• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.46-51
• /
• 2008

In this study, evaluation system of the thermal properties of the exothermic agents was investigated. Exothermic agents property evaluation system was developed by metering variation of power supply. Thermal properties of exothermic agents was affected by material mixture condition of exothermic agents, however, it was not affected by temperature. It is possible to make various exothermic agents by means of regulating thermal properties which is based on property evaluation system of exothermic agents.

• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.247-255
• /
• 2016

콘크리트에 전기전도성을 부여하여 확보한 발열 성능을 통해 주택의 난방이나 터널, 도로 또는 교량 상판에 눈녹이는 것이 가능하다. 본 연구는 전기전도 발열 콘크리트 개발을 위한 선행 연구로써 탄소계 전도성 재료인 흑연을 치환한 모르타르의 역학적 특성과 함께 전기저항 및 발열 특성에 대한 실험을 실시한 후 다음과 결과를 얻었다. 토상 흑연 치환율이 증가할수록 압축강도는 감소하는 것으로 나타났으나 전기 저항은 크게 낮아지는 것으로 나타났다. 발열특성을 보이기 위해서는 흑연의 혼입이 모르타르 전체 체적의 15%이상 이루어져야 하는 것으로 나타났다. 흑연의 혼입이 일정수준이상 이루어져 낮은 전기저항 및 발열특성을 확보한 경우에는 작용하는 전압과 발열량은 높은 상관관계를 가지며 전압의 제곱과 발열온도는 비례관계에 있는 것으로 나타났다.

• 소성∙가공
• /
• 제17권5호
• /
• pp.356-363
• /
• 2008

An evaluation system of the thermal properties of exothermic & insulating materials was developed. By measuring the power supply of the induction furnace, the thermal property of exothermic & insulating materials could be evaluated with high reproducibility at elevated temperature of molten steel. The thermal properties of exothermic & insulating materials were affected by mixing condition of raw materials. The effect of main components of exothermic & insulating materials such as metallic aluminum and $Fe_2O_3$ powder on the exothermic and insulating properties was examined. It could be expected to design and develop various exothermic & insulating materials by means of the evaluation system of the thermal properties.

• Archives of Metallurgy and Materials
• /
• 제64권3호
• /
• pp.931-934
• /
• 2019

Al-CuO is a thermite material exhibiting the exothermic reaction only when aluminum melts. For wide spread of its application, the reaction temperature needs to be reduced in addition to the enhancement of total reaction energy. In the present study, a thermite nanocomposite with a large contact area between Al and CuO was fabricated in order to lower the exothermic reaction temperature and to improve the reactivity. A cryomilling process was performed to achieve the nanostructure, and the effect of composition on the microstructure and its reactivity was studied in detail. The microstructure was characterized using SEM and XRD, and the thermal property was analyzed using DSC. The results show that as the molar ratio between Al and CuO varies, the fraction of uniform nanocomposite structure was changed affecting the exothermic reaction characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.555-555
• /
• 2012

The thermal stability of poly(sodium 4-styrenesulfonate) intercalated graphite oxide has been investigated using a differential scanning calorimeter. The poly(sodium 4-styrenesulfonate) intercalated graphite oxide composite shows a prominent exothermic reaction near $207^{\circ}C$ and an endothermic reaction near $453^{\circ}C$. Graphite oxide is responsible for the exothermic reaction while the endothermic reaction is caused by the poly(sodium 4-styrenesulfonate) used in the synthesis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide. The onset temperature of the exothermic reaction of poly(sodium 4-styrenesulfonate) intercalated graphite oxide decreased by $92^{\circ}C$ in comparison with that of graphite oxide, indicating the addition of poly(sodium 4-styrenesulfonate) in the composite has diminished the thermal stability of graphite oxide.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.37-43
• /
• 2022

In this study, we investigated the optical, electrical and exothermic characteristics of ITO/Ag/ITO multilayer structures prepared with various Ag thicknesses on quartz and PI substrates. The transparent conducting properties of the ITO/Ag/ITO multilayer films depended on the thickness of the mid-layer metal film. The ITO/Ag (14 nm)/ITO showed the highest Haccke's figure of merit (FOM) of approximately 19.3×10^-3 Ω^-1. In addition, the exothermic property depended on the substrate. For an applied voltage of 3.7 V, the ITO/Ag (14 nm)/ITO multilayers on quartz and PI substrates were heated up to 110℃ and 200℃, respectively. The bending tests demonstrated a comparable flexibility of the ITO/Ag/IT multilayer to other transparent electrodes, indicating the potential of ITO/Ag/ITO multilayer as a flexible transparent conducting heater.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.153-160
• /
• 2018

