• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.161-166
• /
• 2001

The prototype of a tactile sensor with $4\times 4$ taxels using PVDF was fabricated. The electrode patterns of the thin Cu tape are attached to the 28${\mu}{\textrm}{m}$ thickness PVDF using conductive adhesive and covering the sensor using polyester film for insulation. The structure of the sensor is flexible and the fabrication procedure is easy relatively. Also the output characteristics of the sensor was nearly linear with 8% deviation. The signals of a contact pressure to the tactile sensor are sensed and processed through A/D converter, DSP system and personal computer. The reasonable performance for the detection of contact shape and force distribution was verified through the experiment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1087-1090
• /
• 2007

A wireless magnetic torque sensor is utilized to measure the torque generated in the rotating shaft in magnetic field without connecting to the shaft by any wire. In this study, a new wireless magnetic torque sensor was introduced. The structure of the sensor was explained detailed as well as its operation principle. Resulting from the torque measurement experiment results, the sensor was proven to measure the generated torque effectively. Compared with traditional contact torque sensor, the wireless one has low cost and good environment adaptation ability. Moreover, the intractable wrapping wires around the shaft are removed in this design. Hence the wireless torque sensor may be expected as a possible sensing device for many applications, such as the electric assisting rotation system in automobiles, the torque sensing system in motors, the arm rotation system in robotics and so on.

• 통합자연과학논문집
• /
• 제10권4호
• /
• pp.232-239
• /
• 2017

The researcher set up multiple sensor units on the road slope such as national highway and highway where there is a possibility of loss, and using the acceleration sensor built into the sensor unit the researcher will sense whether the inclination of the road slope occur in real time, and Based on the sensed data, the researcher tries to implement a system that detects collapse of road slope and dangerous situation. In the experiment of measuring the error between the actual measurement time and the judgment time of the monitoring system when judging the warning of the sensor and falling rock detection by using the acceleration sensor, the error between measurement time and the judgment time at the sensor warning was 0.34 seconds on average, and an error between measurement time and judgment time at falling rock detection was 0.21 seconds on average. The error is relatively small, the accuracy is high, and thus the change of the slope can be clearly judged.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.172-173
• /
• 2014

The study is used to verify the applicability of the sensor to monitor penetration of chloride into the concrete, like real coastal environment. After manufacturing the specimen adapt corrosion sensor for chloride penetration monitoring, chloride spray experiment was conducted. And then, It was checked the possibility of monitoring of the penetrated chloride by measuring the resistance of the corrosion sensor that was embedded in each depth of the concrete. Experimental results, it is confirmed that the corrosion resistance of the sensor was increased depending on the concentration of chloride. Therefore, it is estimated that the sensor is available for monitoring of chloride penetration.

• 융합보안논문지
• /
• 제6권3호
• /
• pp.79-86
• /
• 2006

본 논문에서는 광기전력 효과를 이용한 적외선 센서(SHARP사의 GP2D12)모듈의 거리에 따른 센서의 감도와 물체와 센서가 이루는 각도의 변화에 대한 센서의 감도를 측정하여 측정된 센서값을 블루투스를 이용해서 근거리에 있는 PC로 전송하고 전송된 값을 프로그램에 의하여 분석하였다. 분석한 결과 적외선 센서의 특성을 프로세서에서 바로 측정하였을 때와 측정된 값을 블루투스 통신을 이용하여 전송하였을 때 비교 값에 차이를 나타내지 않았다. 따라서 블루투스를 이용하여 100m이내의 근거리에 있는 물체를 적외선 센서로 측정 할 수 있음을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2590-2597
• /
• 2002

A new torque measuring apparatus adopting the basic principle of a capacitive type sensor is proposed in this article. Two plate electrodes are working as a capacitive sensor, whose capacitance varies as torque is applied. One end of each plate is connected to the torque carrying shaft. Output characteristics of the torque sensor were theoretically analyzed and its validity was investigated through experiment. Calculations and calibration experiments show that the output is nonlinear, that is, the sensitivity is very high at low torque but decreases as torque increases. The sensitivity of the proposed system is about 100 times roughly higher than that of a conventional 4-strain gauge type torque sensor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.527-532
• /
• 2001

In this paper, we will propose the new method that estimates the sensing ability of HH smart sensor. We have developed a new signal processing method that can distinguish among different materials relatively. The HH smart sensor was developed for recognition of materials. We made the HH smart sensor in our experiment. Then, we estimated the ability to recognize objects according to acceleration value. We estimated the sensing ability of HH smart sensor with the $R_{SAI}$ method. Experiments and analysis were executed to estimate the ability to recognize objects according to acceleration value changing. Dynamic characteristics of HH smart sensor were evaluated relatively through a new $R_{SAI}$ method that uses the power spectrum density. Applications of this method are for finding abnormal conditions of objects (auto-manufacturing), feeling of objects (medical product), robotics, safety diagnosis of structure, etc.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.22-27
• /
• 2004

A new method that estimates the sensing ability of HH smart sensor is proposed. The new signal processing method have been developed that can distinguish among different materials relatively. The HH smart sensor was developed far recognition of materials. The HH smart sensor was made for experiment. Then, it was estimated the ability to recognize objects according to acceleration value. The sensing ability of HH smart sensor has been estimated with the $R_{SAI}$ method. Experiments and analysis were executed to estimate the ability to recognize objects according to acceleration value changing. Dynamic characteristics of HH smart sensor were evaluated relatively through a new $R_{SAI}$ method that uses the power spectrum density. Applications of this method are for finding abnormal conditions of objects (auto-manufacturing), feeling of objects (medical product), robotics, safety diagnosis of structure, etc.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.894-899
• /
• 2008

Measured sensor datum from a quadruped robotics is commonly used for recognizing physical environment information which controls the posture of robotics. We can advance the ambulation with this sensed information and need to synthesize various sensors for obtaining accurate data, but most of these sensors are expensive and require excessive load for the operation. Those defects can be serious problem when it comes to the prototype's practicality and mass production, and maintenance of the system. This paper suggests virtual sensor technology for avoiding previous defects and presents ways to apply a theory to a walking robotics through virtual sensor information which is trained with several kinds of actual sensor information from the prototype system; the general algorithm is initially based on the neural network theory of back propagation. In specific, we verified a possibility of replacing the virtual sensor with the actual one through a reaction force measurement experiment.

• 센서학회지
• /
• 제14권4호
• /
• pp.265-271
• /
• 2005

In this study, a variable capacitive pressure sensor is fabricated for TPMS (Tire Pressure Monitoring System). This study is for developing sensors which consecutively measure the tire pressure given as 30 psi from the industrial standard. For improving non-linearity of the prior capacitive pressure sensors, it is suggested that touch mode capacitive pressure sensor be applied. In addition, initial capacitance is designed as small as possible for the conformity to the wireless sensor. ANSYS, commercial FEA package, is used for designing and simulating the sensor. The device is progressed by MEMS (Micro Electro Mechanical Systems) fabrication and packaged with PDMS. The result is obtained sensitivity, 1 pF/psi, through a pressure test. The simulation result is discrepant from experiment one. Wafer's uniformity is presumed as the main reason of discrepancy.