• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.1003-1008
• /
• 1994

This paper is about an experiment of speaker-independent automation Korean spoken words recognition using Multi-Layered Perceptron and Error Back-propagation algorithm. The words were not segmented into syllables or phonemes, and some feature components extracted from the words in equal gap were applied to the neural network. This paper tried to find out the optimum conditions through various experiment which are comparison between total and pre-classified training.

• Journal of Environmental Science International
• /
• v.3 no.4
• /
• pp.427-437
• /
• 1994

Batch experiments were performed to evaluate the effect of sludge acclimation and contact load on the behavior of phosphorus and organic substrates under anaerobic conditions. Four different sludges were acclimated in the sequencing batch reactors operated by intermittent aeration. All the experiments performed in a bench scale have shown the following results: 1. The unreleaseable phosphorus contents for four different sludges are the range of 16 mg P/g SS to 24 mg P/g SS, depending on the sludge acclimation conditions. 2. All the specific substrate uptake rates(SSUR) are expressed in the first order equation for releaseable phosphorus contents. The reaction rate coefficient k, has the values of 4.0, 8.9, and 13.8 mg COD/mg P/hr, depending on the contact load and slut식e species. 3. As reaction proceeds, the ratios of $\delta$P to -$\delta$COD at high contact load are almost constant in the range of 0.10 to 0.14, but at low contact load, they increase from 0.08 to 0.27.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.30-35
• /
• 2020

Plastic pulleys used for the purpose of power transmission have to very high roundness characteristics. The roundness of plastic pulleys is influenced by many factors. In this study, the effect of molding conditions on the roundness of pulleys was analyzed using a numerical analysis program. To improve the roundness, molding conditions that minimize the amount of deformation of the pulley were studied through an experimental design method. Among the experimental design methods, the Taguchi method was used, and the main molding conditions affecting the deformation of the pulley were the resin temperature and the holding pressure. It was found that the amount of deformation is reduced by about 2.86% when molding with the optimum molding conditions compared to when the optimum molding conditions are not applied.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.2
• /
• pp.61-69
• /
• 2004

In this study, on-site performance test of an air source heat pump which has a rated capacity of 10 RT is carried out. Since indoor and outdoor air conditions can not be controlled to satisfy the standard test conditions, experiments are done with the inlet air conditions as they exist. To estimate the performance of the heat pump for other conditions, the heat pump is modeled with a small number of characteristic parameters. The values of the parameters are determined from the few measurements measured on-site during steady operation. A simulation program is developed to calculate cooling capacity and power consumption at any other arbitrary operating conditions. The simulation results are in good agreement with the experiment. This study provides a method of an on-site performance diagnosis of an air source heat pump.

• Atmosphere
• /
• v.25 no.2
• /
• pp.353-366
• /
• 2015

The impact of land and ocean initial condition on coupled general circulation model seasonal predictability is assessed in this study. The CGCM used here is Pusan National University Couple General Circulation Model (PNU CGCM). The seasonal predictability of the surface air temperature and ocean potential temperature for boreal winter are evaluated with 4 different experiments which are combinations of 2 types of land initial conditions (AMI and CMI) and 2 types of ocean initial conditions (DA and noDA). EXP1 is the experiment using climatological land initial condition and ocean initial condition to which the data assimilation technique is not applied. EXP2 is same with EXP1 but used ocean data assimilation applied ocean initial condition. EXP3 is same with EXP1 but AMIP-type land initial condition is used for this experiment. EXP4 is the experiment using the AMIP-type land initial condition and data assimilated ocean initial condition. By comparing these 4 experiments, it is revealed that the impact of data assimilated ocean initial is dominant compared to AMIP-type land initial condition for seasonal predictability of CGCM. The spatial and temporal patterns of EXP2 and EXP4 to which the data assimilation technique is applied were improved compared to the others (EXP1 and EXP3) in boreal winter 2m temperature and sea surface temperature prediction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.354-357
• /
• 2005

The in vitro degradability of yeast and the effect of yeast on the in vitro degradability of forage may differ in terms of the specific yeast strains or their incubation conditions. Thus in experiment 1, two strains of sake yeast (strainK7 and strainK9) and one strain of bakers' yeast (KY5649) were incubated in an aerobic condition. In experiment 2, aerobically or anaero bically incubated K7 was used for investigating the in vitro degradability of yeast, the effect of yeast on the in vitro degradability of forage, and the degradability of yeast by pepsin and pronase treatment. The in vitrodegradability of bakers' yeast was significantly (p<0.05) higher than those of sake yeasts. The in vitro degradability of anaerobically incubated yeast was significantly (p<0.01) higher than that of aerobically incubated yeast. The degradability of bakers' yeast by pepsin treatment was significantly (p<0.01) higher than that of the sake yeasts. The degradability of bakers' yeast by pronase treatment was slightly higher than that of the two sake yeasts, while the degradability of anaerobically incubated yeast by both enzymes, respectively, was significantly (p<0.01) higher than that of aerobically incubated yeast. The degradability of forages was increased significantly (p<0.05) by the addition of yeasts. The degradability of roughage by sake yeast tended to be higher than that by the bakers' yeast. The degradability of roughage was significantly (p<0.05) higher by anaerobically incubated yeast than by aerobically incubated yeast. Given the above results, it seems that in vitro degradability of yeast and the magnitude of the increment of roughage degradation differ among the yeast strains and their incubation conditions.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.47-55
• /
• 2011

