• Journal of Korean Elementary Science Education
• /
• v.40 no.3
• /
• pp.326-342
• /
• 2021

In this study, experimental guide materials for teachers were developed so that algorithm expression, the core of computational thinking, can be applied to experimental activities. The experimental manuals presented in text was converted into an algorithmic form with a linear, branched, and repetitive structure according to the information visualization process using flowchart symbols. As an example, an experiment guide materials was developed by applying an algorithm expression to an experiment to find out the properties of a magnet. The developed experiment guide materials is different from the existing experiment guide materials expressed only sequentially in that it has an algorithmic structure of branching and repetition in which the suitability and judgment of information are expressed, and that the experiment process is visualized and expressed. It is expected that the experimental guide materials developed in this study will help teachers to understand algorithmic thinking and to implement experiments using it.

• Journal of the Korean Chemical Society
• /
• v.60 no.5
• /
• pp.327-341
• /
• 2016

This study explores the effective visual resources in the “regularity in chemical reactions” unit of ninth grade science textbooks (2009 revised version). The frequency and role of visual resources were initially examined, and the students’ perceptions of visual resources were investigated. The results of the analysis represented the learning material presentation (68%), motivational categories (14%), guide to inquiry procedures (9%), and inquiry results and summaries (8%). According to the investigation of the students’ perceptions of visual resources, the most effective visual resource for motivation is a photograph depicting physical and chemical changes, such as in bread baking and the most effective for learning material presentations in mass conservation, definite proportion, and stoichiometric concept units were a cartoon, graph, and formula representing stoichiometric phenomena, respectively. The most effective resource for guide to inquiry (experimental) procedures were photographs of both instruments and sequential experiment processes; and in the inquiry results and summary category, incomplete tables and graphs for students to work on themselves. The aims of this research are to increase the usefulness of visual resources in the teaching-learning activity and provide informative supplements for the development and improvement of visual resources, according to the students’ perceptions.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.124-130
• /
• 2009

In the multi-stage shape drawing process, the most important aspect for the economy is the correct design of the various drawing stage. For most of the products commonly available round or square materials can be used as initial material. However, special products should be pre-rolled. This study proposes a process design method of multi-stage shape drawing process for producing cross roller guide. Firstly, a standard classification of shape drawing process is suggested based on the requirement of pre-rolling process. And a design method is proposed to design the intermediate die shape. The process design method is applied to design the multi-stage shape drawing process for producing cross roller guide. Finally, the effectiveness of the proposed design method is verified by FE-analysis and shape drawing experiment.

• Journal of Korean Elementary Science Education
• /
• v.24 no.2
• /
• pp.160-173
• /
• 2005

In this study, we had tried to present a plan for improving the actual conditions of practical utilization of teaching material for 6th grade science developed by Ministry of Education & Human Resources Development and distributed to all elementary schools in Korea. Also we presented ways of better utilization of the teaching material after investigating the actual conditions of practical utilization. A survey was made to investigate and collect all data in the major metropolitan cities, the Kangwon, Chungcheong, Honam, and Kyeongsang area, respectively. We surveyed 316 6th grader teachers to investigate the actual conditions of distribution and utilization of teaching material as a general research. In addition, we surveyed 46 teachers to investigate the organization and content of teaching material as a particular research. The results are as follows. First, the teaching material was not approximately transmitted and kept to 6th grader teachers. Second, the utilization guide was not made. Third, it was reported that the thematic divisions of teaching material was a strong point, but the less detailed experiment manual was a weak point. Fourth, the consideration of content difficulties and simplicity was necessary to improve the material. Fifth, additional items should be included in the introductory presentation, convenience of reorganization, activity material causing learning interest, guidance of substitution experiment, and more concrete notice of experiment activity. Finally, there were positive responses of more than 4.0 point of Likert scale (1 to 5 point scale) in detail investigations of thematic items, which could have possibility that the teaching material was helpful to elementary school science field.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.989-995
• /
• 2018

