• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.774-781
• /
• 2014

This paper presents a fingerprint database construction method for WLAN RSSI (Received Signal Strength Indicator)-based indoor positioning. When RSSI is used for indoor positioning, the fingerprint method can achieve more accurate positioning than trilateration and centroid methods. However, a FD (Fingerprint Database) must be constructed before positioning. This step is a very laborious process. To reduce the drawbacks of the fingerprint method, a radio propagation model-based FD construction method is presented. In this method, an FD can be constructed by a simulator. Experimental results show that the constructed FD-based positioning has a 3.17m (CEP) error. In this paper, a spatial correlation method is presented to estimate the NLOS(Non-Line of Sight) error included in the FD constructed by a simulator. As a result, the NLOS error of the FD is reduced and the performance of the error compensated FD-based positioning is improved. The experimental results show that the enhanced FD-based positioning has a 2.58m (CEP) error that is a reasonable performance for indoor LBS (Location Based Service).

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.62-69
• /
• 2004

This paper presents an experimental study on the dimensional error in ball-end milling. In the 3D free-formed surface machining using ball-end milling, while machining conditions are varied due to the Z component of the feed and existing hemisphere part of the ball-end mill, the mechanics of ball-end milling are complicated. In the finishing, most of cutting is performed the ball part of the cutter and the machined surface are required the high quality. But the dimensional errors in the ball-end milling are inevitably caused by tool deflection, tool wear, thermal effect and machine tool errors and so on. Among these factors, the most significant one of dimensional error is usually known as tool deflection. Tool deflection is related to the instantaneous horizontal cutting force and varied the finishing cutting path. It lead to decrease cutting area, thus resulting cutting forces but the dimensional precision surface could not be obtained. So the machining experiments are conducted fur dimensional error investigation and these results may be used for decrease dimensional errors in practice.

• Communications for Statistical Applications and Methods
• /
• v.25 no.3
• /
• pp.275-282
• /
• 2018

This paper discusses the use of projections for the sums of squares in the analyses of variance for two-way nested design data. The model for this data is assumed to only have random effects. Two different sizes of experimental units are required for a given experimental situation, since nesting is assumed to occur both in the treatment structure and in the design structure. So, variance components are coming from the sources of random effects of treatment factors and error terms in different sizes of experimental units. The model for this type of experimental situation is a random effects model with more than one error terms and therefore estimation of variance components are concerned. A projection method is used for the calculation of sums of squares due to random components. Squared distances of projections instead of using the usual reductions in sums of squares that show how to use projections to estimate the variance components associated with the random components in the assumed model. Expectations of quadratic forms are obtained by the Hartley's synthesis as a means of calculation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.7
• /
• pp.605-618
• /
• 2012

In this study, the possibility of decision error is investigated to identify and improve the reliability of participants in the process of conducting the sound quality analysis for laser printers. So far, there is not a way to identify and express the possibility of individual participant quantitatively. Thus, the decision error model is proposed which is based on the expectation value between the perceived sounds. Through the experimental verification on the laser printers, it was found that the possibility of decision error is affected according to the normalized difference. The possibility of decision error has inversely proportional to the normalized difference between the perceived sounds. When the normalized difference becomes small value, the uncertainly between decisions is inversely increase, and then it is difficult to obtain the proper result in the process of the jury evaluation for laser printers. For this reason, in this study, the proposed decision error model is added in the previous step of the correlation verification. Comparing to the conventional process only using the correlation based method, after the reliability of each participant is verified, the correlation with the mean response of participants is verified. It was found that the participants who were recognized as having unusual preferences are actually identified as having the reliability problem. Based on the results of this study, the proposed decision error model will be helpful to identify and improve the reliability of participants in the following study for the sound quality analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.409-412
• /
• 2002

