• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.229-242
• /
• 1994

The objective of the study is to know demographic characteristics mobility motivation housing aspiration and housing values of expected purchasers of the small/medium size apartments located at 'H-area' in Ulsan to enhance their level of housing satisfaction through better planning. The result shows that moving motivation housing aspiration and housing values differ as what size respective expected purchasers want. As a regional characteristic the reality-oriented view of housing is apparent in that their interests are focused on the setups or facilities after-service and maintenance and that they think conveniency more important than the edifices' appearance or beauty.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1439-1449
• /
• 2007

The challenging aspect of CWR (continuous welded rail) is the additional axial forces in rails, mainly due to the thermal expansion of steel plate girder and rail itself. It has been found that these axial forces are proportional to girder length, total bridge length and bolt tightening forces. Also these forces are dependent to girder support conditions, types of bearings and their arrangements. With CWR, the authors' previous studies show that performance improvements like noise reduce, fatigue resistances and bearing durability increment can be expected. In addition to these effects, secondary effects due to the semi integral behavior between rail and bridge girder also can be expected. Special bearings which can reduce the absolute maximum axial forces have been developed, and applied to real 100m span bridge. The performance improvements were verified through site measurements and numerical analysis. The purpose of this study is to confirm the expected performance improvement aspects of steel plate girder bridges with CWR. To verify these aspects, girder stiffness changes, rail axial force changes, girder displacements and noise level were thoroughly measured and compared.

• Asia pacific journal of information systems
• /
• v.21 no.4
• /
• pp.27-43
• /
• 2011

This article explores economic models that show the optimal level of information security investment in the presence of interdependent security risks, Using particular functional forms, the analysis shows that the relationship between the levels of security vulnerability and the levels of optimal security investments is affected by externalities caused by agents' correlated security risks. This article further illustrates that, compared to security investments in the situation of independent security risks, in order to maximize the expected benefits from security investments, an agent should invest a larger fraction of the expected loss from a security breach in the case of negative externalities, while an agent should spend a smaller fraction of the expected loss in the case of negative externalities.

• Structural Engineering and Mechanics
• /
• v.37 no.3
• /
• pp.257-265
• /
• 2011

Plant-specific analyses of 5 types of domestic reactors in Korea are performed to assure the structural integrity of the reactor pressure vessel (RPV) during transients which are expected to initiate pressurized thermal shock (PTS) events. The failure probability of the RPV due to PTS is obtained by performing probabilistic fracture mechanics analysis. The through-wall cracking frequency is calculated and compared to the acceptance criterion. Considering the fluence at the end of life expected by surveillance test, the sufficient safety margin is expected for the structural integrity of all reactor pressure vessels except for the oldest one during the pressurized thermal shock events. If the flaw with aspect ratio of 1/12 is considered to eliminate the conservatism, the acceptance criteria is not exceeded for all plants until the fluence level of $8{\times}10^{19}\;n/cm^2$, generating sufficient margin beyond the design life.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.201-210
• /
• 2001

In this study, large-scale distributed design approach for a life cycle cost (LCC) optimization of steel box girder bridges was implemented. A collaborative optimization approach is one of the multidisciplinary design optimization approaches and it has been proven to be best suited for distributed design environment. The problem of optimum LCC design of steel box girder bridges is formulated as that of minimization of the expected total LCC that consists of initial cost maintenance cost expected retrofit costs for strength, deflection and crack. To discuss the possibility of the application for the collaborative optimization of steel box girder bridges, the results of this algorithm are compared with those of single level algorithm. From the numerical investigations, the collaborative optimization approach proposed in this study may be expected to be new concepts and design methodologies associated with the LCC approach.

• Management & Information Systems Review
• /
• v.37 no.4
• /
• pp.195-217
• /
• 2018

Inaction inertia effect refers to the phenomenon wherein people who missed attractive opportunities in the past do not take any action when they are given the opportunity to receive discounts (sale). The main objective of this study was to find out how such inaction inertia effect influenced the expected regret from the action, expected regret from inaction, and purchase intention depending on the two types of consumption purposes-for pleasure and for practical use. As the personal disposition of each consumer differs from one another, it was expected that habitual purchase behavior and maximization behavior would influence the inaction inertia. An experiment was thus conducted by using a scenario to satisfy the objective of this study. Results showed that in the case of consumers whose consumption purpose was for pleasure, those who habitually purchased the same brand showed a higher level of expected regret from the action and expected regret from inaction. In the case of maximization behavior, no differences were found in the expected regret from the action between practical consumption purpose and pleasurable consumption purpose. On the other hand, differences were found in the level of expected regret from inaction, which is the case wherein consumers who missed their first opportunity to receive discounts (sale) did not make any purchase on their second opportunity for discounts (sale). Thus, inaction inertia was shown in accordance with habitual purchase behavior in the case of consumption purpose for pleasure, but it was not clearly shown in the case of consumption for practical use. This is because there is a relatively low level of justification on consumption, in the case of consumption for practical use. On the other hand, it was found that consumers with maximization behavior felt a stronger sense of regret in the case of their expected regret for inaction in consumption for practical use than in consumption for pleasure. Also, with regard to purchase intention, it turned out that only consumers with pleasurable consumption purpose had purchase intentions. Through these study results, it would be necessary to consider the consumption purpose behind the purchase of products or services, with regard to inaction inertia, depending on personal dispositions. In accordance with these study results, several theoretical and practical implications were discussed.

