• Korean Journal of Crystallography
• /
• v.8 no.2
• /
• pp.75-80
• /
• 1997

A perovskite relaxor ferroelectrics PMN is used as an important material to investigate the diffusive phase transition phenomena. In this study PMN single crystals were grown and the microstructure were observed. For the growth of PMN single crystals, the spontaneous nucleation technique and the TSSG technique were used. 2-5mm single crystals were grown from PbO self flux and it was observed that only PMN crystals were grown when excess MgO was added over 100% as flux. Single crystals with well developed (001) faces were obtained from PbO-B2O3 flux. single crystals larger than 1 cm were grown from PbO-B2O3 flux by TXXG technique. For higher quality crystals, optimization of the variables such as the rotation speed of seed crystal, the orientation of seed crystal, and cooling rate is needed. With grown crystals, it was confirmed by TEM diffraction pattern of thin plate crystal that the 1:1 ordering of Mg2+ and Nb5+ with small volume exists.

• Journal of Korea Water Resources Association
• /
• v.41 no.10
• /
• pp.1067-1077
• /
• 2008

An understanding of temporal trends of stream flows can help in the river management and the water resources planning for natural circumstances and human communities. Changes in temperature, precipitation, flow, and land use (agriculture, flood prevention activities, reservoir operation, interbasin diversion, etc.) are all eventually reflected in the flow pattern of the river. An assumption that the stationarity of the hydrologic series implying time-invariant characteristics of the time series accepted in water structure designs can no longer be valid if the flow changes as a result of the climate change or the stream flow use. Therefore, the identification and description of the characteristics of changes in hydrologic time series is a very important task in the river basin management. In this study, the statistical tests on the flow change forced by excess water diversions in the Sumjin River basin were performed by ways of single variable and time series variable comparisons. The tests showed that currently the Sumjin River basin statistically keeps its homogeneity in annual streamflow series, but the changed situation has been appeared in dry season streamflow series.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.869-877
• /
• 2020

A 24-month Advanced Power Reactor 1400 (APR1400) core with a very-low-boron (VLB) concentration has been investigated for an inherently safe and high-performance PWR in this work. To develop a high-performance APR1400 which is able to do the passive frequency control operation, VLB feature is essential. In this paper, the centrally-shielded burnable absorber (CSBA) is utilized for an efficient VLB operation in the 24-month cycle APR1400 core. This innovative design of the VLB APR1400 core includes the optimization of burnable absorber and loading pattern as well as axial cutback for a 24-month cycle operation. In addition to CSBA, an Er-doped guide thimble is also introduced for partial management of the excess reactivity and local peaking factor. To improve the neutron economy of the core, two alternative radial reflectors are adopted in this study, which are SS-304 and ZrO₂. The core reactivity and power distributions for a 2-batch equilibrium cycle are analyzed and compared for each reflector design. Numerical results show that a VLB core can be successfully designed with 24-month cycle and the cycle length is improved significantly with the alternative reflectors. The neutronic analyses are performed using the Monte Carlo Serpent code and 3-D diffusion code COREDAX-2 with the ENDF/B-VII.1.

• The Journal of Korean Medical History
• /
• v.32 no.1
• /
• pp.33-42
• /
• 2019

Objective : Describe the phenomenon of "clear qi below, turbid qi above" as found in the Somun Eumyangeungsangdaelon (Major Essay on Yinyang Resonances and Appearances 素問 陰陽應象大論) and compare this pattern with water-grain dysentery and flatulence symptom patterns in the Sanghallon (Treatise on Cold Damage). Method : Study the annotation of the Hwangjenaegyeong (Yellow Emperor's Internal Classic 黃帝內經) and compare the results with the Sanghallon's water-grain dysentery and flatulence. Conclusions and Results : The causes of water-grain dysentery and flatulence are associated with the ascending and descending properties of Yin and Yang. Additionally, these symptoms can also be caused by pathogenic heat, turbid pathogenic factors, and interruption of the movement of clear and turbid qi. Aspects of water-grain dysentery resemble several patterns found in the Sanghallon. If caused by a weakness of yang qi, it resembles Sayeoktang (四逆湯) syndrome. Weakness of spleen qi resembles Ijungtang (理中湯) syndrome. Flatulence is similar to fullness in the chest syndrome, which in the Sanghallon is caused by an obstruction of cold qi. If there is excessive cold, water-grain dysentery is similar to the syndrome of Gyeolhyung (結胸). If the qi is not scattered, deficiency syndrome is similar to Gyejigejagyaktang (桂枝去芍藥湯) syndrome and excess syndrome is similar to Mahwangtang (麻黃湯) syndrome. When flatulence is caused by fever in chest, it is similar to Chijasitang (梔子?湯) syndrome. When caused by heat and phlegm build up in chest, it is similar to Sipjotang (十棗湯) syndrome.

