• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.3
• /
• pp.397-406
• /
• 2022

This study is an experimental study on the single group pre-post test design for the effects of the exercise program combined with telephone coaching on postural balance, grip strength and depression of the elderly living alone. The subjects of this study were 20 elderly living alone who registered at a senior welfare center located in S City, Gyeonggi-do. A total of 12 session programs were applied from July 3 to October 14, 2021. Before and after the program, the participant's home was visited and 4 stage standing balance test(4 SBT), grip strength and depression were measured. The contents of the intervention consisted of elastic bands and grip balls, and weekly telephone coaching interventions were provided. In the result of this study, the exercise program combined with telephone coaching were statistically significant differences in 4 SBT(3stage)(t=-2.37, p=.029), 4 SBT(4stage)(t=-2.46, p=.024), right grip strength(t=-2.18. p=.042) and depression(t=2.82, p<.001). Therefore, it is expected that the exercise program combined with telephone coaching can be applied as a nursing intervention to improve postural balance, grip strength and reduce depression in the elderly living alone in the community.

• Korean Journal of Organic Agriculture
• /
• v.29 no.4
• /
• pp.601-612
• /
• 2021

This study was conducted to evaluate the appropriate sowing method and mixture seeding rate on germination of Kentucky bluegrass (Poa pratensis L.) and white clover (Trifolium repens L.). The experimental design includes two sowing methods and six mixed seeding per each method: BT₁:BP₀ (broadcast seeding; B, Trifolium repens; T, Poa pratensis; P), BT₁:BP₂, BT₁:BP₃, BT₃:BT₁, BT₂:BP₁, BT₀:BP₁ and ST₁:SP₀ (spot seeding; S), ST₁:SP₂, ST₁:SP₃, ST₃:ST₁, ST₂:SP₁, ST₀:SP₁. The germination was the highest for both species when the seeding rate was higher than other species. In overall, the germination of white clover was higher and faster than Kentucky bluegrass. Two plots, BT₂:BP₁, ST₁:ST₂, were retained the balanced proportion of the germination rate. Therefore, It was suggested, for maintaining the balanced field, it is better to seed white clover twice Kentucky bluegrass on broadcast seeding and Kentucky bluegrass twice white clover on spot seeding. In regard of sowing method, broadcast seeding is better than spot seeding in terms of increasing the germination. It is necessary to supplement the result for real application by long-term monitoring.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.13-23
• /
• 2023

This study is an experimental study on the single group pre-post test design for the effects of the aroma inhalation method with roll-on on stress, pain, depression and blood pressure of the elderly. 33 elderly people who met the selection criteria participated among the elderly using the senior citizen clubs located in S city, Gyeonggi-do. The data collection period was from November 14, 2022 to December 19, 2022. A questionnaire consisting of stress, pain, depression, and blood pressure was measured before and after the aroma roll-on inhalation intervention. The components of aroma essential oil included Marjoram, Geranium, Peppermint and Orange sweet that were diluted in Jojoba oil which was the carrier oil. The aroma inhalation method with roll-on was carried out 3 times day for 4 weeks. In the result of this study, the aroma inhalation method with roll-on were statistically significant differences in stress(t=2.63, p=.013), pain(t=2.46, p=.019), and systolic blood pressure(t=3.01, p=.005) of the participants. Therefore, aroma roll-on therapy is expected to be available as a useful nursing intervention method for reducing stress, relieving pain, and managing blood pressure in the elderly using the senior citizen clubs.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.231-245
• /
• 2023

In the cosmetics industry, it is important to develop new materials for functional cosmetics such as whitening, wrinkles, anti-oxidation, and anti-aging, as well as technology to increase absorption when applied to the skin. Therefore, in this study, we tried to optimize the nanoemulsion formulation by utilizing response surface methodology (RSM), an experimental design method. A nanoemulsion was prepared by a high-pressure emulsification method using Glabridin as an active ingredient, and finally, the optimized skin absorption rate of the nanoemulsion was evaluated. Nanoemulsions were prepared by varying the surfactant content, cholesterol content, oil content, polyol content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization as RSM factors. Among them, surfactant content, oil content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization, which are factors that have the greatest influence on particle size, were used as independent variables, and particle size and skin absorption rate of nanoemulsion were used as response variables. A total of 29 experiments were conducted at random, including 5 repetitions of the center point, and the particle size and skin absorption of the prepared nanoemulsion were measured. Based on the results, the formulation with the minimum particle size and maximum skin absorption was optimized, and the surfactant content of 5.0 wt%, oil content of 2.0 wt%, high-pressure homogenization pressure of 1,000 bar, and the cycling number of high-pressure homogenization of 4 pass were derived as the optimal conditions. As the physical properties of the nanoemulsion prepared under optimal conditions, the particle size was 111.6 ± 0.2 nm, the PDI was 0.247 ± 0.014, and the zeta potential was -56.7 ± 1.2 mV. The skin absorption rate of the nanoemulsion was compared with emulsion as a control. As a result of the nanoemulsion and general emulsion skin absorption test, the cumulative absorption of the nanoemulsion was 79.53 ± 0.23%, and the cumulative absorption of the emulsion as a control was 66.54 ± 1.45% after 24 h, which was 13% higher than the emulsion.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.54-60
• /
• 2022

