in the menstrml cycle, the greatest number of cases, those who underwent tubal sterilization during the days of $26{\sim}$, next during the $6{\sim}10$ days of the cycle in both group. (4) Concidering the operation time, 188 cases by laparoscopy were performed in $6{\sim}10$ minutes, 33 cases within 5 minutes and 24 cases in $11{\sim}15$ minutes. Maximum 50 minutes, minimum 4 minutes and average 8.3 minutes. The majority of cases (154 cases) by minilaparotomy required $6{\sim}10$ minutes and 67 cases $11{\sim}15$ minutes, 6 cases within 5 minutes. Maximum 30 minutes, minimum 4 minutes and average 10.4, minutes. In both groups, most of the reasons for the extra length were surgical difficulties such as thick abdominal wall, pelvic adhesion, less cooperation of patients in early period of this study. (5) Hospital stay after operation in L group required $3{\sim}4$ hours in 125 cases, $2{\sim}3$ hours in 41 cases, $4{\sim}5$ hours in 32 cases out of 250. Maximum 8 hours, minimum 1 hour and average 3.8 hours. In M group hospital stay required $6{\sim}7$ hours in 100 cases, over 7 hours in 85 cases, $5{\sim}6$ hours in 46 cases and so on. Maximum 14 hours, minimum 2 hours and average 6.5 hours. (6) The time between operation and gas passing in the majority cases of both groups, were $12{\sim}36$ hours. A veragetime 20.3 hours in L and 27.2 in M. (7) Laparoscopic sterilization coincident with induced abortion were carried out in 27 cases, laparoscopy with minilaparotomy to control for mesosalpingeal hemorrhage in 1 case. Minilaparotomy coincident with induced abortion were performed in 65 cases, D and C whit polypectomy, menstrual regulatian, and remaval of IUD in 1 case respectively. (8) In L group, 1 case of mesosalpingeal hemorrhage, 1 case of abdominal wall infection were complicated during operation. In M group, 1 case of uterine perfaration, 1 case of abdominal wall infection, 1 case of hemorrhage from omentum and 1 case of bloody vaginal discharge were complicated. No intensive medical treatment was required for those minor complications in both groups. (9) No failure has been recognized and these two sterilization techniques might be the simple, safe and the most effective method for permanent contraception at present time. There is no significant clinical defference between L and M group in this study.

  • PDF

데이터마이닝 기법을 활용한 대학수학능력시험 영어영역 정답률 예측 및 주요 요인 분석 (Prediction of Correct Answer Rate and Identification of Significant Factors for CSAT English Test Based on Data Mining Techniques)

  • 박희진;장경애;이윤호;김우제;강필성
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제4권11호
    • /
    • pp.509-520
    • /
    • 2015
  • 대학수학능력시험(수능)은 고등학교 3년간의 학업 성취도를 측정하는 대표적인 평가 도구로서 대한민국 대학 입시에 있어 매우 중요한 역할을 하는 시험이다. 응시생들의 학업 성취도를 효과적으로 평가하기 위해서는 수능의 난이도가 적절하게 조절되어야 하나 지금까지는 수능 난이도의 편차가 매우 크게 나타나 매 입시연도마다 여러 가지 문제점을 야기해왔다. 본 연구에서는 전문가의 판단에 의존한 기존 방식에서 벗어나 지금까지 시행된 모의고사 및 실제 시험을 통해 축적된 자료를 바탕으로 데이터마이닝 기법을 적용하여 영어영역 문제의 난이도를 예측하는 모델을 구축하고 난이도 예측에 영향을 미치는 요소를 판별하고자 한다. 이를 위해 각 문항의 특성을 판별할 수 있는 여러 지표와 함께 지문, 문제, 답안 등에 나타난 단어들의 특징을 토픽 모델링(topic modeling) 기법을 이용하여 정량화하고 이를 바탕으로 선형회귀분석 및 의사결정나무 기법을 이용하여 각 문항의 난이도를 예측하는 모델을 구축하였다. 구축된 예측 모델을 실제 문제에 적용한 결과 난이도의 상/하 구분에 대한 예측 정확도는 90% 수준으로 나타났으며, 실제 정답률 대비 오차 비율은 약 16% 이내인 것으로 나타났다. 또한 배점 및 문제 유형이 문제의 난이도에 큰 영향을 미치며 지문이 특정 주제에 관련된 경우에도 난이도에 영향을 미치는 것을 확인하였다. 본 연구에서 제시된 방법론을 이용하여 영어영역 각 문제들에 대한 기대 정답률의 범위를 추정할 수 있으며 이를 종합하여 영어영역 전체 문제에 대한 정답률 예측을 통해 적절한 난이도의 문제를 출제하는 데 기여할 수 있을 것으로 기대한다.

