• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.150-151
• /
• 2013

Recently, the internal space organization of the building changes to the frame construction and flat slab construction in the wall type structure. And the use of light weight panel changing the internal joint use easily is increased. Therefore, in this research, the length change characteristic that the magnesium chloride addition rate reaches to the magnesium curing body tries to be studied. It could confirm according to the length change specific result that the magnesium chloride amount of addition reaches to the magnesium oxide curing body to expand. And the thing described below was the large-scale expansion the magnesium oxide addition rate 60%. And it showed up as 50, 40, 30, 20, and order of 10s (%). It could look at to form the hydrate of the SEM picture result needle-shaped of the Hardened.

• 한국구조물진단유지관리공학회 논문집
• /
• 제1권1호
• /
• pp.75-87
• /
• 1997

To study the behavior a deck when it was collide with the ship approaching to the deck to berth, it was analyzed the effect zone by the ship collision which consists of deck slab and PC piles of the quay. The numerical technique is used to simulate the behavior of the deck when the ship hit the expansion joint of deck between the deck slabs. The failure behavior and zone of the deck are determinated by the comprehensive numerical study. The impact energy by the ship is also evaluated. It is concluded that these numerical analysis gave a reasonable estimation of the remedial area of the deck damaged by ship collision.

• 대한치과교정학회지
• /
• 제52권5호
• /
• pp.372-382
• /
• 2022

Anterior open bite and transverse discrepancy are often accompanied by hyperdivergent skeletal patterns. In addition, degenerative joint disorders and vertical maxillary excess contribute to an unfavorable convex facial profile with a retruded chin. Correction of this complex three-dimensional problem with orthodontic treatment alone is considered challenging owing to anatomical limitations. Moreover, a history of orthodontic treatment with premolar extraction makes retreatment difficult. This case report illustrates the application of a maxillary tissue bone-borne expander and biocreative reverse curve system in a 23-year-old female patient with a severe anterior open bite and transverse discrepancy who underwent orthodontic treatment with four premolar extractions. By setting the treatment target under precise diagnosis and using appropriate appliances, a satisfactory treatment result could be achieved without orthognathic surgery.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.810-819
• /
• 2007

Usually the status of a bridge is determined by its structural capability and material strength. Consequently a lot of researchers have studied the failure, the fatigue, and the deterioration of the structure in terms of the structural function of a bridge. However, the overall performance of a bridge may be affected simply by the damage of one of its components. Therefore this study utilized a systematic classification and statistical analysis based on the existing bridge inspection data collected in Taiwan to reach the following goals: (1) assess the performance distribution and deterioration rate for bearing and expansion joint of bridge; (2) find out the right time to do the preventive and essential maintenance for the component of bridge with an empirical method, and to decide what time and which component of a bridge will receive preventive maintenance or regular maintenance.

• Journal of Information Processing Systems
• /
• 제19권2호
• /
• pp.267-274
• /
• 2023

As the Internet has expanded and the continuous expansion of online shopping in China, many rural areas also have sales outlets. Due to the impact of economic conditions, rural locations have inadequate e-commerce logistical infrastructure, the number of outlets is small, and each other is in a decentralized state. For various reasons, the advancement of rural e-commerce logistics lags far behind that in urban areas. As the Internet of Things with big data grow in popularity, we can create and enhance the assurance system for the booming ecommerce in rural areas by building the support system of rural online shopping platform, and strengthening the joint distribution of logistics terminals based on data mining, so as to encourage the quick and healthy growth of rural online shopping.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제68차 하계학술대회논문집 31권2호
• /
• pp.107-108
• /
• 2023

본 논문에서는 교량의 변위를 IoT 장치를 이용하여 실시간 측정하고 추출된 데이터를 이용하여 교량의 이상징후를 AI 기반으로 진단 및 모니터링 하는 방법을 제안한다. AI 모델 학습 학습을 위해서 비정상 상태의 교량이 필요하지만, 실제 교량에 인위적으로 비정상 상태를 만들 수 없으므로, 탄성 받침을 이용하여 모의 교량을 제작하였다. 탄성 받침을 이용하여 제작에 반영 및 모의교량에 적합한 모의 차량도 제작하여 정상적 데이터와 비정상적 데이터를 수집하였다. 수집된 데이터를 전처리 과정을 통해 AI 분석을 통해 교량의 이상 징후를 진단 및 모니터링하였으며, 제안 모델을 실험한 결과 96.7%의 정확도가 도출되었다.

• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2022년 정기학술대회 논문집
• /
• pp.311-312
• /
• 2022

최근 발생한 경주 및 포항 지진으로 인해 다수의 매립배관 손상이 보고되었다. 벨로우즈 신축관이음은 기하학적 특성으로 인해 진동 및 침하 등으로 인한 손상을 저감시킬 수 있다. 벨로우즈 신축관이음관의 내진 성능평가에 대한 실험적 혹은 해석적 연구는 미미한 상황이다. 본 연구는 벨로우즈 신축이음관의 내진성능을 분석하기 위해 반복하중 기반의 실험적 연구를 수행하였다. 또한 실험결과를 기반으로 3차원 유한요소 모델을 구축하였으며 실험과 해석에서 얻어진 하중-변위 관계를 비교하였다. 해석 모델에서 전체적인 강성이 큰 것으로 나타났으며 최대 변위가 작용할 때 에너지 소산량은 약 10% 가량 큰 것으로 나타났다.

