• International Journal of Quality Innovation
• /
• 제6권2호
• /
• pp.105-115
• /
• 2005

In recent years, high-speed recording CD-R has already become the mainstream of CD-R market. Therefore, to promote the efficiency of recording CD-R is of significant importance. This study uses Taguchi's parameter design to improve the yield rate for the process of CD-R substrate. We have found 13 three-level controllable factors from the fishbone diagram, repeated 10 times the experiment with the L27(313) orthogonal array, and measured seven quality characteristics. We employ four general methods to find the optimal parameter conditions individually. Then, we perform the confirmation experiment and compare the results. Finally, we obtain the optimal parameter conditions. According to the analysis of benefits, the optimal parameter conditions can reduce the quality loss of CD-R substrate to about 21%. In the future, the results can be extended to other research of DVD-R substrate.

• 설비공학논문집
• /
• 제20권5호
• /
• pp.334-341
• /
• 2008

The purpose of this study is to investigate the effects of changing air temperature and the changing on/off periods of the air-conditioner system. Adding to that, this paper discuss is to consider the effects of air temperature with the air-conditioner system upon the human thermal comfort. The experiment is conducted during the summer. The subjects(6 young females) are exposed to the following conditions: combinations of 2 Swing and 2 Linear air control Conditions. (2 Swing during 40 min, 4 Swing during 40 min, Linear 40 min, Linear 60 min in still air and RH 50%). From the experiment, the following results are obtained; the thermal sensation vote is neutral after 90 minute. The mean skin temperature ranged about $34^{\circ}C$ at all conditions. The skin temperature was greatly affected by 2 Swing big amplitude condition.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1991년도 추계 학술대회지
• /
• pp.12-13
• /
• 1991

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 봄 학술발표회 논문집
• /
• pp.227-232
• /
• 1994

Recently, TBM (Tunnel Boring Machince) method for a tunnel construction in domestic is very promisible due to shorten a constrution period. It is very important to increase the efficiency of the shotcrete for the TBM. The major factors influencing the efficienty of shotcrete are materials, mix disign, constrution conditions and skill of nozzle-man. In this paper, first, optimum synthesize conditions for the shotcrete accelerators was explored and early stiffenting mechanisms also studied. Second, TBM method was applied for a real job site using the optimum conditions obtained from a lab scale experiment.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.74-84
• /
• 1996

Characteristic boundary conditions are discussed in conjunction with a flux-difference splitting formulation as modified from Roe's linearization. Details of how one can implement the characteristic boundary conditions which are compatible with the discrete formulation at interior points are given for different types of boundaries including subsonic outflow and adiabatic wall. The latter conditions are demonstrated through computation of supersonic ogive-cylinder flow at high angle of attack and the computed wall pressure distribution is compared with experiment.

• 한국환경농학회지
• /
• 제22권4호
• /
• pp.261-265
• /
• 2003

감자의 가공품질에 영향을 미치는 토양 및 기상조건을 구명하기 위하여 국내 주요 감자재배 지역 7곳에 1994년부터 1995년까지 2년에 걸쳐 각 지역별 $2{\sim}3$개 농가에서 감자를 재배하였으며, 각 재배포장의 토양시료 채취 및 괴경을 수확하였다. 지역별 감자 괴경의 가공품질 차이의 원인을 구명키 위하여 토양분석과 수확일 기준으로 수확전 $70{\sim}10$일 사이의 기상조건을 10일 간격으로 조사하였으며, 수확된 괴경의 가공품질과 이들 요인과의 상관계수를 계산하였다. 시험결과, 감자의 가공품질은 토양의 화학적 특성 중에서 토양내 유기물 함량과 높은 상관계수를 보였다. 또한 기상조건과 관련하여 수확전 $30{\sim}10$일 사이의 최저온도가 낮으며, 일조시간이 많을 수록 감자의 가공품질이 향상되었다. 또한 이들 상관관계가 높은 요인들을 대상으로 가공품질 요인에 대한 다중회귀식을 구한 결과 괴경건물율과 칩색도는 비교적 높은 결정계수를 보여주었다. 따라서 우리나라에서 고품질의 가공원료 생산을 위한 적지 선정에 있어 토양중의 유기물 함량과 그 지역의 최저온도 및 일조시간 등이 고려되어야 할 것으로 생각된다.