H.264|MPEG-4 AVC 비디오 부호화에서 움직임 벡터 정보와 16~16 및 4X4 화면 내 예측 최종 모드간 통계적 연관성을 이용한 화면 간 프레임에서의 4X4 화면 내 예측 고속화 방법 (A Fast 4X4 Intra Prediction Method using Motion Vector Information and Statistical Mode Correlation between 16X16 and 4X4 Intra Prediction In H.264|MPEG-4 AVC)

  • 나태영;정윤식;김문철;함상진;박창섭;박근수
    • 방송공학회논문지
    • /
    • 제13권2호
    • /
    • pp.200-213
    • /
    • 2008
  • H.264|MPEG-4 AVC는 ITU-T와 ISO/IEC 공동으로 결성된 JVT (Joint Video Team)에 의해서 정의된 가장 최신의 영상 압축 표준이다. H.264|MPE6-4 AVC는 효율적 부호화를 위하여 여러 방법이 제안되었는데, 화면 간 프레임(P-frame)에서의 화면 내 예측(Intra Prediction)의 경우 매크로블록마다 후보 모드 결정 및 율-왜곡 비용 계산에 따른 부호화 시간의 급격한 증가를 초래하여 고속화 방법의 필요성이 대두되고 있다 본 논문에서는 $16{\times}16$$4{\times}4$ 화면 내 예측 부호화 결과를 바탕으로, 두 예측 결과의 통계적 상관관계를 규정한 후, 이를 활용한 $4{\times}4$ 화면 내 예측의 후보 모드 수를 감소시키는 방법을 제안한다. 구체적으로는 화면 간 예측(Inter Prediction) 단계에서 결정된 움직임 벡터 정보를 이용하여 현재 매크로블록의 화면 내 예측이 필요한지를 미리 판정한 후, 매 화면 내 프레임(I-frame)의 $16{\times}16$ 화면 내 예측의 최종 후보 모드에 따른 $4{\times}4$ 화면 내 예측의 최종 결정 모드들의 발생분포를 누적 확률 순으로 배열하여 특정 누적 확률에 도달하기까지 만의 후보 모드들만을 예측에 포함하는 참조 테이블을 부호화 과정 중에 생성한 후 동일 GOP 내에 위치하는 모든 화면 간 프레임의 화면 내 예측 시 활용하게 된다. 제안하는 방법은 H.264|MPEG-4 AVC의 참조 소프트웨어인 JM11.0을 사용하여 실험하였으며, 총 부호화 시간을 최대 51.24% 감소시킬 수 있었으며 PSNR 감소와 비트율 증가는 무시할 정도의 작은 변화만 있었다.

