• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.74-75
• /
• 2005

ZnO epilayer were synthesized by the pulesd laser deposition(PLD) process on $Al_2O_3$ substrate after irradiating the surface of the ZnO sintered pellet by the ArF(193 nm) excimer laser. The epilayers of ZnO were achieved on sapphire ($Al_2O_3$) substrate at a temperature of $400^{\circ}C$. The crystalline structure of epilayer was investigated by the photoluminescence. The carrier density and mobility of ZnO epilayer measured with Hall effect by van der Pauw method are $8.27{\times}10^{16}cm^{-3}$ and $299cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the ZnO obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T) = 3.3973 eV - ($2.69{\times}10^{-4}$ eV/K)$T_2$/(T + 463 K). The crystal field and the spin-orbit splitting energies for the valence band of the ZnO have been estimated to be 0.0041 eV and 0.0399 eV at 10 K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the $\triangle$so definitely exists in the $\ulcorner_6$ states of the valence band of the ZnO. The three photocurrent peaks observed at 10K are ascribed to the $A_1-$, $B_1-$, and $C_1$-exciton peaks for n = 1.

• Journal of Sensor Science and Technology
• /
• v.14 no.3
• /
• pp.160-168
• /
• 2005

ZnO epilayer were synthesized by the pulesd laser deposition(PLD) process on $Al_{2}O_{3}$ substrate after irradiating the surface of the ZnO sintered pellet by the ArF(193 nm) excimer laser. The epilayers of ZnO were achieved on sapphire ($Al_{2}O_{3}$) substrate at a temperature of $400^{\circ}C$. The crystalline structure of epilayer was investigated by the photoluminescence. The carrier density and mobility of ZnO epilayer measured with Hall effect by van der Pauw method are $8.27{\times}1016cm^{-3}$ and $299cm^{2}/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the ZnO obtained from the absorption spectra was well described by the Varshni's relation, $E_{g}(T)$=3.3973 eV-($2.69{\times}10^{-4}$ eV/K)$T^{2}$/(T+463K). The crystal field and the spin-orbit splitting energies for the valence band of the ZnO have been estimated to be 0.0041 eV and 0.0399 eV at 10 K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_{6}$ states of the valence band of the ZnO. The three photocurrent peaks observed at 10 K are ascribed to the $A_{1}-$, $B_{1}-$, and $C_{1}-$exciton peaks for n = 1.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.134-139
• /
• 2000

In order to understand the removal mechanism and seek the optimal conditions. KrF excimer laser ablation of Cr films on glass substrates is investigated. The surface morphology of the laser-irradiated spot is examined by SEM. The measured single-shot ablation rate is found to be about two times the result of numerical analysis based on a surface vaporization model and heat conduction theory. Surface morphology examination indicates that the Cr film is removed by the sequence of melting-surface vaporization-,melt expulsion by plasma recoil and that the outmost ripple of the diffraction pattern gives a strong effect on the morphology of molten Cr during the melting and vaporization processes. To seek the optimal process parameters for micro patterning morphological investigation is carried out experimentally on samples having different chromium film thicknesses. Optimal processing conditions are determined to enhance the accuracy and quality of thin film removal for micro patterning.

• Journal of the Korean Ceramic Society
• /
• v.53 no.3
• /
• pp.295-300
• /
• 2016

To investigate the thermal conductivity and the structural properties of naturally cooled excimer-laser annealed Si, molecular-dynamics (MD) simulations have been performed. The thermal conductivity of crystalline Si (c-Si) was measured by direct method at 1000 K. Steady-state heat flow was measured using a stationary temperature profile; significant deviations from Fourier's law were not observed. Reliable processes for measuring the thermal conductivity of c-Si were presented. A natural cooling process to admit heat flow from molten Si (l-Si) to c-Si was performed using an MD cell with a size of $48.9{\times}48.9{\times}97.8{\AA}^3$. During the cooling process, the temperature of the bottom $10{\AA}$ of the MD cell was controlled at 300 K. The results suggest that the natural cooling system described the static structural property of amorphous Si (a-Si) well.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1007-1010
• /
• 2004

We report crystallization of a-Si using XeCl excimer laser annealing [1] on the plastic substrate. We tried to obtain higher crystallinity as the effect of $CeO_2$ seed layer patterned. Also, we tried to control the direction of crystallization growth of silicon layer for lateral growth as the type of $CeO_2$ pattern. This crystallization method plays an important role in low temperature poly-Si (LTPS) [2] process and flexible display.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1072-1075
• /
• 2004

Ion shower doping using a source gas of $PH_3/H_2$ was conducted on excimer-laser-annealed (ELA) Poly-Si. As-implanted damage is accumulated more and more with the increase of an acceleration voltage and a doping time. In this study we found that dopant-activation is relatively a rapid kinetic-process while damage-recovery is not.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1633-1635
• /
• 1997

For AMLCD pixel switching device, poly-Si TFT has the advantage of high field effect mobility over a-Si TFT. However, it also has some disadvantage such as large leakage current and more masking steps. We propose a new Inverse Staggered poly-Si TFT with a-Si offset. We have fabricated the new device and verified high ON/OFF current ratio. The device has lower leakage current level than the conventional Inverse Staggered poly-Si TFT and the same number of masking steps compared with conventional a-Si TFT's.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.6-11
• /
• 2001

We studied the feasibility of optical lithography for the critical layers of 0.12${\mu}{\textrm}{m}$ DRAM assuming ArF excimer laser as a light source. To enhance the fidelity of aerial image and process margin, Phase shift mask (PSM) patterns as well as binary mask patterns are corrected with in-house developed Optical Proximity Correction (OPC) software. As the result, w found that the aerial image of critical layers of DRAM cell with 0.12${\mu}{\textrm}{m}$ design rule could not be reproduced with binary masks. But if we use PSM or optical proximity corrected PSM, the fidelity of aerial image ,resolution and process margin are so much enhanced that they could be processed with optical lithography.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.109-112
• /
• 2008

The grain size of JIC poly-Si can be varied from few tens of nanometers to the one having the larger grain size exceeding that of excimer laser crystallized (ELC) poly-Si according transmission electron microscopy. JIC poly-Si exhibits an excellent uniformity with regards to the grain size. We report here the blanket crystallization of the large area using the $2^{nd}$ generation glass substrate.

• Journal of the Korean Ceramic Society
• /
• v.43 no.3 s.286
• /
• pp.185-192
• /
• 2006

The effects of annealing on structural and electrical properties of ITO/PES (Indium Tin Oxide/Polyethersulfone) films was investigated. Amorphous ITO thin films were grown on plastic substrates, PES using low temperature DC magnetron sputtering. Various post annealing techniques were attempted to research variations of microstructure and electrical properties: i) conventional thermal annealing, ii) excimer laser annealing, iii) UV irradiation. The electrical properties were obtained using Hall effect measurements and DC 4-point resistance measurement. The microstructural features were characterized by FESEM, XRD, Raman spectroscopy in terms of morphology and crystallinity. Optimized UV treatment exhibits the enhanced conductivity and crystallinity, compared to those of conventional thermal annealing.