• 제목/요약/키워드: expected value

검색결과 3,487건 처리시간 0.041초

한국의 초록서비스에 대하여 (Abstracting Services in Korea)

  • 최성진
    • 한국문헌정보학회지
    • /
    • 제24권
    • /
    • pp.9-51
    • /
    • 1993
  • The purpose of this study is twofold: to investigate into general characteristics of the abstracting services in Korea and to discuss general directions of development of the abstracting services in the country. This study is designed to achieve the purpose by gathering and analysing data related to the abstracting journals published in the past ten years and by comparing the results with similar data gathered by the investigator in 1984. The major conclusions made in this study is summarised as follows. (1) Researchers and professionals working in limited numbers of subject fields are benefited by abstracting services of recent achievements in research and development in Korea. Those in most of the fields have essentially no abstracting services of such achievements. Even many researchers and professionals in the limited numbers of the fields that have some elementary abstracting services are not informed of research results in their fields because the abstracting journals are scattered in many narrow subjects and in many cases, the abstracting journals only cover publications in some specific forms and kinds. (2) Abstracting journals of general subjects, which are supposed to be of more or less help to the researchers in the subject fields that have no abstracting journals of their own, have rapidly increased in number in the past ten years. Most of such abstracting journals carry thesis and dissertation abstracts, and the rest those of research papers published in specific places, in specific forms, by specific institutes, and of reports of research projects sponsored by specific foundations. These abstracting journals are not of the kind that comprehensively provide general readers with current awareness of publications of research results in Korea. (3) Most of the abstracting journals existing in Korea are published by institutions of higher education and research institutes, and the rest by commercial publishers, industrial firms, libraries, information centers, government agencies, research foundations, learned societies, etc. Those which publish many titles are small in number and those publish one or two titles are large in number. The former is largely made up of institutions of higher education and research institutes. (4) Ten years ago, there was not a single publishing house that produced abstracting journals. Three commercial publishing houses now produce abstracting journals. As this change occurs, centers of excellence are founded and competitive elements are introduced in abstracting services. This change, in turn, is expected to improve quality of the other abstracting journals in Korea. (5) The abstracting journals published in Korea are classified by type into those of dissertations, research papers, journal articles, patent specifications in that descending order. The fact that Master's and doctoral dissertation abstracts are dominating in Korea is due to the irrational practice of publishing those abstracts at many institutions. (6) Most of the abstracting journals existing in Korea are published by national or government-supported research institutes in order to publicise their own research outputs. Their coverage of literature is normally narrow, and naturally their value to users is limited. (7) The abstracting journals published in Korea increased in number at the rate of $77.8-100\%$ every five years in the past twenty-five years. Most of the abstracting journals that ceased to be published during the period survived for two years. (8) Korean is the desirable language for the abstracting journals designed to be distributed within Korea. About half of the abstracting journals published in Korea is printed in Korean and the other half in foreign languages, and in Korean with foreign languages. All the abstracting journals in foreign languages are printed in English xcept one, which is printed in Japanese. (9) Some twenty percent of the abstracting journals in Korea is published monthly, bimonthly, and quarterly. Others are published annually, biannually, and irregularly. The latter may not function properly as a current-awareness tool due to long intervals between their issues. It is particularly undesirable that about half of the abstracting journals in Korea is published irregularly. Most of the abstracting journals published in Korea are distributed freely to individuals and institutions selected by the publishers. (10) The abstracting journals published by the use of computers increased drastically in the past ten years. The abstracting journals produced by the conventional type-setting method will probably disappear In Korea in another ten years to come. Automation of the production of abstracting journals does not simply mean technical, economic improvement of publishing processes but availability of machine-readable databases that can be used for other purposes, including the generation of other publications and the provision of machine literature searching capabilities. Necessary steps should be taken for this important development that is occurring in the abstracting services in Korea.

