• 한국태양에너지학회 논문집
• /
• 제40권5호
• /
• pp.23-34
• /
• 2020

Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.

• 정보처리학회논문지A
• /
• 제13A권3호
• /
• pp.231-240
• /
• 2006

본 논문에서는 무선 인터넷 프록시 서버 클러스터를 사용하여 무선 인터넷의 문제와 요구들을 캐싱(Caching), 압축(Distillation) 및 클러스터(Clustering)를 통하여 해결하려고 한다. TranSend는 클러스터링 기반의 무선 인터넷 프록시 서버로 제안된 것이나 시스템적인(Systematic) 방법으로 확장성을 보장하지 못하고 모듈간의 불필요한 통신구조로 인해 복잡하다는 단점을 가진다. 본 연구자들은 기존 연구에서 시스템적인 방법으로 확장성을 보장하는 CD-A라는 구조를 제안하였으나 이 역시 모듈간의 부분적으로 불필요한 통신 구조를 가진다는 단점을 가지고 있다. 이에 본 논문에서는 시스템적인 확장성과 단순한 구조를 가지는 클러스터링 기반의 통합형 무선 인터넷 프록시 서버를 제안한다. 16대의 컴퓨터를 사용하여 실험을 수행하였고 실험 결과 TranSend 시스템과 CD-A 시스템에 비해 각각 196%, 40%의 성능 향상을 보였다.

• 한국태양에너지학회 논문집
• /
• 제33권3호
• /
• pp.58-66
• /
• 2013

Recently, PV module that the most important part of the photovoltaic system is more widened to lower manufacturing costs for module. However, the broad PV module results to the serious mechanical damage corning from installation circumstances such as snow, wind etc of snow and finally lead to the dramatic degradation of the electrical behavior of PV module. In this paper, 3 kinds of PV modules that consist of the different thickness and area of front glass and the diverse cross sectional structures of the frame are prepared for this experiment. The drooped length and electrical outputs of the PV modules are measured by means of applying 600Pa mechanical load to the PV modules from 1200Pa to 5400Pa base on the mechanical load test procedure of K SC IEG 61215 standard. The simulation data are obtained by the simulation tool as ANSYS and those are validate by comparing with the those experimental results figure out relations between the deformation and the constituent part of PV module.

• 한국과학교육학회지
• /
• 제26권4호
• /
• pp.537-545
• /
• 2006

이 연구에서는 문제해결형 탐구 실험 모듈을 과학 탐구반 중학생 대상으로 적용하였고 모듈 적용시 SWH(Science Writing Heuristic)를 활용하였다. 충북 청주시 소재 C중학교 과학탐구반 학생 23명 대상으로 전 일제 계발활동 18차시에 걸쳐 완성된 6개 모듈을 적용하였다. 문제해결형 탐구 실험 모듈은 실험 과정 중에 문제 상황이 발생하도록 구성되어 있는데, 이 때 SWH 파란색 카드와 SWH 초록색 카드를 작성함으로써 학생들에게 충분히 사고할 수 있는 기회를 제공하는 전략을 활용하여 적용하였다. 먼저 SWH 파란색 카드의 작성을 통해 미리 개별적으로 문제 해결 방안을 제안하는 기회를 갖고, SWH 초록색 카드를 작성 하면서 모둠 구성원들과의 토의하고 실험을 통해 결정한 문제 해결 방안을 직접 수행하게 된다. 문제 상황에서 SWH의 활용에 따른 적용 효과를 비교하기 위하여 탐구 활동과정을 관찰하면서 수집 한 활동 설문, SWH 사후 설문을 분석하였다. 그 결과, SWH 활용이 실험 과정에서의 학생들의 문제 인식에 긍정적인 영향을 미친 것으로 나타났고, 문제 상황에서의 SWH 활용 효과에 대한 학생들의 인식도 긍정적으로 나타났다.

• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.67-75
• /
• 2005

A high efficiency ZVS PWM asymmetrical half bridge converter for a plasma display panel (PDP) sustaining power modules is proposed in this paper. To achieve the ZVS of power switches for the wide load range, a small additional inductor L/sub 1kg/, which also acts as an output filter inductor, is serially inserted into the transformer's primary side. At that point, to solve the problem of ringing in the secondary rectifier caused by L/sub 1kg/, the proposed circuit employs a structure without the output filter inductor, which helps the voltages across rectifier diodes to be clamped at the output voltage. Therefore, no dissipative RC (resistor capacitor) snubber for rectifier diodes is needed and a high efficiency as well as low noise output voltage can be realized. In addition, since it has no large output inductor filter, the asymmetrical half bridge converter features a simpler structure, lower cost, less mass, and lighter weight. In addition, since all energy stored in L/sub 1kg/ is transferred to the output side, the circulating energy problem can be effectively solved. The operational principle, theoretical analysis, and design considerations are presented. To confirm the operation, validity, and features of the proposed circuit, experimental results from a 425W, 385Vdc/170Vdc prototype are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권10호
• /
• pp.2527-2543
• /
• 2013