대화식 데이터 마이닝 기법을 활용한 자동차 보험사의 인입 콜량 예측 사례 (A Case Study on Forecasting Inbound Calls of Motor Insurance Company Using Interactive Data Mining Technique)

  • 백웅;김남규
    • 지능정보연구
    • /
    • 제16권3호
    • /
    • pp.99-120
    • /
    • 2010
  • 최근 고객들의 비대면 접점 서비스 이용도가 높아짐에 따라, 비대면 채널은 다양한 데이터의 분석을 통해 고객 만족도를 향상시킬 수 있는 유용한 창구로 인식되고 있다. 이러한 비대면 채널의 대표적 영역으로 콜센터를 들 수 있으며, 콜센터 운영에서 고객 만족도에 가장 큰 영향을 미치는 요소는 상담 인력의 규모인 것으로 알려져 있다. 즉, 일정수준 이상의 고객 만족도를 유지하기 위해서는 충분한 상담 인력을 확보하는 것이 관건이지만, 불필요하게 많은 인력을 확보하는 것은 인건비 측면에서 비용의 낭비를 초래할 수 있다. 따라서 부족하지도 않고 넘치지도 않을 정도의 적정 인력을 산출하는 능력은 콜센터 운영의 핵심 경쟁력으로 인식되고 있으며, 최근 콜센터에서는 적정 인력의 규모를 예측하기 위해 WFM(Work Force Management) 업무 전담 부서를 설치하고 콜량을 정확하게 예측하기 위한 노력을 기울이고 있다. 콜량 예측을 위해 현업에서 주로 사용되는 방법은 담당자의 직관에 의존하는 방법으로, 일정기간의 콜량 평균을 담당자가 주관적 판단에 의해 보정함으로써 이루어진다. 하지만 이러한 방식은 담당자의 주관적 성향에 크게 좌우된다는 한계를 갖고 있어서, 최근에는 다양한 예측 모형을 시스템화한 WFMS(Workforce Management System) 패키지가 널리 활용되고 있다. 하지만 이 시스템은 초기 도입 시 매우 고가의 구축비용이 발생하며, 신규 요인 발굴 시 이를 즉각적으로 시스템에 반영하기 어렵다는 한계점을 갖고 있다. 이를 극복하기 위해 본 연구에서는 데이터 마이닝의 대화식 의사결정나무 기법을 이용함으로써, 객관적이면서도 업무 배경 지식을 충분히 활용할 수 있는 예측 모형을 수립하고자 한다. 또한, 본 연구에서 수립한 모형의 정확성 평가를 위해, 국내 최대 규모의 한 자동차 보험사 콜센터의 4년 8개월 간의 실 데이터를 사용한 실험을 수행하고 그 결과를 제시하였다. 실험에서는 기존의 WFMS와 본 연구에서 제안하는 두 가지 모형인 대화식 의사결정나무 기반의 예측 모형, 일반 의사결정나무 기반의 예측 모형의 세 가지 모형에 대해, 다양한 오차 허용범위 하에서의 사고콜 및 고장콜에 대한 예측 적중률을 평가하였다.

조생종 '한아름' 배 모의유통 전 예건처리 온도가 품질에 미치는 영향 (Effect of Temperature Pre-conditioning on Fruit Quality of Early-season 'Hanareum' Pears (Pyrus pyrifolia Nakai) during Simulated Marketing)

  • 이욱용;오광석;황용수;임병선;안영직;천종필
    • 원예과학기술지
    • /
    • 제34권1호
    • /
    • pp.94-101
    • /
    • 2016
  • 본 연구에서는 수확 후 예건처리를 통해 '한아름' 배 과실의 상온유통 중 품질 유지를 위한 수확관리 기술을 정립하기 위해 실시하였다. 과실은 만개 후 103일과 110일에 각각 수확하여 세 그룹의 처리 온도(21, 25, $29^{\circ}C$)에서 4일간 예건처리를 실시하였다. 과실의 감모율은 수확시기에 관계없이 예건온도가 낮을수록 낮은 경향을 나타내었다. 과실의 경도는 상온 유통기간이 증가함에 따라 모든 처리에서 경도가 감소하는 경향을 보였고 두 수확시기 모두 $21^{\circ}C$ 처리구가 경도유지에 가장 효과적인 것으로 나타났다. 또한 $21^{\circ}C$에서 예건한 경우, 상온유통 중 외관 품질이 높게 유지되었고 분질장해 등 생리장해의 발생은 낮게 조사되었다. 상온유통 중 에틸렌 발생량은 조기수확과 및 적숙과 모두 비슷한 수준을 보였고 두 수확시기 모두 예건온도가 $21^{\circ}C$인 경우가 25 및 $29^{\circ}C$에 비해 에틸렌 발생량이 적은 것으로 나타났다. 과실의 호흡량은 예건처리 기간 중에는 온도가 높을수록 호흡률이 높아 $29^{\circ}C$ 처리는 $21^{\circ}C$ 처리에 비해 호흡률이 2배 이상 높았고 조기수확과에 비해 적숙과가 호흡률이 높은 것으로 나타났는데 상온 유통기간 중에는 큰 차이를 보이지 않았다. 이상의 결과를 종합하면 한여름에 수확되는 조생종 '한아름' 배에 있어 수확 후 $21^{\circ}C$ 예건처리는 상온유통 중 과실의 품질 유지를 위한 바람직한 수확 후 처리방법의 하나로 추천할 수 있을 것으로 판단되었다.

