• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.305-306
• /
• 2023

지반 침하 및 액상화 등에 따른 과도한 상대변위로 인한 매립배관 시스템의 손상을 저감시키기 위해 종종 벨로우즈 신축이음관은 사용된다. 벨로우즈 신축이음관의 성형과정에서 회선의 벽두께 감소와 같은 구조적인 불확실성이 발생할 수 있으며 특히, 벽두께 감소는 벨로우즈 신축이음관의 성능에 영향을 미칠 수 있다. 매립배관 시스템의 효율적인 유지관리를 위해 회선의 벽두께 감소에 의한 벨로우즈 신축이음관의 성능평가는 필요하다. 하지만 회선의 벽두께 감소가 벨로우즈 신축이음관의 성능에 미치는 영향을 조사하는 연구는 미미하다. 따라서 본 연구는 기초적인 연구로써 고충실도 유한요소 모델을 이용하여 단조하중을 받는 벨로우즈 신축이음관의 벽두께 감소에 의한 성능을 평가하고 민감도 분석을 수행하였다. 각 회선의 벽두께 감소를 20%로 적용하였을 때 최대하중은 약 3% 감소하는 것으로 나타났으며 2번 회선의 벽두께 감소가 최대하중 감소에 비교적 큰 영향을 미치는 것으로 나타났다.

• Korea Trade Review
• /
• v.45 no.4
• /
• pp.83-93
• /
• 2020

Sanctions by the international community can increase their effectiveness with the participation of major countries with global economic influence, and can lead to efficient sanctions against the target countries when different sanctions procedures and methods can be operated in an integrated manner. To this end, it is being carried out with the aim of maximizing the performance of sanctions through collective economic solidarity by inducing international participation centered on the joint agenda, such as drawing up a resolution for sanctions. In this study, the definition and purpose of sanctions imposed by the international community and by major specific countries were explained and an empirical analysis was conducted on the economic impact of each sanctions, focusing on the United Nations Security Council and the United States, which directly implement them. Based on the selected research model, the effects of economic sanctions on the international community and countries subject to sanctions by certain countries were mutually compared and analyzed in the data. Finally, the conclusion obtained from this study was stated and the implications were derived and the possibility of further research expansion was described.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.10
• /
• pp.21-29
• /
• 2021

Most concrete gravity-type dams in and out of the country were constructed by column method to control cracks caused by concrete hydration heat generated during construction, resulting in a certain level of leakage after impoundment through various causes, such as contraction joints and construction joints. However, due to the characteristics of concrete structures that shrink and expand according to temperature, concrete dams have vertical joints and drains to allow penetration. PVC waterproof shows excellent effects in completion of the dam, which however increases the possibility of interfacial failure due to different thermal expansion. Other causes of penetration may include problems with quality control during installation, generation of cracks due to heat of hydration of concrete, waterproofing methods, etc. In the case of Bohyunsan Dam in Yeongcheon, North Gyeongsang Province, the amount of drainage in the gallery was checked and underwater, and it was confirmed that there are many penetrations from drainage holes connected to vertical joints, and that some of the PVC waterproofs are not fully operated. As a new method to prevent penetration through vertical joints, D.S.I.M. (Dam Sealing Innovation Method) developed by World E&C was applied to Bohyunsan Dam and checked the amount of drainage in the gallery. As a result of first testing three most leaking vertical joints, the drain in the gallery was reduced by 87% on the average and then applied to the remaining 13 locations, which showed a 83% reduction effect based on the total drain in the gallery. Summing up these results, it was found that D.S.I.M. preventing water leakage from the upstream face is a valid construction method to reduce the water see-through and penetration quantity seen in downstream faces of concrete dams. If D.S.I.M. is applied to other concrete dams at domestic and abroad, it is expected that it will be very effective to prevent water leakage through vertical joints that are visible from downstream faces.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.68-87
• /
• 2016