  • PDF

Real-time PCR 분석법을 이용한 옥돔과 옥두어의 종 판별법 개발 (Development and Validation of Real-time PCR to Determine Branchiostegus japonicus and B. albus Species Based on Mitochondrial DNA)

  • 정인영;서용배;양지영;김군도
    • 생명과학회지
    • /
    • 제27권11호
    • /
    • pp.1331-1339
    • /
    • 2017
  • 미토콘드리아 게놈에 존재하는 시토크롬C 산화효소 서브유닛 I (cytochrome C oxidase subunit I, COI) 유전자의 DNA 염기서열을 기반으로 하는 종 판별은 수산물 자원의 지속적인 개발과 어류 다양성 보존을 위해 폭넓게 적용되고 있다. 본 연구에서는 한국에서 소비되는 옥돔과 가짜 옥돔으로 둔갑하는 옥두어의 종 판별을 위한 분석법을 개발하였다. 옥돔과 옥두어, 두 종의 종 판별과 검증을 위해 미토콘드리아 게놈의 DNA 염기서열 차이를 이용하여 real-time PCR법에 의해 분석하였다. 미토콘드리아 DNA 서열의 생물정복학적 분석에서 옥돔과 형태학적 옥돔 유사종인 옥두어, 두 종 사이에 COI 유전자 내에서 상당히 유사한 DNA 서열 부분과 일부 서열 변화 부분이 확인되었다. 명확하게 종 판별을 하기 위해 COI 유전자 내에서 일부 변화된 서열에서 종 특이적 프라이머를 디자인하였다. 10 개체의 옥돔과 옥두어에서 게놈 DNA을 추출하여 옥돔과 옥두어의 종 특이적 프라이머를 이용하여 real-time PCR 시스템에 의해 분석되었다. 이러한 real-time PCR 시스템을 이용한 genomic DNA 기반의 분자 기술은 동물 조직의 분류학적 분류를 위한 신뢰할 수 있는 방법을 제공한다. 옥돔판별을 위해, 옥돔 DNA에서 옥돔 종 특이적 프라이머를 이용한 Ct 평균값($21.85{\pm}3.599$)과 옥두어 DNA에서 옥돔 종 특이 프라아머를 이용한 Ct 평균값($33.49{\pm}1.183$) 차이를 나타내었다. 그리고 옥두어판별을 위해, 옥두어 DNA에서 옥두어 종 특이적 프라이머를 이용한 Ct 평균값($22.49{\pm}0.908$)과 옥돔 DNA에서 옥두어 종 특이 프라아머를 이용한 Ct 평균값($33.93{\pm}0.479$)을 통해 옥돔과 옥두어의 각 종 특이 프라이머의 효율성, 특이성 및 교차 반응성 측정은 통계적으로 유의한 차이를 보여 주었다. 제안된 방법은 10개의 상용 샘플로 검증이 되었다. 따라서, threshold cycle (Ct) value와 같은 real-time PCR 결과 분석에 의해 종 판별이 가능하였다.

지하주차장 리모델링 공사시 주동진입방법 선정 모델 개발 (The Development of a Model for Selecting Method of Entry for Apartment in Remodeling an Underground Parking Lot)

  • 송낙현;정인수;이찬식
    • 한국건설관리학회논문집
    • /
    • 제10권2호
    • /
    • pp.65-74
    • /
    • 2009
  • 20년 이상 경과된 노후 공동주택의 세대수는 향후 10년 이내에 350만 세대 이상으로 급격히 증가될 전망이고 이에 대한 대책으로 리모델링이 활성화되고 있다. 주차장확대는 리모델링에 대한 요구사항 중 큰 비중을 차지하고 있다. 주차장확대 중 지하주차장에서 공동주택의 주동으로 진입하는 방법(이하 '주동진입방법'이라고 함)은 기존 엘리베이터의 수직 확장, 주차공간의 대소, 공사기간과 공사비 등에 매우 큰 영향을 미친다. 그러나 공동주택의 지하주차장 확대 시 단지특성, 주동과 주차장의 연계성, 주민의 요구 등에 대한 정확한 평가 없이 경험적인 방법으로 주동진입방법이 결정되고 있다. 이러한 문제를 해결하기 위해서는 체계적이고 합리적인 방법과 절차에 따라 주동진입방법을 선정하여 지하주차장을 확대할 필요가 있다. 본 연구에서는 합리적인 의사결정을 위해 '지하주차장 리모델링 공사시 주동진입방법 선정 모델'을 제시하였다. 연구방법은 주차장확대 방식과 주동진입방법에 대해 조사하였다. 조사된 자료를 바탕으로 전문가들과의 심층면담을 통해 주동진입방법별 특징을 분석하였고 주동진입방법 선정 영향요인을 도출하였다. 영향요인은 시공성, 편의성, 경제성이 도출되었다. 그 후 AHP기법을 적용하여 선정된 영향요인에 대한 가중치를 산정하였다. 가중치 산정 결과 편의성이 가장 높은 값을 받아 주동 진입방법 선정에 제일 중요한 고려사항임을 밝혔다. 또 리모델링이 가능한 단지를 선정하여 주동진입방법별 현장적용성을 평가한 후 단지에 가장 적합한 주동진입방법을 제시하였다. 본 연구는 노후공동주택의 지하주차장 리모델링 공사시 주동진입방법 선택을 위한 참고자료로 활용될 것이다.

