• ETRI Journal
• /
• v.42 no.5
• /
• pp.712-720
• /
• 2020

Recently, to make the best use of limited and precious spectrum resources, spectrum sharing between satellite and cellular networks has received much interest. In this study, we mathematically analyze the success probability of a fixed (satellite) earth station (FES) based on a stochastic geometry framework. Both the FES and base stations (BSs) are assumed to be equipped with a directional antenna, and the location and the number of BSs are modeled based on the Poisson point process. Furthermore, an exclusion zone is considered, in which the BSs are prohibited from locating in a circular zone with a certain radius around the FES to protect it from severe interference from the cellular BSs. We validate the analytical results on the success probability of the cognitive satellite-terrestrial network with directional antennas by comparing it using extensive computer simulations and show the effect of the exclusion zone on the success probability at the FES. It is shown that the exclusion zone-based interference mitigation technique significantly improves the success probability as the exclusion zone increases.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.347-352
• /
• 2006

Narrowband interference can severely degrade the performance of GPS receivers. Detecting the presence of interference and then characterizing it can lead to its removal. Receivers can be reconfigured to focus on other signals or satellites that are less vulnerable to that interference at that moment. Using hardware reconfigurability of FPGA receivers and characterizing the effect of narrowband interference on the GNSS signal quality lead us to a new RFI mitigation technique in which the highest quality and less vulnerable signal can be chosen at each moment. In the previous work [1], the post processing capability of a software GPS receiver, has been used to detect and characterize the CW interference. This is achieved by passing the GPS signal and the interference through the correlator. Then, using the conventional definition of C/No as the squared mean of the correlator output divided by its variance, the actual C/No for each satellite is calculated. In this work, first the 'Exclusion zone' for each satellite signal has been defined and then by using some experiments the effects of different parameters like signal power, jamming power and the environmental noise power on the Exclusion zone have been analyzed. By monitoring the Doppler frequency of each satellite and using the actual C/No of each satellite using the traditional definition of C/No and actual data from a software GPS receiver, the decision to reconfigure the receiver to other signal can be made.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.5
• /
• pp.31-40
• /
• 2012

This paper introduces a methodology for NREL 5MW wind turbine, which is the variable speed and variable pitch(VSVP) control system. This control strategy maximizes the power extraction capability from the wind in the low wind speed region and regulates the wind turbine power as the rated one for the high wind speed region. Also, pitch control efficiency is raised by using pitch scheduling.Torque schedule is made of torque table depending on the rotor speed. Torque control is used for vertical region in a torque-rotor speed chart. In addition to these, mechanical loads reduction using a drive train damper and exclusion zone on a torque schedule is tried. The NREL 5MW wind turbine control strategy is comprised by the generator torque and blade pitch control. Finally, proposed control system is verified through GH Bladed simulation.

• Journal of the Korean Regional Science Association
• /
• v.31 no.1
• /
• pp.65-81
• /
• 2015

The purpose of this study is to analyze the tourism demand elasticity of travel time distance on domestic destinations in Korea. Piecewise Linear Regression Model was applied to estimate the elasticities based on the Korea National Tourism Survey. It is found that the tourism demand elasticities by tourist distances decrease by 0.005% if time distance increase by 1 minute. In the first section, the most nearest distance is less than 11.6 minutes from the origin, elasticities increases by 0.206% of tourism demand, whereas in second section (from 11.7 to 75.1 minutes) and third section (more than 75.2 minutes) it decreases by 0.106% and 0.021%, respectively. The third section with sharply rising distance decay rate can be interpreted as the Effective Tourism Exclusion Zone of domestic tourists in Korea. Additionally, the more tourism demand is appeared at the younger age group than older age group, single travellers than group travellers, and people in Metropolitan Areas than in smaller cities.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.478-479
• /
• 2005

• Advanced Composite Materials
• /
• v.16 no.3
• /
• pp.245-258
• /
• 2007

The single-modal Weibull model has been assessed on Tyranno ZMI Si-Zr-C-O fiber if a set of shape and scale parameters accurately reproduced the effect of the size of the diameter on strength. The tensile data of a single fiber have been divided into two expedient groups as 'small diameter' group and 'large diameter' group in deriving the parameters, which should be consistent if the Weibull model accurately reproduced the size effect. However, the derived Weibull parameters were inconsistent between the two groups. Thereby the authors have concluded that the parameters of the single-modal Weibull model are dependent on the fiber diameter, so that the model is inadequate to reproduce the strength size effect. On the other hand, Weibull parameters were found consistent between the two groups by excluding the data of 'large mirror zone' sample, which was defined as the sample around 10% mirror zone area of the fracture surface. What is more, the exclusion reduced the strength variance more drastically in the 'large diameter' group than in the 'small diameter' group, even though the 'large mirror zone' samples were found identical in the percentage between the two groups. The authors therefore conclude that diameter limitation to the 'small diameter' group level can lead to drastically less distributed strength values than the estimated strength through the Weibull scaling on the present Tyranno ZMI Si-Zr-C-O fiber.