• Korean Journal of Acupuncture
• /
• v.39 no.3
• /
• pp.91-96
• /
• 2022

Objectives : The purpose of this study was to characterize the stimulation intensity in acupuncture manipulation techniques for tonification and sedation therapy. Methods : To describe the level of stimulation used in acupuncture manipulation techniques for tonification and sedation therapy, we reviewed the acupuncture manipulation techniques described in classical medical textbooks. Results : Based on the patients' conditions and pattern identification, acupuncture manipulation strategies for tonification and sedation therapy were chosen. For example, the excess condition was treated with sedative therapy, and the deficiency condition was treated with tonification therapy. For tonification therapy, weak to modest stimulation was applied in acupuncture manipulation techniques, whereas intense stimulation was applied for sedative therapy. Even though the intensity of acupuncture stimulation was chosen based on the clinical examination, deqi sensation is a crucial component of acupuncture treatment, and during acupuncture practice, the practitioner should choose the right intensity of acupuncture stimulation based on deqi response in each patient. Conclusions : We concluded that the tonifying and sedative effects of acupuncture treatment are related to the stimulation intensity of acupuncture manipulation techniques. For individualized medicine, the right amount of acupuncture stimulation should be administered based on the patients' conditions and responses, such as deqi responses.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.332-344
• /
• 1996

The vertical profiles of the natural $^{210}Po,\;^{210}Pb\;and\;^{234}Th$, activities were measured at the upper 150 m or 200 m of water column from west-east intersection in the east-southern coastal area of the Korea Peninsula during the period from 26 to 29 April 1994 to compare the removal rates (residence time) and removal processes for $^{210}Po\;and\;^{234}Th$. At the inshore stations, the $^{210}Po$ activity was generally higher in the thermocline and its under layer than in the surface mixed layer, while represented the reversed pattern at the offshore stations. However, the $^{210}Pb$ activity decreased generally with depth. Also, the activity of $^{210}Po$ relative to its parent $^{210}Pb$ was deficient in the water column above the main thermocline, but was slightly excess or close to equilibrium in the thermocline and its under layer. The vertical profiles for the activity of $^{210}Pb$ relative to its parent $^{226}Ra$ showed the reversed pattern with the vertical variation of $^{210}Po$ excess (or deficiency). The $^{234}Th$ activity was significantly lower in the surface mixed layer and thermocline than in the deeper layer. The residence time of $^{210}Po$ ranged from 1 to 4 years at the five stations except station E8 that showed yet long residence time (approximately 10 years). The long residence time at the station E8 may resulted from the thicker surface mixed layer and subsequent the vertical mixing of $^{210}Po$ which was recycled in the lower surface mixed layer compared to at the other stations. Also, the residence time of $^{210}Po$ was shorter at the inshore stations than at the offshore stations. However, the residence time of $^{234}Th$ ranged from 52 to 74 days at all station without the significant variation, was very much shorter relative to the residence time of $^{210}Po$. The correlation between the removal rate of dissolved $^{234}Th$ and the concentration of total suspended matter (TSM) was generally positive. Therefore, it seems that the major route of the removal mechanism of $^{234}Th$ from seawater in the surface mixed layer is via adsorption onto suspended particle surfaces (most likely inorganic particles) and subsequent settling to the bottom layer. Between the removal rate of dissolved $^{210}Po$ and the concentration of chlorophyll-a was positively good correlation. Consequently, most likely the removal of $^{210}Po$ may be occurred by uptake to organisms (mainly such as planktonic debris or fecal pellets) and subsequent settling.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1638-1652
• /
• 2000