사업장 보건관리 사업의 형태별 수행성과 분석 -비용편익 분석을 중심으로- (Performance of Occupational Health Services by Type of Service : Cost Benefit Analysis)

  • 조동란;김화중
    • 한국직업건강간호학회지
    • /
    • 제4권호
    • /
    • pp.5-29
    • /
    • 1995
  • Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.

  • PDF

소아 영양 및 유아식 응용을 위한 신바이오틱스의 잠재력: 총설 (Potentials of Synbiotics for Pediatric Nutrition and Baby Food Applications: A Review)

  • 정후길;김선진;석민정;차현아;윤슬기;이나현;강경진
    • Journal of Dairy Science and Biotechnology
    • /
    • 제33권2호
    • /
    • pp.111-118
    • /
    • 2015
  • 프로바이오틱스, 프리바이오틱스 및 신바이오틱스 등의 물질과 미생물을 조제분유에 강화하여 건강증진 기능성 유산균, 특히 비피더스균과 유산간균의 성장을 선택적으로 자극함으로써 장내균총에 유익한 효과를 나타내고자 하는 노력이 경주되고 있다. 지난 10년 동안, 모유 수유가 장내균총에 미치는 유용 효과를 도모하기 위해서 프로바이오틱스와 프리바이오틱스를 함유하는 새로운 신바이오틱 조제분유가 제안되었다. 새로운 신바이오틱스는 상승 효과로 인해서 프로바이오틱스 및 프리바이오틱스를 개별적으로 사용하는 경우 보다 더 도움이 되는 것으로 기대된다. 한편, 조제분유 및 건조 제품의 제조에 사용되는 가공 기술 및 저장 조건 등이 프로바이오틱스의 생존에 악영향을 미치게 된다. 충분한 유산균수($10^8cfu/g$)로 장내 예정된 부위에 도달하여 숙주에 긍정적인 효과를 나타내기 위해서는 식품 제조공정 및 위장관 통과 시 프로바이오틱스의 생존성을 유지하는 것이 가장 중요한 요소이다. 일반적으로 안전하다고 인정되며, 높은 생물학적 가치를 가지고 있는 물질을 이용하여 적절하고 비용 효율적인 마이크로캡슐화 기술이 개발되면 조제분유의 품질 향상이 가능하게 된다. 프로바이오틱스는 복합적인 효과를 나타낸다. 하나는 살아 있는 생균체가 장내균총에 유익하게 영향을 미쳐 면역조절 효과를 보여주는 것이며, 다른 하나는 사균체가 항-염증 반응을 나타내는 것이다. 최근에, 사균체 또는 정제되지 않은 미생물 분획물이 건강에 긍정적인 영향을 미친다는 것을 명확하게 정의할 새로운 용어에 대한 필요성이 대두되었다. 그 결과, 충분한 양을 경구 또는 국소적으로 투여했을 때 인간과 동물에게 이로운 작용을 하는 사균체(손상되지 않거나 또는 파손된)나 정제되지 않은 세포 추출물(즉, 복잡한 화학적 조성)을 정의하기 위해 paraprobiotics라는 용어가 제안되었다. 프로바이오틱 균주 또는 프리바이오틱스를 조제분유에 강화했을 때 조제분유 수유아의 분변 미생물균총이 조정된다. 즉, 비피더스균 및 유산간균과 같은 건강 유익한 세균을 증가 시킴으로써, 프리바이오틱스는 분변 미생물균총의 조성을 변경하고, 이에 따라서 면역계의 활성을 조절한다. 따라서, 품질 향상을 위한 조제분유의 개발은 토착 장내균총의 대사 활성과 증식을 선택적으로 자극하는 비피더스균 등의 특정 프로바이오틱스 및 이눌린과 올리고당 등의 프리바이오틱스를 사용하여, 모유의 건강 유용 효과와 유사하게 접근하는 것에 초점을 맞추고 있다.