The purpose of this study was to determine the legibility distance for traffic road sign and traffic sign, fixation duration and number of fixation during the time of recognition of traffic road signs under different vision conditions. This experiment was conducted on a closed-road circuit which has realistic driving road and environment Each participant drove the real vehicle for the experiment and specially built traffic road sign for the experiment and traffic road signs on the side of closed-road circuit were used. Different vision conditions were simulated using spectacle lenses to reach visual acuity 1.0 and 0.8 and it was 1.2 without spectacles and each participant tested under 3 vision conditions.. The result of this study demonstrated that there was a significant difference on legibility distance between visual acuity of 1.2 and 0.8 and there were also significant difference on fixation duration and number of fixations with smaller traffic signs. This study demonstrated the importance of vision correction for driving at night-time, also showed there would be difference on legibility distance and efficiency of eye movement such as fixation duration and number of fixation despite of satisfied visual acuity for driver's license requirement.

• Journal of Korean Elementary Science Education
• /
• v.24 no.2
• /
• pp.160-173
• /
• 2005

In this study, we had tried to present a plan for improving the actual conditions of practical utilization of teaching material for 6th grade science developed by Ministry of Education & Human Resources Development and distributed to all elementary schools in Korea. Also we presented ways of better utilization of the teaching material after investigating the actual conditions of practical utilization. A survey was made to investigate and collect all data in the major metropolitan cities, the Kangwon, Chungcheong, Honam, and Kyeongsang area, respectively. We surveyed 316 6th grader teachers to investigate the actual conditions of distribution and utilization of teaching material as a general research. In addition, we surveyed 46 teachers to investigate the organization and content of teaching material as a particular research. The results are as follows. First, the teaching material was not approximately transmitted and kept to 6th grader teachers. Second, the utilization guide was not made. Third, it was reported that the thematic divisions of teaching material was a strong point, but the less detailed experiment manual was a weak point. Fourth, the consideration of content difficulties and simplicity was necessary to improve the material. Fifth, additional items should be included in the introductory presentation, convenience of reorganization, activity material causing learning interest, guidance of substitution experiment, and more concrete notice of experiment activity. Finally, there were positive responses of more than 4.0 point of Likert scale (1 to 5 point scale) in detail investigations of thematic items, which could have possibility that the teaching material was helpful to elementary school science field.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.932-940
• /
• 2015

One of the main factors restricting production of triploid seedless watermelon is poor germination due to weak embryos, thick seed coats, and larger air spaces. This study was carried out to investigate the priming effects of different concentrations of chemicals, including hydrogen peroxide ($H_2O_2$), fusicoccin, and gibberellic acid (GA) on germination and seedling uniformity of triploid watermelon (Citrullus lanatus). Three commercial triploid cultivars, Seedless Plus, Sinus, and Sizero, were pretreated with water and different levels of $H_2O_2$ (2 and 4%), fusicoccin (FC: 1, 5, and $10{\mu}M$), and GA (1, 5, and $10{\mu}M$). The present findings helped to find optimal priming conditions for improving germination of triploid watermelon. Treatment with $5{\mu}M$ GA and hydropriming helped to break seed dormancy, enhancing the final germination percentages in all triploid cultivars and increasing the germination index in Sizero. These seed-priming treatments could be used on large scale for industrial applications. Moreover, hydropriming provides a simple, effective, and costless method to improve seed germination and seedling vigor of Sinus and Sizero varieties.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.107.1-107
• /
• 2003

The fermentation process and subsequent processing determine the efficacy of a bioherbicide propagule. Large batches of biomass of the mycoherbicide agent for white clover, Sclerotium sp.(BWC98-105) was produced in simple liquid fermentator in 5 gallons vessels(Model No. 8087, Dabo Inc., Korea) with oxygen supply(DPH16000, FineTech Inc., Korea) simulating industrial conditions by utilizing commercially available, inexpensive ingredients (10 ％ rice bran), The maximum biomass yield of Sclerotium sp.(BWC98-105) was obtained after 5 days of air pumped incubation at room temperature condition(22-28$^{\circ}C$). By using this simple facility, it could get fragmented or proliferated greatly and attained maximum mycelia biomass. The biomass of mycoherbicide agent consisted of hyphae devoid of spores. Biomass mycelia of the fungus 99％ survival at room temperature after 2 me. A thorough understanding of the effects of fermentation and formulation on viability and virulence is required to guide these processes. After an economical yield level of bioherbicide propagule has been achieved in a fermentation process, formulation becomes a critical factor which influences product efficacy. Because the fermentation must be stopped at a point when virulence/viability are optimum, the live bioherbicide propagule must be stabilized, formulated, and packaged.