This paper presents a measurement method to compromise surface error in surface machining processes. In order to compromise the surface error in machining process, on-machine measurement is essential. There are two kinds of on-machine measurement methods available to measure the surface errors in flat workpieces: i.e., surface scanning method and sensor scanning method. However, motion errors are inevitably engaged in both methods. This paper proposes a new idea to measure the surface error for error compensation. The measurement system consists of a laser, a CCD camera and processing system, a carrier system with a stylus, and some optical units. The experimental results show that the proposed method is useful to compensate the surface errors of machined workpieces.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.137-142
• /
• 2004

A voltage transformer(VT) used for the estabilishment of high voltage national standard, has generally ratio error and phase angle error. Both errors in VT depend critically on values of external burden of VT used. Both ratio ewer and phase angle error in existence of the external burden is calculated. These calculated values are very well consistent with the experimental result. The principle and the measurement method of VT in our institute are also explained.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.12-14
• /
• 2005

In this paper, we proposed an temporal error concealment (EC) using the proposed boundary matching method and the adaptive block matching method. The proposed boundary matching method improves the spatial correlation of the macroblocks (MBs) by reusing the pixels of the concealed MB to estimate a motion vector of a error MB. The adaptive block matching method inspects the horizontal edge and the vertical edge feature of a error MB surroundings, and it conceals the error MBs in reference to more stronger edge feature. This improves video quality by raising edge connection feature of the error MBs and the neighborhood MBs. In particular, we restore a lost MB as the unit of 8${\times}$16 block or 16${\times}$8 block by using edge feature from the surrounding macroblocks. Experimental results show that the proposed algorithm gives better results than the conventional algorithms from a subjective and an objective viewpoint.

• Journal of information and communication convergence engineering
• /
• v.19 no.1
• /
• pp.22-28
• /
• 2021

Convolutional neural networks (CNNs) are one of the most frequently used artificial intelligence techniques. Among CNN-based applications, small and timing-sensitive applications have emerged, which must be reliable to prevent severe accidents. However, as the small and timing-sensitive systems do not have sufficient system resources, they do not possess proper error protection schemes. In this paper, we propose MATE, which is a low-cost CNN weight error correction technique. Based on the observation that all mantissa bits are not closely related to the accuracy, MATE replaces some mantissa bits in the weight with error correction codes. Therefore, MATE can provide high data protection without requiring additional memory space or modifying the memory architecture. The experimental results demonstrate that MATE retains nearly the same accuracy as the ideal error-free case on erroneous DRAM and has approximately 60% accuracy, even with extremely high bit error rates.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.507-512
• /
• 2013

This paper proposes a new model to compensate for errors of a five-axis machine tool. A matrix with error components, that is, an error matrix, is separated from the error synthesis model of a five-axis machine tool. Based on the kinematics and inversion of the error matrix which can be obtained not by using a numerical method, an error compensation model is established and used to calculate compensation values of joint variables. The proposed compensation model does not need numerical methods to find the compensation values from the error compensation model, which includes nonlinear equations. An experiment using a double ball-bar is implemented to verify the proposed model.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.285-293
• /
• 1998

This paper presents unequal error protection and error concealment techniques far robust H.263 video transmission over mobile channels. The proposed error protection scheme has three major features. First, it has the capability of preventing the loss of synchronization information in H.263 video stream as much as possible that the H.263 decoder can resynchronize at the next decoding point, if errors are occurred. Secondly, it employs an unequal error protection scheme to support variable coding rates using rate compatible punctured convolutional (RCPC) codes, dividing the encoded stream into two classes. Finally, a macroblock-interleaving scheme is employed in order to minimize the corruption of consecutive macroblocks due to burst errors, which can make a proper condition for error concealment. In addition, to minimize the spatial error propagations due to the variable length codes, a fast resynchronization scheme at the group of block layer is developed for recovering subsequent error-free macroblocks following the damaged macroblock. futhermore, error concealment techniques based on both side match criterion and overlapped block motion compensation (OBMC) are employed at the source decoder so that it can not only recover the lost macroblock more accurately, but also reduce blocking artifacts. Experimental results show that the proposed scheme can be an effective error protection scheme since proper video quality can be maintained under various channel bit error rates.