  • PDF

RAW264.7 대식세포에서 장대나물 추출물의 Nitric oxide 및 Prostaglandin E2생성 저해효과 (Inhibitory Effects of Extracts from Arabis glabra on Lipopolysaccharide Induced Nitric Oxide and Prostaglandin E2 Production in RAW264.7 Macrophages)

  • 남정환;서종택;김율호;김기덕;유동림;이종남;홍수영;김수정;손황배;김현삼;김보성;신지선;이경태;박희준
    • 한국자원식물학회지
    • /
    • 제28권5호
    • /
    • pp.568-573
    • /
    • 2015
  • 본 연구에서는 장대나물(Arabis glabra)의 전초를 이용하여 세포독성 및 항염증 활성 효과를 평가하였다. 대식세포인 RAW264.7 cell에서 염증 매개 물질인 lipopo-lysacchride (LPS)로 염증을 유발시켜 nitric oxide (NO)와 prostaglandi nE2 (PGE2) 같은 염증 유발인자들의 억제효과를 확인하였다. 장대나물의 hexane과 chloroform 분획물의 염증 유발인자 억제 시 IC50 value를 측정하였을 때 nitric oxide 및 prostaglandin E2 생성을 농도의존적으로 현저하게 저해하는 농도는 각각 21.0과 18.0 ㎍/㎖였다. 따라서 본 연구 결과는 장대나물의 hexane, chloroform과 같은 비극성용매 분획물들이 유의성 있는 항염증 효과를 나타내었으며, 이러한 효능은 예방의학적 가능성을 충분히 가지고 있기에 염증성질환의 예방을 위한 건강 기능성식품의 개발 가능성을 제시할 수 있을 것으로 기대된다. 또한 염증과 관련된 사이토카인 및 단백질 발현 메커니즘에 대한 추가적인 연구가 필요할 것으로 판단된다.

매립지 정비에 의한 순환이용 가능량 산정 사례 연구 (A Case Study on the Estimation of the Resource Recovery Potentials by Landfill Mining)

  • 이소라;이우진;이영준
    • 유기물자원화
    • /
    • 제26권1호
    • /
    • pp.5-12
    • /
    • 2018
  • 최근 지자체에서는 매립지 사용에 관한 갈등과 사용종료 시점을 앞두고 논란이 이는 사례가 늘고 있으며, 대체 매립지 마련이나 기존 매립지의 수명연장 합의를 이끄는데 난항을 겪고 있다. 이에 본 연구는 매립지 정비를 통하여 기 매립된 폐기물과 향후 매립될 폐기물의 순환이용 가능량을 산정하고, 매립지의 용량을 확보하도록 기여하는 데에 그 목적이 있다. 이를 위해 부피증가율, 중량비, 겉보기밀도를 주요 파라미터로 결정하고, 기존 사업 사례를 통해 그 값을 산정하였다. 기존 사업 지역(아산시, 예천군, 안동시)에서의 부피증가율의 평균값은 1.42로 산정되었다. 중량비의 경우 세 지역의 토사류 평균값은 45.6%로 산정되었고, 가연성 폐기물과 불연성 폐기물의 비율은 "전국 폐기물 발생 및 처리 현황" 통계자료를 활용할 수 있도록 산정 방법론을 제시하였다. 겉보기밀도는 두 지역 평균값을 이용하였으며 가연성, 불연성, 토사류별로 각각 0.35톤/$m^3$, 1.40톤/$m^3$, 1.58톤/$m^3$으로 산정되었다. 본 연구에서 산정된 주요 파라미터들과 제시된 방법론을 통해 사례 연구로 청주매립지의 순환이용 가능량을 분석하였다. 기 매립된 폐기물을 정비하여 순환이용함으로써 새로 확보될 매립용량은 기존 매립지 용량 대비 45%에 해당되었다. 또한 매년 반입되는 물량을 선별하여 가연성분은 에너지화하고, 소각재, 불연성 및 토사류만 재매립할 경우 청주시의 매립지 사용연한이 20년 증가되는 것으로 분석되었다. 향후 본 연구에서 구축한 방법론은 특정 매립지를 선정하여 순환이용 하고자 할 때 기초자료로 활용될 수 있을 것으로 기대된다.