• 한국지역사회생활과학회지
• /
• 제28권3호
• /
• pp.365-375
• /
• 2017

The purpose of this study was to investigate the maximal elongation rate and area expansion ratio of human skin in various postures. Five males and five females (male: $23{\pm}2yr$ in age, $177.9{\pm}4.8cm$ in height, $76.7{\pm}8.8kg$ in body weight, $24.2{\pm}2.5$ in BMI, $16.2{\pm}3.4%$ in body fat; female: $22{\pm}1yr$, $163.2{\pm}3.6cm$, $51.4{\pm}2.7kg$, $19.3{\pm}1.6$, $27.4{\pm}6.7%BF$) participated in this study. Measurements were conducted using a pen and tape on the elbow, knee, wrist, shoulder, and neck. Subjects held postures so that each joint of the body regions was bent at its maximal level. The results were as follows: 1) The maximal elongation rate of skin showed a significant difference among the regions: $16.6{\pm}3.4%$ for the wrist, $22.4{\pm}5.5%$ for the neck (back), $37.6{\pm}11.3%$ for the shoulder, $42.6{\pm}10.0%$ for the knee, and $43.9{\pm}4.0%$ for the elbow (p<0.05). 2) The maximal expansion rate of the body surface area had the greatest values on the elbow ($93.7{\pm}6.4%$) and knee ($74.8{\pm}10.8%$). 3) No significant difference was found between males and females. In summary, maximal values of skin elongation and expansion rates in vivo were greater than in vitro values known from previous reports. These results can be applied to develop electronic fibers or textiles for wearable tight fit work clothing as well as fitness wear.

• 유통과학연구
• /
• 제13권12호
• /
• pp.65-71
• /
• 2015

Purpose - Domestic cooperatives tend to increase during the establishment of cooperatives and gradually through the basic law of social needs. However, only cooperatives' qualitative grow this secured without blessings, and their quantitative growth through government support is questionable. The purpose of this study is to analyze the agricultural cooperatives established through the Distribution System Cooperatives Basic Law, which was enacted in January 2012. Subsequently, establishing agricultural cooperatives was done briskly. However, cooperatives established rapidly after the founding of the Basic Law encountered problems. Research design, data, and methodology - To assess the performance of selected agricultural cooperatives, data were analyzed using the methodological Analytic Hierarchy Process (AHP) approach. The AHP is a set of systematic procedures to hierarchically analyze the elements of any problem. Using a survey on expertise, a series of comparative determinations of each pair is performed to evaluate the relative strengths and the strengths of the impact between elements within the hierarchy. A survey was conducted on 10 small agricultural cooperatives using AHP analysis for the examination. The purpose of such research and analysis is to recommend a direction for future policies aimed at small agricultural cooperatives. Result - This study applied three types of policy evaluation criterion, including market expansions, organizations, and cooperative projects, and 12 types of small agricultural cooperative policy measures. Market expansion policies for agricultural cooperatives are classified into four categories: school meals, direct transactions, shopping malls, and wholesale markets. Organizational policies for agricultural cooperatives are classified into four types: existing sales channel management, education, preventing free riding, and enlarging members. Cooperative project policies in agricultural cooperatives are classified into four policy areas: cooperation between cooperatives, community contribution, joint businesses, and government links. In this paper, the growth priority in agricultural cooperative policies is analyzed by applying policy evaluation criteria on the basis of a survey on expertise. The priorities of the policy program are also analyzed using a decision analytic hierarchy process. The results indicate that market expansion is the most important policy evaluation criterion therefore, improving direct transactions, school meals, management of existing sales channels, and shopping malls are crucial policy measures. In contrast, the cooperation of cooperatives, expansion of union members, and cooperation with the government were found to have low priority. Conclusions - Agricultural cooperatives should develop plans as follows. Small agricultural cooperatives need to secure school meals and direct transactions for market expansion, restructure marketing strategies to manage existing sales channels, and, finally, increase education and training for sustainable organizational development. This study has the following limitations. Because the subject of the investigation is a new cooperative, determining its sustainable growth is difficult. Therefore, through analysis and a continuous study of cooperatives, future research is expected to show that modifying the direction of agriculture cooperatives is necessary.

• Journal of the Korean Data Analysis Society
• /
• 제20권6호
• /
• pp.3087-3099
• /
• 2018

기업의 글로벌 네트워크는 지속적으로 변화하는 양상을 보이고 있으며, 국제 전자상거래의 확대 및 마켓 중심 글로벌 공급사슬관리(GSCM) 변화로 글로벌 거점으로 성장될 수 있는 국가를 전략적으로 선정하여 진출하고 있는 상황이다. 본 연구의 목적은 지난 10년간 우리나라 기업의 해외진출 국가현황 분석을 통해 우리나라 기업의 글로벌 네트워크 변화의 추이를 분석하여 우리나라 기업의 입장에서 중요한 해외진출 대상국가를 제시하고, 우리나라 제조 물류기업을 중심으로 해외 진출 대상 국가의 차이를 분석하여 기업간 시너지 효과를 만들 수 있는 전략을 제시하는 것이다. 제조 물류 기업별 진출희망 국가간의 우선순위는 차이는 있는 것으로 분석되었다. 물류회사는 독일에 진출하는 것을 가장 우선적으로 희망하였으며, 제조기업은 멕시코에 진출하는 것을 선호하였다. 국내 제조 물류 관련 기업은 규모의 경제 및 범위의 경제를 달성하고 글로벌 경쟁력 확보를 위해서는 해외시장 진출을 통한 볼륨과 네트워크 확보의 필요성을 인식하고 있으며 제조업체의 니즈를 반영한 해운을 포함한 물류관련 기업의 해외시장 동반 진출은 우리나라 기업의 해외진출을 용이하게 하여 국제경쟁력을 제고할 수 있는 방안이 될 수 있으며, 신 성장동력 확보 및 서비스 역량을 제고할 수 있는 방안이다.