• Geomechanics and Engineering
• /
• v.31 no.2
• /
• pp.197-208
• /
• 2022

Micropiles consisting of steel bars and grouts are commonly used in underpinning methods to reinforce supports or to suppress the subsidence of existing structures. Recently, applications in the field of geotechnical engineering have expanded. Despite the increasing use of micropiles are used, the PHC or steel pile formula is still applied for the settlement amount of micropiles. Compared with field test results, the amount of micropile subsidence obtained from the existing method may result in a very large error in the displacement of the micropile. Therefore, it is difficult to utilize micropiles effectively. Hence, to solve this problem, this study evaluated the behaviors and support characteristics of micropiles through field compression and tensile tests, and proposed a method for predicting the amounts of their subsidence. To confirm the appropriateness of the proposed method, field test results and the results obtained using the proposed method were compared. It was found that the settlement amounts of the micropiles as predicted through the existing method were significantly overestimated (error ≈ 50-80%) relative to the field test results, whereas the settlement errors of the piles predicted through the proposed method decreased (error ≈6-32%). Thus, it is possible to reduce the previously overestimated amount of settlement, and the modified method of this study allows more efficient design than the conventional method.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.58-68
• /
• 2009

The purpose of this study is to suggest new subject to satisfy the lack parts of examination course of the existing driving tower crane certificate by using the DACUM method. For this, problems of education for the existing driving tower crane certificate and the existing subjects are examined and, based on these, comparing analysis of new subjects that follows the DACUM method and the existing subjects are conducted. The results of this study that were progressed following the purpose and method at the above are as follow : 1) It is analyzed that the existing subjects for the driving tower crane certificate could not be applied to construction fields immediately and the education to deal with disorders when driving the tower cranes. 2) The number of the subjects that have been advanced following the DACUM method is seven and those consist of five theoretical subjects and two practical subjects. It is analyzed that the developed and suggested subjects can be used in construction fields when considering the theoretical and practical parts in no time.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.267-272
• /
• 1999

The auxiliary power supply system fur passenger service of railway car has been developed from MA(Motor-Alternator) to CVCF Inverter (Static Inverter). Generally, a customer wants to apply tile new control method and device for auxiliary power supply of railcar However, if the auxiliary power supply is supplied to extended existing line, the maintenance cost of the old system is less expensive than new developed system, so, the customer specifies that the auxiliary power supply has compatibility with existing one completely. At that time, the hardware is nearly same as existing system except small changes of accessories for better performance. This paper describes the flicker control using feed-forward method of auxiliary power supply system for new 50 electric railcars, which are delivered to Korean National Railroad (KNR) Kwa-chon Line. The existing power supply system has damping resistor box to stabilize the DC input (1.5 ㎸). At this time, for better system efficiency the new system has not include resistor box but new control method including feed-forward control is applied. This control algorithm realizes the better stabilization of input power compared to the result of the existing system, which includes resistor box

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.73-83
• /
• 2009

In this paper we propose an object similarity matching method based on shape characteristics of an object in an image. The proposed method extracts edge points from edges of objects and generates a log polar histogram with respect to each edge point to represent the relative placement of extracted points. It performs the matching in such a way that it compares polar histograms of two edge points sequentially along with edges of objects, and uses a well-known k-NN(nearest neighbor) approach to retrieve similar objects from a database. To verify the proposed method, we've compared it to an existing Shape-Context method. Experimental results reveal that our method is more accurate in object matching than the existing method, showing that when k=5, the precision of our method is 0.75-0.90 while that of the existing one is 0.37, and when k=10, the precision of our method is 0.61-0.80 while that of the existing one is 0.31. In the experiment of rotational transformation, our method is also more robust compared to the existing one, showing that the precision of our method is 0.69 while that of the existing one is 0.30.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.86-90
• /
• 1984

In this paper, a method measuring the reverberation time simultaneously on all of the audio frequency range was studied. The system developed in this study is composed of a pink noise generator, filter bank, and microcomputer with graphic display. In the experiment, reverbration time data measured by existing analog method and by the system were compared, and were almost same through the audio frequency. Based on the conclusion, the subject method has more convenience and accuracy with algorithm program development without existing problems and it was found out that this kind of method is widely available for many branches of room accoustics and architectual acoustics.

• International Journal of Advanced Culture Technology
• /
• v.1 no.2
• /
• pp.1-6
• /
• 2013

In this paper, we evaluate performance of existing similarity measurement metric and propose a novel method using user's preferences information entropy to reduce MAE in memory-based collaborative recommender systems. The proposed method applies a similarity of individual inclination to traditional similarity measurement methods. We experiment on various similarity metrics under different conditions, which include an amount of data and significance weighting from n/10 to n/60, to verify the proposed method. As a result, we confirm the proposed method is robust and efficient from the viewpoint of a sparse data set, applying existing various similarity measurement methods and Significance Weighting.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.151-152
• /
• 2022

When reinforcing an existing building with the Concrete Filled Tube(CFT) structure, it is impossible to form a diaphragm inside with the existing method. Therefore, in this study, a construction method was proposed so that the internal diaphragm could be welded on four sides by using a slot to transmit force.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.153-154
• /
• 2022

When reinforcing an existing building with the Concrete Filled Tube(CFT) structure, it is impossible to form a diaphragm inside with the existing method. Therefore, in this study, a construction method was proposed so that the force could be transmitted using the friction force between the diaphragm and the concrete using a double diaphragm.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.1-4
• /
• 1997

Existing cleaning solvent using screen printing are the organic solvents including aromatic compounds carried with poisonous and stench. besides, Cleaning method of current screen printing are for the most part mixed cleaning method of dipping and polish. Using 1,1,1-TCE, CFC-113 alternative system cleaning solvent be substituted for existing cleaning solvent against screen printing ink measured the cleaning efficiency according to gravimetric analysis method and property change of gassamer according to Image Analyzer. Also, Cleaning process system carry with excellent cleaning efficiency studied which was proposed new cleaning process including ultrasonic cleaning process be substituted for existing mixed cleaning method of dipping and polish.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2311-2314
• /
• 2003

In this paper, the embedded zero-tree wavelet image compression method using multi- threshold is proposed, which can reduce the scanning and symbol redundancy of the existing embedded zero-tree wavelet (EZW) method and enable more efficient coding. In the proposed scheme, a multi-threshold is constructed with the maximum absolute values from each subband decomposed by the wavelet transforms of the input image data. The multi-threshold values are compared with the threshold value T$_1$ in each pass in Successive Approximation Quantization (SAQ) to select the significant subbands, which are only used for the subsequent coding processes, therefore, can reduce the coding redundancy in the existing EZW. By the experimental results, it is verified that the proposed multi-threshold EZW method shows superior performances to the existing EZW method.