Argonne National Laboratory of the United States and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have cooperated on the development, design, and construction of a neutron source facility. The facility was constructed at Kharkov, Ukraine, and its commissioning process is underway. The facility will be used for researches, producing medical isotopes, and training young nuclear specialists. The neutron source facility is designed with a provision to include a cryogenically cooled moderator system-a cold neutron source (CNS). This CNS provides low-energy neutrons, which will be used in the scattering experiment and material structures analysis. Cold neutron guides, coated with reflective material for the low-energy neutrons, will be used to transport the cold neutrons to the experimental site. The cold neutron guides would keep the cold neutrons within certain energy and angular space concentrated inside, while most of the gamma rays and high-energy neutrons are not affected by the cold neutron guides. For the KIPT design, the cold neutron guides need to extend several meters outside the main shield of the facility, and curved guides will also be used to remove the gamma and high-energy neutron. The neutron guides should be installed inside a shield structure to ensure an acceptable biological dose in the facility hall. Heavy concrete is the selected shielding material because of its acceptable performance and cost. Shield design analysis was carried out for the CNS guide hall. MCNPX was used as the major computation tool for the design analysis, with neutron and gamma dose calculated separately. Weight windows variance reduction technique was also used in the shield design. The goal of the shield design is to keep the total radiation dose below the $5.0{\mu}Sv/hr$ guideline outside the shield boundary. After a series of iterative MCNPX calculations, the shield configuration and parameters of CNS guide hall were determined and presented in this article.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.112-116
• /
• 2017

Purpose: The purpose of this study was to analyze the milling characteristics of white rice depending on the guide angles of the cutting roller's induced guide, as well as to verify optimum milling conditions for the cutting-type milling machine. Methods: Brown rice, which was produced in Cheongju-si, Chungcheongbuk-do, Republic of Korea, in 2014, was used as the experimental material. The milling characteristics of white rice were measured under six different guide angle levels of the cutting roller, which were none, $0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$. The quantity of brown rice for each experiment was 500 kg, and the milling characteristics were measured according to the whiteness, rice temperature, cracked rice ratio, broken rice ratio, and energy consumption. Results: The whiteness of white rice maintained a uniform level, indicating at range of $38{\pm}0.5$, regardless of the cutting roller guide angles under all conditions. The rice temperature rise during milling was found to be rather low, at $13.9^{\circ}C$ and $13.6^{\circ}C$ at $10^{\circ}$ and $15^{\circ}$ guide angles, respectively. The cracked rice ratio after milling was 18.67%-19.47%, and the broken rice ratio was 0.68% at a $10^{\circ}$ guide angle, which is the lowest in comparison to other guide angles. Energy consumption was lower when the guide was used compared to that with-out the use of the guide. The energy consumption tended to increase as the cutting roller guide angle increased. Conclusions: From the above results, we conclude that the cutting roller guide angles of $0^{\circ}$ and $10^{\circ}$ are suitable for producing high quality rice during milling with a cutting-type milling machine.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.377-382
• /
• 2011

Up to now, process design of multistage profile drawing from initial round material is performed through trial-and-error based on experience of industrial experts. This means the increase in production cost and excessive time consuming. In this study, process design program was developed for multistage profile drawing from initial round material. The program was made using VisualLISP. Therefore, the program can be operated by AutoCAD program. In order to verify the effectiveness of the program, two stage profile drawing process for producing heavy duty guide rail was design by using the program. In addition FE analysis and profile drawing experiment were performed. As a result, the program can be used in order to design profile drawing process design.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.2
• /
• pp.93-96
• /
• 2007

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1 W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14 W power consumption and start up voltage time is under the 15ms in the ambient temperature $-20\;^{\circ}C$.

• Journal of Technologic Dentistry
• /
• v.31 no.2
• /
• pp.31-38
• /
• 2009

In recent year, the population for sports has been increased and lots of wounded patients at the oral & facial portion were troubled with the accidents. So, it was needed to protect them from the sports accident, by the use of the mouthguard appliance. This study was done as ae guide for selection of the mouthguard materials. Such mouthguards classified as E.V.A., PE, silicone as material, Scheu(Germany), Tru-Tain(U.S.A.), Dreve(Germany) as companies, 1.5mm, 3.0mm, and 4.0mm as thickness and single sheet, soft double sheet, hard double sheet methods were selected for experiment to compare the fracture protect test. The obtained results are as follows. 1. All types of mouthguards, whatever differences there are in material, production company, procedure and the thickness, were effective for fracture protect effect. 2. The most effective one for fracture protection was recommended as E.V.A. in material, and Tru-Tain in company. 3. More thick, and soft & hard multi sheets productions were more effective for fracture protection.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.65-69
• /
• 2010

High energy electron beams were to concentrically dose inside a tumor and more energy is a shape decreased of dose. Therefore, it is useful to radiation therapy of a tumor. Also high energy electron beams ionized into collision with a atom in structure material of tissue and it has big changes to dose distribution by multiple scattering. The study had to establish characteristic of electron beams from interaction of electron beams and materials. Experiment method was to measure dependence of electron beam central axis for depth dose curve, field flatness and symmetry and field size dependence. The results were able to evaluate data for a datum pint of electron beam. Also radiotherapy has to be considered for not only energy pencil of lines but characteristic, electron guide and isodose curves distribution.