• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.377-389
• /
• 2017

Tests of the lateral and torsional stability are quite sensitive to the experimental conditions, such as support conditions and loading system. Controlling all of these conditions in a full-size test is a very challenging task. Therefore, in this paper, an experimental measurement method that can control the experimental conditions using a small-scale model was proposed to evaluate the lateral and torsional stability of beams. For this, a loading system was provided to maintain the vertical direction of the load applied to the beam, and a support frame was produced to satisfy the in-plane and out-of-plane support conditions. The experimental method using a small-scale model was applied successively to the lateral and torsional behavior and stability of I-shaped beams. The proposed experimental methods, which effectively accommodate the changes in the geometry and length of the beam, could contribute to further experimental studies regarding the lateral and torsional stability of flexural members.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.153-160
• /
• 2009

In the research-oriented university there are various laboratories in the departments according to a major field of study. Under these circumstances the budget to purchase experimental facilities has only to be distributed among research teams and then is spent within the confines of it without rein. However, in case of college the budget for experimental facilities needs to be considered other allocation methods because of no laboratory being managed by professor. In this paper the methodology for the rational selection of experimental facilities for college is proposed. It is composed of the following ; (1) the rational allocation method of the budget for experimental facilities in consideration of the characteristics of individual departments, and (2) the evaluation and selection of the alternative experimental facilities submitting in each department. To decide rationally importance of estimation index for the determination of budget and equipment is applied the Analytic Hierarchy Process(AHP) technique. First the proposed methods are presented and then discussed with simulation results.

• Journal of the Korean earth science society
• /
• v.21 no.6
• /
• pp.647-654
• /
• 2000

The purpose of this study is to investigate the types of concepts about atmospheric pressure of middle school students and to design a new method to improve students' understandings on atmospheric pressure. The second grade students of the middle school has been selected and examined their pre-concepts on atmospheric pressure through questionnaires and interviews. Two groups of students have been taught using the second grade science textbooks and experimental methods designed from this study, respectively. The results suggest that we need to develope various teaching methods that can improve alternative concept as well as experimental tools that can help students understand difficult scientific concepts. The reason is that once alternative concept is occupied, it is extremely difficult to fix it. In addition, the proposed experimental methods are effective in establishing the concept and understanding on atmospheric pressure.

• The korean journal of orthodontics
• /
• v.42 no.3
• /
• pp.118-128
• /
• 2012

Objective: The aim of this study was to investigate and compare the in vivo effects of prostaglandin E2 (PGE2) administered by different methods on orthodontic tooth movement and bone metabolism macroscopically, histopatologically, and biochemically. Methods: Forty-five young adult New Zealand rabbits were randomly divided into 3 experimental groups (n = 10/group), 1 positive control group (n = 10), and 1 negative control group (n = 5). The experimental rabbits were fitted with springs exerting 20-g reciprocal force on the maxillary incisors and PGE2 (10 ${\mu}g/mL$) was administered by the intravenous, submucosal, or intra ligamentous route aft er appliance insertion and on days 1, 3, 7, and 14 thereafter. All rabbits were sacrificed on day 21 and their premaxillae were resected for histologic evaluation. Results: Tooth movement was observed in the experimental and positive control groups, but the intraligamentous PGE2 group had the highest values of all analyzed parameters, including serum calcium and phosphorus levels and osteoclastic and osteoblastic populations (p < 0.001). Conclusions: Sub mucosal and intraligamentous PGE2 administration significantly increases orthodontic tooth movement and bone metabolism, but the intraligamentous route seems to be more effective.

• Advances in Computational Design
• /
• v.5 no.3
• /
• pp.323-347
• /
• 2020

The enhancements of bioenergy production effectiveness require the comprehensively experimental study of several parameters affecting these bioprocesses. The interpretation of the obtained experimental results and the estimation of optimum yield are extremely complicated such as misinterpreting the results of an experiment. The use of mathematical modeling and statistical experimental designs can consistently supply the predictions of the potential yield and the identification of defining parameters and also the understanding of key relationships between factors and responses. This paper summarizes several mathematical models used to achieve an adequate overall and maximal production yield and rate, to screen, to optimize, to identify, to describe and to provide useful information for the effect of several factors on bioenergy production processes. The usefulness, the validity and, the feasibility of each strategy for studying and optimizing the bioenergy-producing processes were discussed and confirmed by the good correlation between predicted and measured values.