This research conducted a survey for total 166 teachers of schools so as to analyze validity and satisfaction for performance objectives of SMB administration subsidy the HRDP and the CEP in Specialized High School. The results of research are as follows. First, teachers recognize that purpose of HRDP is to expand employment of specialized high school and provide human resource of SMB. And, they recognize that HRDP is important to improve school outcomes and makes a positive effect on the improvement of school outcomes. Second, teachers recognize that objectives of HRDP are improvement of student's understanding for SMB, improvement of teacher's understanding for SMB, improvement of SMB's understanding of school, cultivation of student's occupational view, systematization of career guiding program based on employment process, strengthening of industry-academia cooperation education, improvement of the level of student's skill, fulfillment of workplace experience and practice focusing workplace learning, training of customized human resource for SMB, improvement of student's adaptation to the workplace, improvement of employment rate for SMB, expansion of job opportunities for students with SMB, preparation of the base of connection between school and SMB, publicity of school, expansion of opportunities to cooperate between SMB and school, establishment of cooperative system among industrial association and school, introduction and operation of the employment connective model for joint education and employment, strengthening of field professionalism of teachers. However, satisfaction for the achievement of objectives of HRDP except for strengthening of industry-academia cooperation education and improvement of employment rate for SMB is relatively lower than the validity. Third, teachers in charge of human resource training business of middle and small sized company's specialized high school recognize that objectives of CEP are expansion of job opportunities for students with SMB, excavation of good-quality SMB, expansion of opportunities to cooperate between SMB and school, fulfillment of workplace learning, improvement of student's major foundation and in-depth skill, improvement of literacy, math, teamwork and communication abilities for students' job performance, improvement of student's working attitude and student's proper career exploration decision. However, satisfaction for achievement of objectives of CEP is relatively lower than the validity.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.1
• /
• pp.105-136
• /
• 2016

This paper analyzed the qualitative evaluation indicators of the SYSTEM sector of the LINC program, which aimed at strengthening ability of regional universities through the activities of industry-academia cooperation (IAC). By using interview data and the program reports of universities, this research explored the problems of the indicators and suggested improvement measures which could lead to performance creativity. According to research results, in university system reform for activating IAC, some improvements are required as follows: limiting excessive expansion of IAC-friendly faculty evaluation; and evaluating soft aspects in the reform of academic affairs. In relation to strengthening of ability of the IAC organization, the indicators need to be amended as follows: enhancing the role of channel of IAC Foundation; strengthening the function of planning team of the IAC Foundation; and inducing development of own model of universities for IAC. As regards expansion of IAC infrastructure, it is necessary to enlarge the manpower who can develop programs of the support center in the foundation and to secure of operators for effective operation of joint-using equipments. Therefore, the indicators are required to be upgraded, considering these improvement direction.

• Journal of National Security and Military Science
• /
• s.8
• /
• pp.1-48
• /
• 2010

The purpose of this study is to examine and analyze the Untied Nations' efforts for peace on Korean peninsular after CCF's participation in Korean War. The Untied Nation tried to negotiate th peace plan between two sides from the end of 1950. Once the CCF's entry into the war had been confirmed, the war situation moved to a new phase, and the UN forces, which had guided the war in an effort to destroy the NKP A forces, and to punish North Korea, had to set up new guidelines to cope with the new situation. Accordingly, in late November, 1950, the UN forces camp, mainly the US Joint Chiefs of Staff and the United Nations Command, discussed various options, such as an expansion of the war up to the Chinese territory, a cease fire along the 38th Parallel, or a forced and inevitable evacuation. The Korean delegation to the UN insisted that "the unification of Korea should be achieved only by victory in the war. The Chinese intervention in the war is a Challenge to the UN in the same way as the North Korean invasion. The UN participation in the war was to repulse the invasion. With the same spirit we should drive back the Chinese Communists." The Korean delegation also emphasized to the friendly nations the political objective and will of unification, and that a cease fire at a threshold of unification might return us to the status quo ante bellum, and would be contrary to the Korean nation's desire. At that time, particularly, the US strongly considered the employment of nuclear weapons as one of the new strategies to cope with the Chinese invasion. The international effects of these casual remarks were realized almost at once. The British Prime Minister who had not wanted the expansion of war in the Far East, especially from the view point of the interest of NATO's security, visited Washington. so the conference had a very important meaning for the UN forces' new strategy. On the other hand, at the UN, on the 5th of December, the very day Truman and Attlee agreed to seek a cease-fire under UN auspices, a group of thirteen Asian and Arab states proposed to ask China and North Korea not to cross the 38th Parallel, and sounded out both sides about a cease fire along the 38th Parallel. The United States and the United Kingdom gave their assent, but China and North Korea gave no direct response. The CCF, who were securing the initiative of operation, were not agreeable with the proposal of the UN forces. The Untied Nation has tried to negotiate th peace plan between two sides from the December of 1950 and January of 1951. The Untied Nations' has achieved great results to negotiate for the peace plan on Korean peninsular after CCF's participation in Korean War. It's the results considering both the operation situation and political opinions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.33-41
• /
• 2023

