• Journal of The Korean Astronomical Society
• /
• v.48 no.5
• /
• pp.299-311
• /
• 2015

We report first results from KVN and VERA Array (KaVA) VLBI observations obtained in the frame of our Plasma-physics of Active Galactic Nuclei (PAGaN) project. We observed eight selected AGN at 22 and 43 GHz in single polarization (LCP) between March 2014 and April 2015. Each source was observed for 6 to 8 hours per observing run to maximize the uv coverage. We obtained a total of 15 deep high-resolution images permitting the identification of individual circular Gaussian jet components and three spectral index maps of BL Lac, 3C 111 and 3C 345 from simultaneous dual-frequency observations. The spectral index maps show trends in agreement with general expectations – flat core and steep jets – while the actual value of the spectral index for jets shows indications for a dependence on AGN type. We analyzed the kinematics of jet components of BL Lac and 3C 111, detecting superluminal proper motions with maximum apparent speeds of about 5c. This constrains the lower limits of the intrinsic component velocities to ~ 0.98c and the upper limits of the angle between jet and line of sight to ~20°. In agreement with global jet expansion, jet components show systematically larger diameters d at larger core distances r, following the global relation d ≈ 0.2r, albeit within substantial scatter.

• Composites Research
• /
• v.13 no.6
• /
• pp.23-29
• /
• 2000

The internal residual stresses within the multilayered structure with sharp interface induced by the difference in thermal expansion coefficient between the materials of adjacent layers often provide the source of failure such as delamination of interfaces etc. Recent development of the multilayered structure with functionally graded interface would be the solution to prevent this kind of failure. However a systematic thermo-mechanical analysis is needed for the customized structural design of multilayered structure. In this study, theoretical model for the thermo-mechanical analysis is developed for multilayered structures of the $Al-SiC_p$ functionally graded composite for electronic packaging. The evolution of curvature and internal stresses in response to temperature variations is presented for the different combinations of geometry. The resultant analytical solutions are used for the optimal design of the multilayered structures with functionally graded interface as well as with sharp interface.

• Journal of Powder Materials
• /
• v.17 no.2
• /
• pp.148-153
• /
• 2010

Thermal barrier systems have been widely investigated over the past decades, in order to enhance reliability and efficiency of gas turbines at higher temperatures. Yttria-stabilized zirconia (YSZ) is one of the most leading materials as the thermal barriers due to its low thermal conductivity, thermodynamic stability, and thermal compatibility with metal substrates. In this work, rare-earth oxides with pyrochlore phases for thermal barrier systems were investigated. Pyrochlore phases were successfully formed via solid-state reactions started from rare-earth oxide powders. For the heat-treated samples, thermo-physical properties were examined. These rare-oxide oxides showed thermal expansion of $9{\sim}12{\times}10^{-6}/K$ and thermal conductivity of 1.2~2.4 W/mK, which is comparable with the thermal properties of YSZ.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.57-66
• /
• 2010

Today the various types of communication and application service are provided by the development of Internet and IP technologies. It is expected to be extended the service domain of two networks through the interconnecting P2PSIP overlay which is highlighted as an important technologies for Internet based services and IMS(IP Multimedia Subsystem) which is the new architecture adopted in the evolution of NGN. Therefore, this paper explains the possible methods of the service expansion with interconnecting P2PSIP overlay and IMS network. Specially this paper suggests the interconnection architectures of P2PSIP overlay and IMS network as subscriber's types and analyzes the traffic analysis model and session set up delay characteristics by simulation model. As a results, this paper shows that the interconnection architecture using gateway AS(Application Server) is the excellent method to interconnect the IMS in case of P2PSIP overlay only subscriber, and that interconnection architecture using I-CSCF is good method to interconnect the IMS in case of P2PSIP overlay and IMS subscriber.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.450-459
• /
• 2015

Small cell networks, as an important evolution path for next-generation cellular networks, have drawn much attention. Different from the traditional base stations (BSs) always-on model, we proposed a BSs on-off model, where a new, simple expression for the probabilities of active BSs in a heterogeneous network is derived. This model is more suitable for application in practical networks. Based on this, we develop an analytical framework for the performance evaluation of small cell networks, adopting stochastic geometry theory. We derive the system coverage probability; average energy efficiency (AEE) and average uplink power consumption (AUPC) for different association strategies; maximum biased received power (MaBRP); and minimum association distance (MiAD). It is analytically shown that MaBRP is beneficial for coverage but will have some loss in energy saving. On the contrary, MiAD is not advocated from the point of coverage but is more energy efficient. The simulation results show that the use of range expansion in MaBRP helps to save energy but that this is not so in MiAD. Furthermore, we can achieve an optimal AEE by establishing an appropriate density of small cells.