• Journal of Korean Society for Quality Management
• /
• v.32 no.1
• /
• pp.113-129
• /
• 2004

The reliability of the product can be improved by making the product less sensitive to noises. Especially, it Is important to make products robust against various noise factors encountered in production and field environments. In this paper, the phenomenon of degradation assumes a simple random coefficient degradation model to present analysis procedures of degradation data for robust experimental design. To alleviate weak points of previous studies, such as Taguchi's, Wasserman's, and pseudo failure time methods, novel techniques for analysis of degradation data using the cross array that regards amount of degradation as a dynamic characteristic for time are proposed. Analysis approach for degradation data using robust experimental design are classified by assumptions on parametric or nonparametric degradation rate(or slope). Also, a simulation study demonstrates the superiority of proposed methods over some previous works.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.9
• /
• pp.1381-1386
• /
• 2018

Animal experiments are essential to the study of animal nutrition. Because of the large variations among individual animals and ethical and economic constraints, experimental designs and statistical analyses are particularly important in animal experiments. To increase the scientific validity of the results and maximize the knowledge gained from animal experiments, each experiment should be appropriately designed, and the observations need to be correctly analyzed and transparently reported. There are many experimental designs and statistical methods. This editorial does not aim to review and present particular experimental designs and statistical methods. Instead, we discuss some essential elements when designing an animal experiment and conducting statistical analyses in animal nutritional studies and provide guidelines for submitting a manuscript to the Asian-Australasian Journal of Animal Sciences for consideration for publication.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2E
• /
• pp.76-84
• /
• 1996

The experimental testing results of the large-scale version of a forward-looking ultrasound imaging catheter(FLUIC) are presented, along with the fabrication techniques used, experimental methods, and comparisons of the measured and simulated results. The transducer model is verified by measuring the electrical impedance of the transducer. The pulse width, beamwidth, and the dynamic range for both transmit and pulse-echo response of the fabricated FLUIC are also analyzed. The experimental results conformed its forward-looking imaging capability and the sources of discrepancies between the simulated and experimental beam profiles are addressed.

• Research in Community and Public Health Nursing
• /
• v.25 no.2
• /
• pp.146-157
• /
• 2014

Purpose: The objective of this study is to analyze systematically the trends of experimental researches in the area of community health nursing. Methods: This is a study based on literature review, which analyzed 137 experimental research papers in the Journal of Korean Academy of Community Health Nursing, from the first issue in 1989 to those in 2012. Results: 1) The proportion of experimental researches in the total published papers was 14.9%. 2) The mainly used research method was quasi-experiment, which was 60.6% of them, and there was no RCT. 3) Convenient sampling was used in 95.6% of the researches. 4) Only 5.1% were reviewed for keeping the ethical standards for the study objects by the IRB. 5 When classified by the Omaha Classification System, psycho-social researches were most frequent, which were followed by physiological, health-related behavioral, and environmental ones in order of frequency. Conclusion: This study found that the proportion of experimental research papers was increasing in the 2000s and ethical standards were required more rigorously. However, it was suggested that the research design be more elaborated and sampling methods be manifested to reduce research bias and errors.

• Journal of Korean Society for Quality Management
• /
• v.41 no.1
• /
• pp.119-134
• /
• 2013

Purpose: The purpose of this paper is to show whether the results are changed with respect to the variance of the data, by analysis of data obtained from the Taguchi experimental techniques and general experiment. Because which cannot be prove by mathematical Formula, through experimental examples will show. Methods: Taguchi experiments were carried out with paper Helicopter experiment. Experimental Data are obtained by special designed Drop Test Equipment. While Experimental value arbitrarily changed, we looked at how Significant control Factor of Taguchi Methods and Factor experiments are changed. This process cannot be expressed as a Mathematical formula, but showed as a numerical example. Results: Saw significant changes in the factors when data is outside a certain range of the experimental data. By Test of Equivalence Variance, Experiment data is verified reliability. To find the Control Factor, Taguchi Method is better than the general experiment. Conclusion: We know that a Significant Factor is changed with the range of Variance of Experiment Data. The value of this paper is verified change process with Numerical Data obtained Experiment.