An environmentally favorable (chlorine-free) solid oxidizer, guanidinium dinitramide [GDN; $NH_2C(NH_2)NH_2N(NO_2)_2$], was newly synthesized from guanidine carbonate [$NH_2C(=NH)NH_2{\cdot}1/2H_2CO_3$]. Two different crystalline forms (${\alpha}-type$ and ${\beta}-type$) appeared according to the applied solvents and synthesis conditions. Moisture, during extraction, might become trapped in a crystal between inner molecules. Therefore, despite having the same chemical composition, Raman-IR and TGA-DSC revealed different physical characteristics of the two forms. Peaks of Raman shift near $1000cm^{-1}$ implied different chemical structures. Thermal analysis revealed an exothermic temperature $155.7^{\circ}C$ for ${\alpha}-type$ but one of $191.6^{\circ}C$ for ${\beta}-type$. The caloric value of ${\alpha}-type$ was 536.4 J/g, which was 2.5 times larger than that of the ${\beta}-type$, which was 1310 J/g. While the synthesized GDN of ${\alpha}-type$ showed a steep exothermic decomposition, the ${\beta}-type$ was slowly decomposed after melting through an endothermic process. This work implied that despite of the same molecular formula some different core thermal properties would appear depending on synthesis conditions.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.85-99
• /
• 2013

Powder metallurgy applied rapid heating to sintering starting year 1900. Since 1970 the study has intensified. Now rapid sintering concepts embrace a spectrum of options ranging from dunk cycles to microwave, induction, exothermic, electric field, and spark approaches. Most of the efforts are targeting reduced microstructure coarsening during sintering, although reduced material decomposition is another common goal. The efforts are impressive for simple shapes and success metrics such a small grain size after densification. Several barriers need to be removed prior to application in powder metallurgy commercial sintering. Rapid heating research needs to focus on significant property gains, accurate product dimensions, and lower costs. So far each property gain obtained with rapid heating is matched by traditional sintering and composition changes. Several examples are cited to show the goals for the next round of innovations.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.657-660
• /
• 2009

The surface of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ cathode particle was modified by lanthanum based oxide to improve electrochemical property and thermal stability. The XRD pattern of surface layer was indexed with that of $La_4NiLiO_8$. The discharge capacity of modified electrode was higher than that of pristine sample, specially at fast charge-discharge rate and high cut-off voltage. In the DSC profile of the charged sample, the generation of heat by exothermic reaction was decreased by surface modification. Such enhancement may by attributed to the presence of stable lanthanum based oxide, which effectively suppressd the reaction between electrode and electrolyte on the surface of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ electrode.

• 보존과학회지
• /
• 제32권2호
• /
• pp.223-234
• /
• 2016

2액형 에폭시 수지는 문화재 보존처리에 매우 광범위하게 사용되고 있으나 사용 시 주제와 경화제의 배합비율에 따라 경화특성, 기계적 강도, 화학 구조 등이 달라질 수 있고 대상 문화재의 안정성에 영향을 미칠 수 있다. 설문조사 결과, 보존처리 실무자들은 소량의 에폭시수지를 눈대중으로 혼합하거나 가사시간을 줄이기 위해 인위적으로 경화제를 과량 첨가하는 경우가 있는 것으로 조사되었다. 이 연구에서는 속경화형 2종과 일반경화형 2종의 에폭시수지를 대상으로 주제에 대한 경화제의 비율을 0.25~4배로 설정하여 각 경우의 경화특성, 기계적 강도, 화학 작용기를 분석하였다. 그 결과 속경화형 에폭시수지는 경화제가 0.5~2배일 때 높은 반응열과 함께 경화반응이 빠르게 나타났으며, 경화제 비율이 제조사에서 공시된 정비율보다 적을 때 더 높은 기계적 강도가 나타났고 에폭시의 가교결합도 활발히 일어난 것으로 관찰되었다. 일반경화형 에폭시수지는 대부분 경화반응열이 낮고 느린 반응속도로 경화가 진행되며, 경화제가 정비율 이하에서 가장 높은 기계적 강도를 나타냈다. 그러나 경화제 비율이 2배 이상 일 때는 경화속도가 매우 느려지고 접착강도도 낮아지는 것으로 나타났다. 따라서 배합비가 정비율 이하에서는 비교적 빠른 반응속도와 유사한 기계적 강도를 나타내는 반면 정비율 이상에서는 물성이 급격하게 저하되므로 구현하고자 하는 성능에 영향을 미칠 수 있을 것으로 판단된다.