CSOs처리를 위한 응집침전시스템에서 슬러지 반송에 의한 고형물 처리효율평가 (An Evaluation of Solid Removal Efficiency in Coagulation System for Treating Combined Sewer Overflows by Return Sludge)

  • 하성룡;이승철
    • 대한환경공학회지
    • /
    • 제35권3호
    • /
    • pp.171-178
    • /
    • 2013
  • 본 연구는 CSOs의 처리를 위해 개발된 응집침전시스템의 운전초기에 발생하는 침전슬러지를 응집반응조에 반송하였다. 슬러지 반송을 통해 생성되는 플록의 형성특성 및 침전특성을 분석하고, CSOs 유입초기의 고농도 입자성 물질이 가중응집제로 활용될 수 있는지 그 가능성을 평가하고자 하였다. 그 결과, CSOs는 유입초기 고농도의 오염물질을 포함하며, 특히 20 ${\mu}m$ 이상의 입자성 물질이 다량 유입되었다. 응집침전시스템을 통해 처리된 유출수는 고농도의 오염물질이 유입되는 시기에는 처리수질이 낮아졌으나, 이후 유입오염물질의 농도가 감소되는 시점에서는 처리수질이 증가하는 현상을 보였다. 슬러지반송 운전에서 생성되는 플록은 마이크로샌드를 주입한 플록에 비해 크기는 비슷하고, 침강속도는 55.1 cm/min에서 21.5 cm/min으로 감소하였다. 반송에 사용되는 침전조 하부에 축적된 슬러지의 SVI값은 72로 침강성이 양호하였으며, 침전된 슬러지가 압밀침전으로 인해 부피가 급격히 감소하는데 걸리는 시간은 10분 정도로 분석되었다. 반송슬러지는 인발 0.3%에 반송 0.1%의 조건에서 지속적인 슬러지 발생에 따른 침전과 인발의 균형이 형성되는 것으로 분석되었으며, 이때, 응집반응조의 평균 TS농도는 100~200 mg/L, VS농도는 50~100 mg/L 정도를 유지하도록 슬러지를 반송하는 것이 적절한 것으로 분석되었다. CSOs의 입자성물질을 함유한 슬러지의 반송은 유입수질의 변화에 대응하여 안정적인 처리수의 수질을 확보할 수 있고, 약품주입량의 감소와 함께 슬러지 발생량의 감소효과를 기대할 수 있다.

KODISA 연구윤리의 표절 판단기준과 글로벌 학술지 가이드라인 (The Standard of Judgement on Plagiarism in Research Ethics and the Guideline of Global Journals for KODISA)