• Korean Journal of Remote Sensing
• /
• v.14 no.1
• /
• pp.1-16
• /
• 1998

Microwave brightness temperature data measured from the Special Sensor Microwave/Imager (SSM/I) aboard Defense Meteorological Satellite Program (DMSP) satellite are used to investigate the characteristics of hydrological features of the East Asian summer monsoon during 1994 and 1995. The analyzed parameters include total columnar water vapor, cloud liquid water, and rain rate. These are estimated from SSM/I brightness temperature data for the two summer seasons (June, July, August) of 1994 and 1995 over the Asian monsoon region (0$^{\circ}$-60$^{\circ}$N, 45$^{\circ}$-180$^{\circ}$E). Results indicate that there are periodic westward movement of dry air over the 20$^{\circ}$-30$^{\circ}$N latitudinal belt with about 20-30 day period. Considering that the location of the North Pacific high is closely linked to the evolution of the monsoon activities over East Asia, the westward expansion of the North Pacific high may be the one important element modulating the monsoon intensity.

• Structural Engineering and Mechanics
• /
• v.60 no.6
• /
• pp.1063-1077
• /
• 2016

Components manufactured from composite materials are frequently subjected to superimposed mechanical and thermal loadings during their operating service. Both types of loadings may cause fracture and failure of composite structures. When composite cross-ply laminates of type [$0_m/90_n]_s$ are subjected to uni-axial tensile loading, different types of damage are set-up and developed such as matrix cracking: transverse and longitudinal cracks, delamination between disoriented layers and broken fibers. The development of these modes of damage can be detrimental for the stiffness of the laminates. From the experimental point of view, transverse cracking is known as the first mode of damage. In this regard, the objective of the present paper is to investigate the effect of transverse cracking in cross-ply laminate under thermo-mechanical degradation. A Finite Element (FE) simulation of damage evolution in composite crossply laminates of type [$0_m/90_n]_s$ subjected to uni-axial tensile loading is carried out. The effect of transverse cracking on the cross-ply laminate strength under thermo-mechanical degradation is investigated numerically. The results obtained by prediction of the numerical model developed in this investigation demonstrate the influence of the transverse cracking on the bearing capacity and resistance to damage as well as its effects on the variation of the mechanical properties such as Young's modulus, Poisson's ratio and coefficient of thermal expansion. The results obtained are in good agreement with those predicted by the Shear-lag analytical model as well as with the obtained experimental results available in the literature.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 1997.06a
• /
• pp.73-101
• /
• 1997

Baculoviruses are characterized by large double-stranded circular DNA genomes and rod-shaped enveloped virions. Bombyx mori nucleopolyhedrovirus(BmNPV) is a major pathogen, which causes severe damage in sericulture. Currently, BmNPV is recogtnized as an improtant tool in molecular biology, especially for expression of useful genes in B.mori cells and silkworm larvae. Our laboratories have focused on the studies of the molecular mechanisms of BmNPV replication and the application of BmNPV to agriculture and medicine. The entire nucleotide sequence of the BmNPV genome has recently determined. The BmNPV genome possessed 135 putative genes and 7 homologous repeated sequence (hrs) regions. Relatively little space, a few to a few hundred base-pairs, was observed between the open reading frames and hrs. Termination codons often overlapped. These results showed a compactly packde BmNPV genome. Based on comparative sequence analyses, we speculated that the ancestor of BmNPV was a baculovirus similar to Autographa californica NPV(AcNPV). The function of the BmNPV genes were characterized by gene deletion analysis; p35 was found to be involved in blocking apoptosis and cysteine proteinase was found to be involved in horizontal virus transmission by degrading viral-infected larval host. By AcNPV and BmNPV coinfection experiments, we identified a BmNPV gene involved in expanding host specificity of AcNPV. The identified gene was likely encoded a DNA helicase based on the amino acid sequence analysis; a few amino acid substitutions in the putative DNA helicase gene resulted in the expansion of host range of AcNPV. These findings indicate that BmNPV evolved within a short period from an AcNPV-like ancestral virus due to rapid evolution including specific amino acid substitutions and gene deletions/insertions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.341-345
• /
• 2021

Known to improve resistance to chloride ingress, blast furnace slag is a widely used supplementary cementitious material. However, a detailed characterization of cements blended with slag exposed to seawater remains unavailable. This study employs thermodynamic modeling as a toolkit for assessing the long-term phase evolution of slag cement in seawater. The modeling result shows that slag incorporation leads to the formation of phases that are less prone to structural alteration in seawater. Formation of more ettringite is expected to induce expansion in both plain and blended cements, while brucite is unstable in the blended systems. Despite this, the porosity is expected to increase in the blended cements, and aluminate hydrates with a higher chloride binding capacity are more abundant in the blended cements. The results suggest that the use of slag in concrete improves the durability performance of concrete in marine environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1558-1564
• /
• 2019

Corporate business clusters create a borderless business network through value chains and value creation activities. Clusters in the IT sector are crossing regional boundaries because of their rapid technological development and short product life cycle. To investigate this phenomenon, we examined the value activities of IT companies. As a result, the global expansion of the case companies was limited, but they had business clusters that exceeded the regional boundaries. However, because the order of business clusters is not advanced, value activities are focused on productivity rather than innovation. Given the rapidly evolving nature of IT, it is necessary to evolve into a business cluster that can create new value. Companies must design and implement value-creating processes to develop new technologies or enter new markets, which can lead to cluster growth. Companies must design and implement value-creating processes to develop new technologies or enter new markets, which can lead to cluster growth.