• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.1
• /
• pp.53-59
• /
• 2019

As the number of harmful sites increases, many social problems are occurring. Therefore, in order to solve this problem, the government is carrying out activities to block access to web sites to harmful sites based on the law. However, due to the change from HTTP to HTTPS protocol, it has become difficult to block the harmful sites in the existing method. In the existing HTTP protocol, a method of blocking the site corresponding to the harmful site domain list by utilizing the DNS information was used. However, due to the generalization of HTTPS, it is difficult to block the harmful sites in the existing method. Therefore, the ISP uses the method of blocking the website using the SNI field in the TLS (Transport Layer Security) Handshake protocol used for HTTPS. However, since the method using SNI field raises the concern of monitoring Internet users or exposing information about connected sites, in this paper, we proposed method which can support anonymity to Internet users while blocking harmful sites. The suggested method also can support integrity and source authentication to the transmitted data.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.1-7
• /
• 2023

In this paper, we propose a base address candidate selection method using the $gp register and page granularity as a way to build a static analysis environment for firmware based on MIPS architecture. As a way to shorten the base address search time, which is a disadvantage of the base address candidate selection method through inductive reasoning in existing studies, this study proposes a method to perform page-level search based on the $gp register in the existing base address candidate selection method as a reference point for search. Then, based on the proposed method, a base address search tool is implemented and a static analysis environment is constructed to prove the validity of the target tool. The results show that the proposed method is faster than the existing candidate selection method through inductive reasoning.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.283-285
• /
• 2002

The paper describes a study of selection of existing a.c. Transmission facilities converted fur use with d.c. system. In order to increasing the power transfer capability of existing a.c. transmission facilities, d.c. is one of good alternatives. Some advantages and disadvantages of this method are discussed, and the selection method of existing transmission facilities for use with d.c. considering economics and stability is presented in this paper.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.249-250
• /
• 2018

To control the floor noise generated in the apartment building, a method of reinforcing the floor at the floor is applied. However, since existing buildings are difficult to reinforce upper generations, the ceilings of lower generations should be reinforced. The purpose of this study is to analyze the reduction effect by measuring the impact noise after reinforcing the floor soundproofing material on the ceiling of the existing building. In order to ensure the economical efficiency and flame retardancy of the products used as building interior materials, the existing polyurethane foam was impregnated with mineral to prepare test specimens and attached to the concrete slab surface. As a result, it was shown that heavy impact sound can reduce 2dB~5dB and light impact sound can reduce 4~8dB.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.387-396
• /
• 2016

This paper introduces a new type of collision attack on first-order masked Advanced Encryption Standards. This attack is a known-plaintext attack, while the existing collision attacks are chosen-plaintext attacks. In addition, our method requires significantly fewer power measurements than any second-order differential power analysis or existing collision attacks.

• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.1
• /
• pp.47-54
• /
• 1987

A new method for designing air pollution monitoring newtork is presented in this study. In this method, the magnitudes and the correlation coefficients of predicted concentrations in each grid points are examined and the monitoring stations are assigned to those stations which cover the damage cost the most. This method was applied to the Ulsan-Onsan Industrial Complex. This method turned out to be much more efficient than the method of TM coordinates and the method of concentric circles prescribed in the Standard Methods for Pollution Measurement as well as the existing monitoring system established in the area. The 21 stations selected by the method of TM coordinates could cover only 64.4% of the damage cost in the area, the 16 stations by the method of concentric circles 72.1%, and the existing 21 stations 67.8%, while 11 stations were enough to cover 90% of the damage cost in the area with this method. It also was found that this method required only 24 stations to cover the entire area.

• Journal of Broadcast Engineering
• /
• v.26 no.6
• /
• pp.790-798
• /
• 2021

In this paper, we propose a method to improve the accuracy of positioning by adding angle and distance validation to the existing Bluetooth-based positioning method using the angle of arrival. In the existing positioning method, an error occurs in the positioning value due to a multipath phenomenon induced in a non-visible distance environment. The proposed method derives the maximum and minimum angles of arrival that can be measured in consideration of the moving speed of the positioned device, and then examines whether the measured angle of arrival exceeds the range of the maximum and minimum angles of arrival. The accuracy of positioning is improved by conducting a distance validation check to see if the location of the device to be positioned and the distance to the positioning device exceed the effective distance. A simulation was conducted to analyze the positioning performance between the proposed method and the existing method, and it was confirmed that the positioning performance was improved through angle and distance validation compared to the existing method in a situation where the positioning error increased through the simulation results.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.773-782
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method to overcome disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do a fast data search and maintain search efficiency independent of the number of peer. The peers in the DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in the DHT method should send messages more frequently to keep the routing table updated and reduce the failure of a request. Therefore, this results in increase of network traffic. In our previous research, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but the reactive method had a disadvantage to generate more traffic than the existing Chord if the number of requests per second becomes large. In this paper, we propose an adaptive method of routing table update to reduce the network traffic. In the proposed method, we apply different routing table update method according to the number of request message per second. If the number of request message per second is smaller than some threshold, we apply the reactive method. Otherwsie, we apply the existing Chord method. We perform experiments using Chord simulator (I3) made by UC Berkeley. The experimental results show the performance improvement of the proposed method compared to the existing methods.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.761-772
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method to overcome disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do a fast data search and maintain search efficiency independent of the number of peer. The peers in the DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in the DHT method should send messages more frequently to keep the routing table updated and reduce the failure of a request. Therefore, this results in increase of network traffic. In our previous research, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but the reactive method had a disadvantage to generate more traffic than the existing Chord if the number of requests per second becomes large. In this paper, we propose an adaptive method of routing table update to reduce the network traffic. In the proposed method, we apply different routing table update method according to the number of request message per second. If the number of request message per second is smaller than some threshold, we apply the reactive method. Otherwsie, we apply the existing Chord method. We perform experiments using Chord simulator (I3) made by UC Berkeley. The experimental results show the performance improvement of the proposed method compared to the existing methods.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.788-796
• /
• 2017

This paper proposes a new measurement method to improve the shortcomings of an existing integral method for measuring heat flux in plug-type heat flux gauges in the high-temperature and high-pressure environments of liquid-rocket combustors. Using the existing integral measurement method, the calculation of the surface area for the heat flux in the gauge exhibits error in relation to the actual surface area. To solve this problem, transient profiles obtained from ANSYS Fluent were used to calculate unsteady heat flux as it adjusted to the measured temperature. First, a heat flux gauge was designed and manufactured specifically for use in the high-temperature and high-pressure conditions that are similar to those of liquid rocket combustors. A calibration test was performed to prove the reliability of the manufactured gauge. Then, a combustion experiment was conducted, in which the gauge was used to measure unsteady heat flux in a liquid rocket combustor that used kerosene and liquid oxygen as propellants. Reasonable heat flux values were obtained using the gauge. Therefore, the proposed measurement method is considered to offer significant improvement over the existing integral method.