A novel steganographic QR code algorithm, which not only coveys the secret into the widely-used QR barcode but also preserves the readability of QR content and the capability of error correction, is presented in this article. Different from the conventional applications for QR barcode, the designed algorithm conceals the secret into the QR modules directly by exploiting the error correction capability. General browsers can read the QR content from the QR code via barcode readers; however, only the authorized receiver can further reveal the secret from the QR code directly. The new mechanism can convey a larger secret payload along with adjustment of the QR version and error correction level. Moreover, the blind property allows the receiver to reveal the secret without the knowledge of the embedded position of modules. Experimental results demonstrate that the new algorithm is secure, efficient and feasible for the low-power QR readers and mobile devices.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2409-2414
• /
• 2002

The surfaces of prototypes become rough due to the stair-stepping which is the inevitable phenomenon in the Rapid Prototypes are not used only for the verification of feature. The grinding, coating, or the composition of them is a main operation in post-processing in which lots of costs and long build time are needed. The solution is proposed to increase the efficiency of rapid prototyping by minimizing or removing the composition of them is a main operation in post-processing in which lots of costs and long build time are needed. the solution is proposed to increase the efficiency of rapid prototyping by minimizing or removing the regions for post-processing. the factors to cause the surface roughness and their effects are analyzed through the experiments. Software modules are developed to predict the surface roughness of each face in the prototyping with the result. An experimental compensation method is developed to apply the modules to various RP equipments, materials and build styles. The build direction is searched with use of genetic algorithm to maximize the total areas of the surface of which roughness is better than the user-defined value.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.744-748
• /
• 2000

The characteristics of $CO_2$ exchange between plant and human modules, absorption rate of NO$_2$, and growth of lettuce were examined in an urban-type plant factory(UPF). With 150 lettuce plants, $CO_2$ concentrations of plant module were 600 ~ 700$\mu$mol mol$^{-1}$ at average leaf weight of 130g.plant$^{-1}$ and 900~1100$\mu$mol.mol$^{-1}$ at 75g.plant$^{-1}$ for one and two persons' stay in the human module, respectively. When the air of 0.13, 0.30 and 0.45 $\mu$molㆍmol$^{-1}$ NO$_2$ in a human module was circulated ON/OFF 10/20min between the human and plant modules, $NO_2$ decrement in the chamber during 10 min was 0.040, 0.109, and 0.149 $\mu$mol, respectively. The lettuces grown at 0.45 $\mu$molㆍmol$^{-1}$ $NO_2$ during experimental period showed no significant differences in growth factors such as leaf width, leaf length, leaf area and fresh weigh, and in the quality between treated and control.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.460-463
• /
• 2008

A large part of the overall industrial energy is dissipated as waste heat despite of much development in the utilization of thermal energy. A mean efficiency is reported to be only around 30 to 35%. The existing waste heat recovery technology has reached its limit and consequently, the development of a new technology is necessary. Improving efficiency using thermoelectric technology has recently come into the spotlight because of its unique way to recover thermal energy. In fact, thermoelectric generator directly converts thermal energy into electric energy by a solid state without any moving parts. Futhermore remarkable improvement in the thermoelectric energy conversion efficiency has been achieved. In this study, a thermoelectric generator was made using commercialized thermoelectric modules. With thermoelectric modules attached on a duct surface, hot air was blown into the duct using a hot air blower. On the other side of the module, a water jacket was attached to cool the module. With different air inlet temperatures and water flowrates, the electrical power of the thermoelectric generator was measured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1115-1119
• /
• 2005

The paper proposes the elastic modulus evaluation technique of a cantilever beam by vibration analysis based on time-average electronic speckle pattern interferometry (TA-ESPI) with non-contact and nondestructive and Euler-Bernoulli equation. General approaches for the measurement of elastic modulus of thin film are Nano indentation test, Bulge test and Micro-tensile test and so on. They each have strength and weakness in the preparation of test specimen and the analysis of experimental result. ESPI has been developed as a common measurement method for vibration mode visualization and surface displacement. Whole-field vibration mode shape (surface displacement distribution) at a resonance frequency can be visualized by ESPI. And the maximum surface displacement distribution from ESPI is a clue to find the resonance frequency at each vibration mode shape. And the elastic modules of test material can be easily estimated from the measured resonance frequency and Euler-Bernoulli equation. The TA-ESPI vibration analysis technique is able to give the elastic modulus of materials through the simple processing of preparation and analysis.