• Industrial Engineering and Management Systems
• /
• v.10 no.2
• /
• pp.97-103
• /
• 2011

This paper develops a technology level quantification (TLQ) model by utilizing a learning curve. Original learning curve shows the relationship between cumulative number of units and the required time for the unit. On the other hand, in our developed model, the technology level, such as speed of production and quality of the produced items, is expressed as a function of not cumulative number of units but time, for increasing generality. Furthermore, for expressing each learning that consists of conceptual learning and operational learning, S-curve is utilized in our developed model. By fitting the S-curve and/or decomposing into some activities, our TQL model can be applied to approximate organizational and complicated process. Some variations in time and levels, parameters of our developed model are shown. By using the parameters, the procedure to identify our developed model is proposed. Also, the influential factors for the parameters of our developed model are discussed with classifying the factors into technoware, infoware, humanware, and orgaware. The expected technology level is utilized for expecting the capacity of production system, and the expected capacity can be utilized in predicting various changes in the organization and deciding managerial decision about TT. A case study in manufacturing industry shows the effectiveness of the developed model.

• Nutrition Research and Practice
• /
• v.6 no.2
• /
• pp.146-154
• /
• 2012

The purposes of this study are to estimate the stress level of university students, and to verify the relationships between stress level and drinking behavior. A questionnaire survey was administered to 430 university students in the Gangwon area in Korea from November 5 to November 28, 2008, and data from 391 students were used for the final statistical analysis. The most stressful factor was "Worry about academic achievements" (2.86 by Likert-type 4 point scale). The subjects were divided into two groups, a low stress group (${\leq}65.0$) and a high stress group (${\geq}66.0$), by the mean value (65.1) and median value (66.0) of the stress levels. The drinking frequency was not different between the two stress groups, but the amount of alcohol consumption was significantly different ($P$ < 0.05). The portion of students reporting drinking "7 glasses or over" was higher in the lower stress group than in the higher stress group. In addition, factor 6, "Lack of learning ability", was negatively correlated with drinking frequency and the amount of alcohol consumption ($P$ < 0.05), and factor 3, "Worry about academic achievements", was negatively correlated with the amount of drinking ($P$ < 0.05). The major motive for drinking was "When overjoyed or there is something to celebrate" (2.62), and the main expected effect of drinking was "Drinking enables me to get together with people and shape my sociability" (2.73). The higher stress group showed significantly higher scores on several items in the categories of motives ($P$ < 0.01), negative experience ($P$ < 0.05), and expected effects ($P$ < 0.05) of drinking than the lower stress group. Our results imply that university students at the lower stress level may drink more from social motives in positive drinking environments, while those at the higher stress level may have more problematic-drinking despite their smaller amount of alcohol consumption.

• Journal of Nutrition and Health
• /
• v.30 no.10
• /
• pp.1180-1187
• /
• 1997

Cigarette smoking is a major risk factor of atherosclerosis and has been reported to contain an abundance of free radical species which could be expected to deplete antioxidants such as vitamin C . The present study was designed to investigate the relationship between smoking, plasma lipid and lipoprotein concentration, and plasma vitamin C level. Fifty-five healthy male smokers and 32 non-smokers were investigated in the study. Mean age, body weight , BMI and blood pressure made no differences in both smokers and non-smokers. Significantly, smokers has higher plasma total cholesterol and LDL-C , and lower HDL-C /LDL-C ratio compared with non-smokers. Plasma level of thiobartiturin acid reactive substances(TBARS), indicator of lipid peroxidation and increased susceptibility of LDL towards lipid perosidation, were elevated in smokers(p<0.001), while the plasma vitamin C level of smokers was significantly lower than that of non-smokers(p<0.05), indicating that elevated lipid peroxidation are associated with decreased plasma vitamin C content. In non-smokers a significantly positive correlation was observed between dietary vitamin C intake and plasma levels, but no such association observed in smokers. Lack of such a relationship and the decreased plasma vitamin C level in the smokers suggest that smoking may cause increased turnover of the plasma antioxidant. Consuquently, the sustained free radical load derived from smoking causes an imbalance in oxidant/antioxidant status and it could be expected that cigarette smoking renders plasma LDL more susceptible to oxidative modification . In the present study the possible explanations for that cigarette smokers have a higher risk of cardiovascular disease include the changes of blood lipid and lipoprotein concentration, and plasma vitamin C status which might have protective functions against free radicals -medaited lipid peroxidation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.353-366
• /
• 2021

Objectives: An appropriate level of cost support is being proposed to maximize the participation rate. In addition, as the amount of support is highly concentrated at the level of the limit under the current level of supports, the level of cost support is low when the actual level of cost of measuring the working environment exceeds the limit. This paper describes the adjustment of an appropriate cost support rate. Methods: First, this paper analyzes the current cost support status using data from the KOSHA. Second, an alternative for adjusting the cost support rate is presented in consideration of the incentive aspect. Third, we present simulation results for the average cost support rate, the impact of each alternative on finance, and more. Fourth, the most desirable adjustment method is presented after comparing and analyzing the results of various alternatives. Results: In this paper, we present a new scale model. This model is a mixture of flat-rate, fixed rate, and subside cap. It is expected that the new model will not only facilitate participation in businesses with low measurement costs, but also have the effect of controlling measurement costs for institutions that incur greater costs. It is also expected that setting a cap will have the effect of considering government finances and inducing excessively costly institutions to reduce costs. Thus, the new model is likely to be superior to others. If the fourth plan is applied to new businesses and the fifth plan is applied to sustainable businesses, the average cost support rates will be 87.68 percent and 65.18 percent, respectively, and the needed finances will be 2.5 billion won, 18.8 billion won, and 21.3 billion won in total. Conclusions: It seems most desirable to introduce a new model that combines flat-rate, fixed-rate, and subsidy cap systems and achieve an appropriate cost support rate through this model.