한국산(韓國産)의 죽류(竹類)에 관(關)한 연구(硏究)(제(第)10보(報)) - Phyllostachys reticulata의 굴곡시험(屈曲侍險)에 대(對)하여 - (Research on the Bamboo in Korea(Part 10) - On the Bending Test of Phyllostachys reticulata)

  • 정현배
    • 한국산림과학회지
    • /
    • 제6권1호
    • /
    • pp.27-31
    • /
    • 1967
  • 죽류(竹類)는 원래(原來) 죽간(竹幹)이 곧게 자라는 식물(植物)이므로 현재(現在)까지는 이와같이 곧게 자라는 성질(性質)을 이용(利用)하여 다각도(多角度)로 사용(使用)하여 왔으나 근일(近日) 죽공예품제작(竹工藝品製作)의 추세(趨勢)는 굴곡(屈曲)된 죽간(竹幹)의 필요성(必要性)이 증가(增加)됨에 따라 저자(著者)는 한국(韓國) 산죽류(産竹類)의 굴곡생장(屈曲生長)에 관(關)한 시험(試驗)을 행(行)하고저 강원도(江原道) 명주군(溟州郡)부터 옥준면(玉浚面) 현내리(縣內里)의 시험림(試驗林)에서 1960년(年) 시험(試驗)을 시행(施行)하였다. 죽순(竹筍)이 40여일(餘日) 간(間)에 완전성장(完全成長)하는 비밀(秘密)이 주(主)로 지하경(地下莖)에 있다고 하나 죽순(竹筍)의 죽피(竹皮)에도 그 요인(要因)이 있을 것이라고 생각(生覺)하고 죽피(竹皮)의 탈피(脫皮)와 죽(竹)의 굴곡(屈曲)에 대(對)한 시험(試驗)을 다음과 같이 행(行)하였다. 1. 탈피(脫皮)의 시기(時期) 2. 임의순곡(任意筍曲)을 위(爲)한 죽피(竹皮)의 탈피방향(脫皮方向) 3. 죽순(竹筍)의 크기(생장(生長))에 따르는 굴곡(屈曲)의 정확성(正確性) 이상(以上)과 같은 시험(試驗)으로 다음과 같은 결과(結果)를 얻었다. 1. 본시험지(本試驗地)에서는 죽순(竹筍)의 발순(發筍)이 대개(大槪) 4월경(月頃)부터 시작(始作)되나 시간별(時期別)로의 굴곡(屈曲)의 난역(難易)을 관찰(觀察)한 결과(結果)는 이 굴곡(屈曲)의 효율(效率)이 68%로서 가장 좋은 성적(成積)을 나타 냈다. 2. 출도(出度)를 임의(任意)로 하고져 할 때에는 구부리고져 하는 방향(方向)의 죽피(竹皮)를 탈피(脫皮)하면 그 방향(方向)으로 구부러지며 90도(度)의 각도(角度)까지 굴곡(屈曲)될 수 있음을 알았다. 단(但) 돌레 전체(全體)를 베끼면 자유형(自由形)으로 구부러 진다. 3. 어느 정도(程度) 생장(生長) 죽순(竹筍)이 굴곡도(屈曲度)가 정확(正確)한가를 알기 위(爲)하여 30cm부터 10cm의 간격(間隔)을 두고 150cm까지의 길이에 대(對)하여 죽순(竹筍)을 탈피시험(脫皮試驗)해 본 결과(結果) 110cm 크기의 것이 90%로서 좋은 성적(成積)을 나타내고 있음을 알수 있었다.