The planting date of corn for silage has been delayed because of spring drought and double cropping system in Korea. This experiment was conducted to evaluate agronomic characteristics, forage production and feed value of corn at April and May in 2019. Experimental design was a split-plot with three replications. Planting dates (12 April and 10 May) were designated to the main plot, and corn hybrids ('P0928', 'P1543' and 'P2088') to the subplot. The silking days of the early planting date (12 April) was 79 days and that of the late planting date (10 May) was 66 days (p<0.0001), however, there were no significant differences among the corn hybrids. Ear height of the late planting date was higher than that of the early planting (p<0.05), while there were no significant differences in plant height of corn. Insect resistance at the early planting was lower than that of late planting (p<0.05), however, lodging resistance was no significant difference at planting date. The rice black streaked virus (RBSDV) infection of early planting was 3.7% and that of late planting was 0.3% (p<0.001). Dry matter (DM) contents of stover, ear and whole plant had significant difference at planting date (p<0.05). And differences in ear percentages were observed among the corn hybrids (p<0.01). And ear percentages of early maturing corn ('P0928') was higher than for other hybrids. Ear percentage at the early planting date was higher than that at the late planting date (p<0.01). DM and total digestible nutrients (TDN) yields had significant difference at planting date, however, there were no significant differences among the corn hybrids. DM and TDN yields at the late planting (21,678 kg/ha and 14,878 kg/ha) were higher than those of the early planting (13,732 kg/ha and 9,830 kg/ha). Crude protein content at the early planting date was higher than that of the late planting. Acid detergent fiber content of the late planting was lower than that of the early planting date (p<0.01), while there were no significant neutral detergent fiber content difference among the corn tested. Calculated net energy for lactation (NE_L) and TDN at the early planting were higher than those of at the late planting (p<0.01). Results of this our study indicate that the late planting date (May) is better than early planting date (April) in forage yield and feed value of corn. Therefore, the delay of planting date by May was more suitable for use in cropping system.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.33-43
• /
• 2016

Pinellia tripartita(Blume) Schott is a herbaceous perennial plant belonging to the Araceae and distributed on Asia including of Korea, Japan, and China. P. tripartita is often used for gardening but has not been developed mass-breeding methods. In this study, we compared the tuber growth in different combinations of mixed soils used six compositions. Tubers used to study was cultured in vitro and divided into two groups. Type I was diameter more than 1cm and the group of Type II was diameter below than 1cm. Enlargement of tubers and growth of aerial parts were measuring the plant height, number of fresh leaves and dead leaves, number of bullets, tuber size, and fresh / dry weight. The size/weight and numbers of tubers from the mixed soil B (coir 68.0%, peat moss 14.7%, perlite 3.0%, vermiculite 7.0% and zeolite 7.0%) were the best grown up for eight weeks. In case of Type I, GI (Growth index) of tuber size and weight were 45% and 101%, respectively. The difference of growth was doubled compared to the bad growth treatment as the mixed soil E(Coir 14.3%, peat moss 14.3%, perlite 42.9%, vermiculite 14.3%, and zeolite 14.3%). These results could be used as the basic information for the similar experimental design for the P. ternata.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.201-209
• /
• 2010