• Earthquakes and Structures
• /
• v.8 no.1
• /
• pp.37-56
• /
• 2015

The Emilia, May-July 2012, earthquake has dramatically highlighted the only the hazards facing the people in insufficiently secured workplaces, but also the socio-economic consequences of interruption of production activities. After the event, in order to guarantee suitable safety levels, the Italian government asked for a generalized seismic retrofit of buildingsaffected by the earthquake under consideration. Considering that Emilia is one of the most industrialized Italian region, the number of the industrial buildings to be verified could however lead to not acceptable resumption of production time. So, with the aim to speed up the recovery, were leaved out from this request the buildings which had undergone a strong enoughshaking without any damage. In practice, the earthquakes were being used as a "test" to evaluate the seismic structural strength. Besides, the Italian government provision specifies also the zones, within which buildings that escaped evident damage are exempt from obligatory checks, and termed "exclusion zones", shall be individuated using the data provided by the Italian National Institute of Geophysics and Volcanology in the form of so-called "shakemaps". Obviously, the precision of such data greatly influences the determination of the exclusions zones and so all the economic issues related to them. Starting from these considerations, the present paper describes an evaluation of the reliability of the procedure of shakemap generation with specific regard to the seismic events that struck the Emilia region on May 20 and 29, 2012.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.196-205
• /
• 2016

Background: The emergency planning zone (EPZ) of the city of Busan is divided into the precautionary actions zone (PAZ) and the urgent protective action planning zone; which have a 5-km radius and a 20-km to 21-km radius from the nuclear power plant site, respectively. In this study, we assumed that a severe accident occurred at Shin-Kori nuclear unit 3 and evaluated the dispersion speed of radiological material at each distance at various wind speeds, and estimated the effective dose equivalent and the evacuation time of PAZ residents with the goal of supporting off-site emergency action planning for the nuclear site. Materials and Methods: The total effective dose equivalent, which shows the effect of released radioactive materials on the residents, was evaluated using the RASCAL 4.2 program. In addition, a survey of 1,036 residents was performed using a standardized questionnaire, and the resident evacuation time according to road and distance was analyzed using the VISSIM 6.0 program. Results and Discussion: According to the results obtained using the VISSIM and RASCAL programs, it would take approximately 80 to 252.2 minutes for permanent residents to move out of the PAZ boundary, 40 to 197.2 minutes for students, 60 to 232.2 minutes for the infirm, such as elderly people and those in a nursing home or hospital, and 30 to 182.2 minutes for those temporarily within the area. Consequently, in the event of any delay in the evacuation, it is estimated that the residents would be exposed to up to $10mSv{\cdot}h^{-1}$ of radiation at the Exclusion Area Boundaries (EAB) boundary and $4-6mSv{\cdot}h^{-1}$ at the PAZ boundary. Conclusion: It was shown that the evacuation time for the residents is adequate in light of the time lapse from the initial moment of a severe accident to the radiation release. However, in order to minimize the evacuation time, it is necessary to maintain a system of close collaboration to avoid traffic congestion and spontaneous evacuation attempts.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.360-365
• /
• 2005

SMB (simulated moving bed) is a continuous chromatographic process by shifting periodically port position. Binary of mixture, Blue dextran and Orange G, was separated by SMB. These components have unique color individually, that is, Blue dextran is blue and Orange G is orange. It is easy to understand SMB process by observing the shift of color changes in SMB. These components was not adsorbed to stationary phase and isolated by difference of size exclusion factor. Mass transfer coefficient was determined by single pulse test under several flow rate conditions. Operation condition was obtained by standing wave theory and optimized for high purities in extract and raffinate streams. Experiment was performed in open loop 4 zone (2-2-2-2) SMB. There are several advantages in open loop SMB, where extract is product for high purity. It is also easy to control flow rate and monitor experimental state during operation. Experimental, extract and raffinate history is well fitted with simulation results, however, column concentration profile is a little different from simulation results. Purities were 99.5％ for extract and 98.9％ for raffinate and extract and raffinate yields were obtained as 98.9％ and 99.4％ respectively.

• Korean Journal of Agricultural Science
• /
• v.40 no.1
• /
• pp.61-78
• /
• 2013

The following four aspects should be examined in detail to revitalize North-East Asian agricultural cooperation specialized with Korea, Japan, and China. First, quality and safety standards of agricultural food should be unified. Secondly, it is necessary to build a food security cooperative system in North-East Asia. If three countries build the system, they can overcome a problem such as unstable supply and demand due to natural disaster, and also they can cope with food crisis. Thirdly, to establish North-East Asian Agro-valley is needed. After forming food production belt that connects Korea, Hokkaido in Japan, and the three north-eastern provinces in China, it is possible to realize high value-added agriculture with producing and processing of complementary food for partner country. Lastly, trilateral FTA negotiations should be managed carefully with operating the agricultural special zone and exclusion or prolong period of removal of tariff on sensitive items.