• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.404-408
• /
• 2003

This paper discusses the physical properties of permeable high quality concrete using blast furnace slag or steel slag as a part of aggregate. In the case of steel slag, aging treatment was adopted to prevent the volume expansion. With high range water reducing agent, the concrete using slag aggregate showed compressive strength up to 24MPa at the age of 28 days and the water permeability of the concrete was over the level of 0.1 m/s in this experiment. Also, there was no expansion problem in the concrete substituted with aged slag as a part of aggregate.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.577-584
• /
• 2007

The effect of steel microfibers (SMF) on alkali-silica reaction (ASR) was investigated using two types of reactive aggregates, crushed opal and a pyrex rod of constant diameter. Cracks are less visible in the SMF mortars compared with the unreinforced mortars. Due to crack growth resistance behavior in SMF mortar specimens, the strength loss is eliminated and the ASR products remained well confined within the ASR site. The expansion and the ASR products were characterized by microprobe analysis and inductively coupled plasma (ICP) spectroscopy. The confinement due to SMF resulted in a higher Na and Si ion concentration of the ASR liquid extracted from the reaction site. The higher concentration reduced the ASR rate and resulted in a lower reactivity of the reactive pyrex rods in SMF mortars.

• Computers and Concrete
• /
• v.16 no.3
• /
• pp.487-502
• /
• 2015

This study investigated particle expansion in basic oxygen furnace slag (BOF) and desulfurization slag (DSS) after heat curing by using the volume method. Concrete hydration was accelerated by heat curing. The compressive strength, ultrasonic pulse velocity, and resistivity of the concrete were analyzed. Maximum expansion occurred in the BOF and DSS samples containing 0.30-0.60 mm and 0.60-1.18 mm particles, respectively. Deterioration was more severe in the BOF samples. In the slag aggregates for the complete replacement of fine aggregate, severe fractures occurred in both the BOF and DSS samples. Scanning electron microscopy revealed excess CH after curing, which caused peripheral hydration products to become extruded, resulting in fracture.

• International Commerce and Information Review
• /
• v.19 no.3
• /
• pp.83-105
• /
• 2017

I tried to analyze export relation of influence in Chinese H beam(common steel), Hot Rolled Steel(common steel), Plate(common steel) which could be influenced immediately by China's cancellation of the export rebate of value added tax in 2010 through the statistic methods such as cointegration, Granger causality, impulse response and variance decomposition. In the first period they mutually influenced each other in export to Korea but in the second period, this relation of influence was lessoned. Due to production expansion of Hot Rolled Steel(common steel), Plate(common steel) in Korea, the change of import trend, the market change of steel users' industries and China's expedient export of boron steel to Korea, mutual influence among these products was greatly declined. Ever since Hyundai Steel's production expansion involving blast furnace facilities, there is need for the industry to concentrate on developing new markets for its facilities' output in Korea. Therefore, Korea's steel industry desperately needs strength of de-jure standards such as unique quality standards and related certifications, efficient distribution management, as well as export promotion strategy through its global trading network to effectively address its structural supply-demand imbalances.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1275-1276
• /
• 2012

• Structural Engineering and Mechanics
• /
• v.46 no.3
• /
• pp.371-385
• /
• 2013

Vibration isolators and anti-vibration mounts are ideal, for example, in creating floating floors for gymnasiums, or performance spaces. However, it is well-known that there are great difficulties on isolating vibration transmission in structural steel components, especially steel floors. Besides, the selection of inertia blocks, which are usually used by engineers as an effective vibration control measure, is usually based on crude methods or the experience of the engineers. Thus, no simple method or indices have been available for assessing the effect of inertia blocks on vibration isolation or stability of vibratory systems. Thus, the aims of this research are to provide further background description using a FE model and present and implement a modal approach, that was validated experimentally, the latter assisting in providing improved understanding of the vibration transmission phenomenon in steel buildings excited by a velocity-source type of excitation. A better visualization of the mean-square velocity distribution in the frequency domain is presented using the concept of modal expansion. Finally, the variation of the mean-square velocity with frequency, whilst varying mass and/or stiffness of the coupled system, is presented.

• IE interfaces
• /
• v.1 no.1
• /
• pp.27-37
• /
• 1988

In the multi-stage and multi-process plant, it is not an easy task to describe the interrelationships among each process and facility. The purpose of this simulation study is to analyze the effect of additional facilities on productivity in a steel mill. The simulation was performed using SLAM Simulation Language for Alternative Modeling. The results of this study was used by the plant engineers in making decisions on the expansion of the plate mill. The prediction of which process would cause bottle-necks enabled the plant engineers to invest most effectively.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.397-404
• /
• 2000

The research of the computer-aided analysis and design of steel structures has continuously evolved. Despite the importance of connection in steel structures, the design process of connections is inefficient in present. The purpose of this study is to help engineer in connection design process. In this paper, prototype of automatic connection design module in integrated system for steel structures is proposed. The main methodology is based on bottom-up approach to simplify and formalize product model. Expert system is used to help engineer for selecting steel connection type. Object-oriented analysis and modeling will improve the expansion of knowledge-base. The design for connection was done according to the design specifications of connections of AISC

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.105-108
• /
• 2001

In this paper, we evaluated the suitability of steel slag(is divided with electric arc furnace slag and converter slag) as concrete aggregate by measuring physical and chemical characteristics of it. The steel slag mainly contains SiO$_2$ and CaO as the chemical composition. The reaction with water and a little of free CaO in the slag causes slag's volume to expand. Therefore, we used several aging methods in order to decrease the characteristics of slag volume expansion. The physical properties of steel slag aggregate are researched and then the strength of concrete with the steel slag aggregate is measured.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.427-439
• /
• 2003

A previous study evaluated the seismic response of typical multi-span simply supported (MSSS) and multi-span continuous (MSC) steel-girder bridges in the central and southeastern United States. The results showed that the bridges were vulnerable to damage resulting from impact between decks, and large ductility demands on nonductile columns. Furthermore, fixed and expansion bearings were likely to fail during strong ground motion. In this paper, several retrofit measures to improve the seismic performance of typical multi-span simply supported and multi-span continuous steel girder bridges are evaluated, including the use of elastomeric bearings, lead-rubber bearings, and restrainer cables. It is determined that lead-rubber bearings are the most effective retrofit measure for reducing the seismic vulnerability of typical bridges. While isolation provided by elastomeric bearings limits the forces into the columns, the added flexibility results in pounding between decks in the MSSS steel-girder bridge. Restrainer cables, which are becoming a common retrofit measure, are only moderately effective in reducing the seismic vulnerability of MSSS and MSC steel girder bridges.