  • 황희중;김동호;윤명길;이정완;이종호
    • 유통과학연구
    • /
    • 제12권6호
    • /
    • pp.15-20
    • /
    • 2014
  • Purpose - In general, researchers try to abide by the code of research ethics, but many of them are not fully aware of plagiarism, unintentionally committing the research misconduct when they write a research paper. This research aims to introduce researchers a clear and easy guideline at a conference, which helps researchers avoid accidental plagiarism by addressing the issue. This research is expected to contribute building a climate and encouraging creative research among scholars. Research design, data, methodology & Results - Plagiarism is considered a sort of research misconduct along with fabrication and falsification. It is defined as an improper usage of another author's ideas, language, process, or results without giving appropriate credit. Plagiarism has nothing to do with examining the truth or accessing value of research data, process, or results. Plagiarism is determined based on whether a research corresponds to widely-used research ethics, containing proper citations. Within academia, plagiarism goes beyond the legal boundary, encompassing any kind of intentional wrongful appropriation of a research, which was created by another researchers. In summary, the definition of plagiarism is to steal other people's creative idea, research model, hypotheses, methods, definition, variables, images, tables and graphs, and use them without reasonable attribution to their true sources. There are various types of plagiarism. Some people assort plagiarism into idea plagiarism, text plagiarism, mosaic plagiarism, and idea distortion. Others view that plagiarism includes uncredited usage of another person's work without appropriate citations, self-plagiarism (using a part of a researcher's own previous research without proper citations), duplicate publication (publishing a researcher's own previous work with a different title), unethical citation (using quoted parts of another person's research without proper citations as if the parts are being cited by the current author). When an author wants to cite a part that was previously drawn from another source the author is supposed to reveal that the part is re-cited. If it is hard to state all the sources the author is allowed to mention the original source only. Today, various disciplines are developing their own measures to address these plagiarism issues, especially duplicate publications, by requiring researchers to clearly reveal true sources when they refer to any other research. Conclusions - Research misconducts including plagiarism have broad and unclear boundaries which allow ambiguous definitions and diverse interpretations. It seems difficult for researchers to have clear understandings of ways to avoid plagiarism and how to cite other's works properly. However, if guidelines are developed to detect and avoid plagiarism considering characteristics of each discipline (For example, social science and natural sciences might be able to have different standards on plagiarism.) and shared among researchers they will likely have a consensus and understanding regarding the issue. Particularly, since duplicate publications has frequently appeared more than plagiarism, academic institutions will need to provide pre-warning and screening in evaluation processes in order to reduce mistakes of researchers and to prevent duplicate publications. What is critical for researchers is to clearly reveal the true sources based on the common citation rules and to only borrow necessary amounts of others' research.

단경간 2련 강박스 거더 곡선교의 사각에 따른 부반력 특성 (Negative Support Reactions of the Single Span Twin-Steel Box Girder Curved Bridges with Skew Angles)

  • 박창민;이형준
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권4호
    • /
    • pp.34-43
    • /
    • 2012
  • 도로의 진출입로나 인터체인지에 널이 적용되고 있는 곡선교는 곡선반경, 사각 및 받침 간격 등에 따라 직선교보다 복잡한 거동을 나타낸다. 특히 상부구조물의 휨과 비틀림에 의해 솟음현상이 발생할 수 있고, 예각부 받침에는 부반력이 발생할 수 있다. 본 연구에서는 곡선교에서 교량의 곡선반경, 받침간격 및 사각이 부반력에 미치는 영향에 대해 분석하였다. 이를 위해 RAMP에 적용 가능한 지간(L)이 50m인 단경간의 강박스거더 곡선교를 대상으로 3차원 격자구조 모델을 이용하여 해석적인 방법으로 지점반력을 산출하였다. 부반력은 교량의 평면형상, 구조계의 형성, 받침의 조건 등에 의해 그 크기가 결정 되므로 매개변수는 곡선반경, 사각 및 받침간격으로 하였으며, 도로교설계기준에 제시된 하중조합에 의해 발생되는 반력의 크기를 계산하였다. 수치해석한 결과에 의하면 부반력은 곡선반경, 받침간격 및 사각이 작을수록 크게 발생하는 것으로 나타났으며, 사각 $60^{\circ}$ 일때 곡선반경 250m 이하에서는 받침간격에 관계없이 항상 부반력이 발생하였고, 사각 $75^{\circ}$일 때 곡선반경 180m에서는 ${\theta}/B$가 0.27 이하, 곡선반경 250m에서는 ${\theta}/B$가 0.32 이하에서 부반력이 발생하지 않았으며, 사각 $90^{\circ}$ 일 때 곡선반경 130m에서는 ${\theta}/B$가 0.38 이하 일 때와 곡선반경이 180m 이상일 때 부반력이 발생하지 않았다. 이상의 결과로부터 설계변수인 곡선반경, 받침간격 및 사각이 곡선교에서 부반력 발생과 밀접한 관계가 있음을 확인하였고, 곡선교의 설계시 설계변수들의 상호관계를 적절히 설정하면 부반력이 발생하지 않는 구조계로 설계가 가능함을 알 수 있었다.