  • PDF

남성 불임증 환자에 대한 Clomiphene의 효과 (Clomiphene Citrate on Male Infertility)

  • 이강현;이희영
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제8권2호
    • /
    • pp.45-55
    • /
    • 1981
  • Clomiphene citrate. antiestrogen, was given to 39 infertile males whose spermatogenesis were disturbed and the efficacy of the drug was evaluated at the Department of Urology in 1980. (Table 1). Patients were divided into 3 clinical observation groups such as group I composed of 19 cases of idiopathic azoospermia, group II consisted of 15 cases of oligospermia following the vasovasostomy, and group III comprised 5 cases of testicular azoospermia. (Table 2). Clinical characteristics of these patients were as follows: Age of the patients ranged from 26 to 43 years old with mean of 34, and that of their wives ranged from 24 to 41 years old with mean of 31. Duration of marital life ranged from 1 to 21 years with mean of 5 years. Sizes of testis ranged from 6 to 25 ml with mean of 16 ml. Coital frequency ranged from 0.5 to 6 per week with mean of 2.4 per week. Levels of plasma FSH ranged from 3.15 to 23.06 lU/1 with mean of 8.15 lU/1, those of LH ranged from 2.98 to 19.89 lU/1 with mean of 8.18 lU/1 and those of testosterone ranged from 3.09 to 9.97 ng/ml with mean of 6.48 ng/ml. (Table 3). Clomiphene citrate was given in dosage of 50 mg per day (in d.) orally to 31 patients for 3 to 9 months and in dosage of 100 mg per day (b.i.d.) orally to 8 patients for 3 to 9 months. (Table 8). Semen samples were analysed monthly on each patient by routine analysis techniques. For the assessment of the efficacy of Clomiphene citrate on faulty spermatogenesis following empirical criteria were used: For semen quality: Improvement (I) represents that semen parameter increased more than 25% from basal level after the treatment, Unchange (U) expresses that semen parameter increased less than 25% of basal level or not changed after the treatment and Deterioration (D) means that semen parameter decreased from basal level after the treatment. For fertility unit (total counts ${\times}$ motility ${\times}$ morphology ${\div}10^6$): Improvement (I) represents that fertility unit increased more than 10 units after the treatment, Unchange (U) expresses that fertility unit increased less than 10 units or not changed after the treatment, and Deterioration (D) means that fertility unit decreased after the treatment. (Table 4). Results obtained from the Clomiphene therapy were as follows: Changes of spermiograme before and after the Oomiphene therapy shown in the Table 5. Sperm counts increased from 23 to 31 ${\times}10^6$/ml in group I, from 17 to 29 ${\times}10^6$/ml in group II. Other parameters of spermiogramme were not changed significantly after the treatment. Fertility units increased from 14 to 18 units after the treatment in group I, and from 16 to 18 units after the treatment in group II. Effectiveness of Clomiphene citrate on spermatogenesis was summarised in the Tables 6 and 7. After the treatment, sperm count increased in 11 patients, motility increased in 6 patients, morphology increased in 4 patients and fertility units increased in 9 patients. No sperm could be produced by Clomiphene citrate in group III of testicular azoospermia. Dosage of 50 mg of Clomiphene citrate per day for 3 to 6 months was proved to be the most effective in the present series. (Table 8). Pregnancy occurred in 2 patients after the treatment. No particular side effects were noted by the treatment. Pharmacologic compounds used for male infertility were shown in the Table 9. Reported results of Clomiphene citrate were shown in the Table 10.

  • PDF