• Nuclear Engineering and Technology
• /
• 제38권5호
• /
• pp.411-416
• /
• 2006

The Advanced Test Reactor (ATR), at the Idaho National Laboratory (INL), is one of the world's premier test reactors for providing the capability for studying the effects of intense neutron and gamma radiation on reactor materials and fuels. The physical configuration of the ATR, a 4-leaf clover shape, allows the reactor to be operated at different power levels in the comer 'lobes' to allow for different testing conditions for multiple simultaneous experiments. The combination of high flux (maximum thermal neutron fluxes of 1E15 neutrons per square centimeter per second and maximum fast [E>1.0 MeV] neutron fluxes of 5E14 neutrons per square centimeter per second) and large test volumes (up to 122 cm long and 12.7 cm diameter) provide unique testing opportunities. The current experiments in the ATR are for a variety of test sponsors - US government, foreign governments, private researchers, and commercial companies needing neutron irradiation services. There are three basic types of test configurations in the ATR. The simplest configuration is the sealed static capsule, which places the capsule in direct contact with the primary coolant. The next level of experiment complexity is an instrumented lead experiment, which allows for active control of experiment conditions during the irradiation. The most complex experiment is the pressurized water loop, in which the test sample can be subjected to the exact environment of a pressurized water reactor. For future research, some ATR modifications and enhancements are currently planned. This paper provides more details on some of the ATR capabilities, key design features, experiments, and future plans.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.48-52
• /
• 2019

As the consumer market in the mold, automation and aerospace industries grows, the demand for chemical machining using on electrochemical polishing increases. To enhance the surface roughness and gloss of the micro-needle, we have studied for an electrochemical polishing. Electrochemical polishing requires the chemical reaction of solution and material according to the electrolyte and electrode. In this study, sulfuric acid(30%), phosphoric acid(50%), and DI-water(20%)were used as the electrolytic solution, and the electrolytic solution temperature used $58^{\circ}C$. Electrochemical polishing was carried out in experimental conditions, and the micro-needle experiment was carried out from the basic experiment to obtain the experimental conditions. Experimental results show that as the voltage and current increase, the surface roughness improved and the gloss is improved. So, the best result for this experiment was obtained in condition 6, which improved micro-needle.

• 한국표면공학회지
• /
• 제25권3호
• /
• pp.117-125
• /
• 1992

In the electrolysis process of zinc plating impurity ions must be removed from zinc chloride plating solution because it's harmful to the current efficiency and the purity of zinc plating. In this study using zinc ball as a prcipitant instead of zinc dust, the fundamental data for continuous cementation process was studied. Based upon two series of experiments that consist of batch experiment with cylindrical zinc specimen and continuous experiment with zinc balls, following results have been obtained. In the continuous experiment all impurity ions have been removed within 1 hour regardless of various experimental conditions.

• 한국해양학회지:바다
• /
• 제5권3호
• /
• pp.186-194
• /
• 2000

본 연구에서는 중규모 해양모형을 이용하여 주어진 한반도 주변 대기경계조건에 대한 해양모형의 반응을 연구하였다. 연구는 크게 스핀업(spin-up) 실험과 재현(reproduction) 실험으로 나뉘는데, 스핀업 실험은 해양모형을 스핀업시켜 기후학적 월평균 해양상태로 유도하는 실험으로 월평균 대기상태를 경계조건으로 하여 해양모형을 장기적분하였다. 재현 실험은 1980년${\sim}$1998년 동안(19년)의 한반도 주변 해역의 해양변동을 재현하고자 한 실험으로 이를 위하여 스핀업 마지막 해의 해양상태를 모형의 초기상태로 하고 그 기간 동안의 월평균 기상 자료를 경계조건으로 해양모형에 적용하여 19년간 적분하였다. 스핀업 실험에서 모형은 동해지역에서의 동한 해류의 이안, 극전선대(polar front)형성 그리고 소규모 에디들에 의한 냉수대의 형성과 황해지역에서의 연안역과 중앙부 사이에 남북으로 형성되는 수온전선 대 그리고 역풍류(Upwind Current)의 변화에 기인한 순환 구조의 계절적인 변동 등 한반도 주변해역에서 나타나는 특징적인 순환들을 잘 모사하였다. 또한 1982${\sim}$98년까지에 대한 재현 실험에서는 주어진 대기 경계조건에 따른 해면온도의 변동성과 기간동안 약 0.5$^{\circ}$C의 해면온도 아노말리의 상승을 관측과 유사하게 모사하였다. 따라서 실험은 모형이 주어진 경계조건에 대하여 해양의 평균적인 상태 뿐만 아니라 변동성도 잘 모사하고 있음을 보여주었다.