Generally, PSC girder bridge uses total gross cross section to resist applied loads unlike reinforced concrete member. Also, it is used as short and middle span (less than 30 m) bridges due to advantages such as ease of design and construction, reduction of cost, and convenience of maintenance. But, due to recent increased public interests for environmental friendly and appearance appealing bridges all over the world, the demands for longer span bridges have been continuously increasing. This trend is shown not only in ordinary long span bridge types such as cable supported bridges but also in PSC girder bridges. In order to meet the increasing demands for new type of long span bridges, PSC hollow box girder with H-type steel as compression reinforcements is developed for bridge with a single span of more than 50 m. The developed PSC girder applies compressive prestressing at H-type compression reinforcements using unbonded PS tendon. The purpose of compressive prestressing is to recover plastic displacement of PSC girder after long term service by releasing the prestressing. The static test composed of 4 different stages in 3-point bending test is performed to verify safety of the bridge. First stage loading is applied until tensile cracks form. Then in second stage, the load is removed and the girder is unloaded. In third stage, after removal of loading, recovery of remaining plastic deformation is verified as the compressive prestressing is removed at H-type reinforcements. Then, in fourth stage, loading is continued until the girder fails. The experimental results showed that the first crack occurs at 1,615 kN with a corresponding displacement of 187.0 mm. The introduction of the additional compressive stress in the lower part of the girder from the removal of unbonded compressive prestressing of the H-type steel showed a capacity improvement of about 60% (7.7 mm) recovery of the residual deformation (18.7 mm) that occurred from load increase. By using prestressed H-type steel as compression reinforcements in the upper part of cross section, repair and rehabilitation of PSC girders are relatively easy, and the cost of maintenance is expected to decrease.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.189-197
• /
• 2023

Purpose. This study aimed to compare and evaluate the shear bond strength between various temporary prostheses resin blocks fabricated by subtractive and additive manufacturing methods bonded to self-curing reline resin. Materials and methods. The experimental groups were divided into 4 groups according to the manufacturing methods of the resin block specimens and each specimen was fabricated by subtractive manufacturing (SM), additive manufacturing stereolithography apparatus manufacturing (AMS), additive manufacturing digital light processing manufacturing (AMD) and conventional self-curing (CON). To bond the resin block specimens and self-curing resin, the reline resin was injected and polymerized into the same location of each resin block using a silicone mold. The shear bond strength was measured using a universal testing machine, and the surface of the adhesive interface was examined by scanning electron microscopy. To compare between groups, one-way ANOVA was done followed by Tukey post hoc test (α = 0.05). Results. The shear bond strength showed higher values in the order of CON, SM, AMS, and AMD group. There were significant differences between CON and AMS groups, as well as between CON and AMD groups. but there were no significant differences between CON and SM groups (P > .05). There were significant differences between SM and AMD groups, but there were no significant differences between SM and AMS groups. The AMS group was significantly different from the AMD group (P < .001). The most frequent failure mode was mixed failures in CON and AMS groups, and adhesive failures in SM and AMD groups. Conclusion. The shear bond strength of SM group showed lower but not significant bond strength compared to the CON group. The additive manufacturing method groups (AMS and AMD) showed significantly lower bond strength than the CON group, with the AMD group the lowest. There was also a significant difference between the AMD and SM group.

• Korean Journal of School Psychology
• /
• v.15 no.3
• /
• pp.399-431
• /
• 2018

The purpose of this study was to summarize the empirical literature on implementation of positive behavior support (PBS) within a multi-tiered system of supports in American and Korean schools and to compare its key features and outcomes in an attempt to suggest future directions for development of a Korean school-wide PBS model and implementation manuals as well as directions for future research. Twenty-four American articles and 11 Korean articles (total 35 articles) that reported the outcomes of implementation of PBS at a tier 1 and/or tier 2, or tier 3 level and that met established inclusion criteria were analyzed using systematic procedures. Comparisons were made in the areas of key features and outcomes of PBS in addition to general methodology (e.g., participants, design, implementation duration, dependent measures) at each tier of PBS. The results indicated that positive outcomes for student behavior and other areas were reported across tiers in all American and Korean studies. At the tier 1 level, teaching expectations and rules were the primary focus of PBS in American and Korean schools. However, Korean schools focused on modifying the school and classroom environments and teaching social skills whereas American schools focused on teacher training on standardized interventions or curricular by experts and teacher support during implementation of PBS. At the tier 2 level, more American studies reported implementation of tier 2 interventions within school-wide PBS, and Check/In Check/Out (CICO) was found to be the most commonly used tier 2 intervention. The results also indicated that in comparison to Korean schools, American schools were more likely to use systematic screening tools or procedures to identify students who need tier 2 interventions and more likely to promote parental involvement with implementing interventions. At the tier 3 level, more Korean studies reported the outcomes of individualized interventions, but more American studies reported that designing individualized intervention plans based on comprehensive functional behavior assessment results and establishment of systematic screening systems were focused when implementing individualized interventions. Furthermore, few Korean studies reported the assessment of procedural integrity, social validity, and contextual fit in implementing PBS across tiers, indicating the need for development of valid instruments that could be used in assessing these areas. Based on these results, limitations of the study and suggestions for future research are discussed.