The application of seismic separation joints that can improve the deformation capacity of piping is an effective way to improve seismic performance. Seismic separation joints capable of axial expansion and bending deformation are installed where deformation is expected and used for the purpose of safely protecting the piping. Bellows are flexible and have low stiffness, so they can be used as seismic separation joints because they have excellent ability to respond to relatively large deformation. In this study, the seismic performance and limit state for bending deformation of 2-ply and 3-ply bellows specimens were evaluated. Seismic performance was evaluated by applying an increasing cyclic load to consider low-cycle fatigue due to seismic load. In order to confirm the margin for the limit state of the evaluated seismic performance, an experiment was conducted in which a cyclic loading of constant amplitude was applied. As a result of the experiment, it was confirmed that the bellows specimen was made of stainless steel and had a high elongation, so that the 2-ply bellows specimen had the limit performance of resisting within 3 cycles even at the maximum forced displacement of the 3-ply bellows specimen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.102-110
• /
• 2023

PSC-I girder bridges constitute the largest proportion among highway bridges in Korea. According to the precision safety diagnosis data for the past 10 years, approximately 41.3% of the PSC-I bridges have been graded as C. Furthermore, with the increase in the aging of bridges, preemptive management is becoming more important. Damage and deterioration to the deck and girder with a long replacement cylce can have considerable impacts on the service and deterioration of a bridge. In addition, the high rate of device damages, including expansion joints and bearings, necessitates an investigation into the influence of the device damage in the structural members of the bridge. Therefore, this study defined representative PSC-I girder bridges with single and multiple spans to evaluate heterogeneous damages that incorporate the damage of the bridge member and device with the deterioration of the deck. The heterogeneous damages increased a crack area ratio compared to the individual single damage. For the single-span bridge, the occurrence of bearing damage leads to the spread of crack distribution in the girder, and in the case of multi-span bridges, expansion joint damage leads to the spread of crack distribution in the deck. The research underscores that bridge devices, when damaged, can cause subsequent secondary damage due to improper repair and replacement, which emphasizes the need for continuous observation and responsive action to the damages of the main devices.

• Composites Research
• /
• v.37 no.3
• /
• pp.238-245
• /
• 2024

In this study, as part of the development of a monitoring system for the efficient maintenance of steel pipes, an experimental study was conducted to evaluate the performance of steel pipes treated with modified polyethylene coating. In the case of the conventional mechanical pre-coating method, there was a deterioration in polyethylene adhesion during expansion testing, which led to the application of a chemical pre-treatment process using a calcium-mixed phosphate zinc film to resolve this issue. SEM and EDX analyses showed that the densest structure was observed at a Zn/Ca ratio of 1.0, and improved heat resistance compared to the conventional method was confirmed. Additionally, to prevent coating detachment during expansion, an evaluation of adhesion and elongation was conducted on steel pipes with modified polyethylene coating, incorporating materials such as elastomers based on maleic anhydride grafting, metal oxides, blocking agents, and slip agents. Experimental results showed that the specimen (S4) containing all modified materials exhibited more than a 25% performance improvement compared to the specimen (S2) containing only metal oxides. Lastly, the development and performance evaluation of wedge-shaped socketing and pressing wheels, which are part of the pipe fixing accessories, were conducted to prevent surface coating damage on the completed pipes.