Prolific females require better nutrition and feeding practice because of larger litter size and the substantial decline in body fat. Life-time pig output will be compromised if body protein and fat are not properly managed. First litter females are especially vulnerable because they can loose ${\geq}15%$ of whole-body protein. Conservation of body protein mass during first lactation minimizes wean to estrus interval and increases second litter size (up to 1.2 pigs). The ability to influence litter-size by amino acid nutrition is a new dimension in our understanding. A P2 fat depth below 12 mm at farrow and below 10 mm at wean compromised wean to estrus interval (>2 d) and next litter size (0.5 to 1.5 pigs) in sows. It is now clear that a 'modest' excess of feed during the first 72 h of pregnancy decreases embryo viability so that the potential for an increased litter size at birth is not realized. The capacity for milk production by prolific young sows is 25% higher than the standard used previously (NRC, 1988). First litter females averaged 9.82 kg milk/d for a 21 d lactation. Second and third litter counterparts averaged 10.35 kg/d. Milk production was 95% of peak by 10 d of lactation and sows were in greatest negative energy and lysine balance during the first 6 d. Nearly 45% of the total loss in body protein occurred within the first 6 d, but this could reduced to 30-35% by using a more aggressive feeding strategy after parturition. There appear to be 2 phases in lactation for lysine need (d 2-12 vs 12-21). Feeding to the higher level alleviates the second litter size decline. The lysine requirement for lactation can be predicted with accuracy, but we are not able to predict the second limiting amino acid. Mammary uptake of valine relative to lysine and recent work with practical diets suggest that the recent NRC (1998) pattern is realistic and that threonine and valine could be co-limiting for corn-soy diets for prolific sows nursing 10-11 pigs. Empirical studies are needed to refine the ideal pattern so that synthetic lysine can be used with more confidence. Milk fat output for the elite sow is extraordinary and poses an unnecessarily high energetic cost. Methods that reduce mammary fat synthesis will benefit the sow and may enhance piglet growth.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.213-217
• /
• 2020

In this study we report a wet-etching-based fabrication method for adiabatic optical-fiber tapers (OFTs), and describe their adiabaticity and HE₁₁ mode evolution at a wavelength of 1550 nm. The profile of the fabricated system satisfies the adiabaticity properties well, and the far-field pattern from the etched OFT shows that the fundamental HE₁₁ mode is maintained without a higher-order mode coupling throughout the tapers. In addition, the measured far-field pattern agrees well with the simulated result. The proposed adiabatic OFTs can be applied to a number of photonic applications, especially fiber-chip packages. Based on the fabricated adiabatic OFT structures, the optical transmission to the inversely tapered silicon waveguide shows large spatial-dimensional tolerances for 1 dB excess loss of ~60 ㎛ (silicon waveguide angle of 1°) and insertion loss of less than 0.4 dB (silicon waveguide angle of 4°), from the numerical simulation. The proposed adiabatic coupler shows the ultrabroadband coupling efficiency over the O- and C-bands.

• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.49-69
• /
• 2007

The purpose of this study is to analyze contribution factors of economic growth through growth accounting analysis in Korean port-logistics industry. Comparing with the average level of entire industry for 1990-2003, the contributions of total factor productivity and labor in port-logistics industry were high, but that of capital stock was very low. The pattern of growth in Korean port-logistics industry has greatly changed before and after Korean financial crisis. Before the 1997 financial crisis, the economic growth rate of port-logistics industry was 14.1%, which is higher than that of the whole industries, 7.7% for 1990-1998. Main contribution factors of the economic growth rate were the growth of capital stock and productivity, but ratios of their contributions were relatively low and did not come up to that for the whole industry. After the financial crisis, annualized growth rate of GDP in port-logistics industry had rapidly declined at 5.4% for 1998-2003, which did not get to that of the entire industry (10.1%). The main contribution factors of the economic growth rate over the 1998-2003 period were capital stock 13.1%, labor 57.0 %, and total factor productivity 29.9 %, Such growth pattern as excess dependence on growth of labor brought reduction of the rate of economic growth with degradation of productivity growth in the Korean port-logistics industry.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.183-184
• /
• 2013

Two main MBE growth techniques have been used: plasma-assisted MBE (PA-MBE), which utilizes a rf plasma to supply active nitrogen, and ammonia MBE, in which nitrogen is supplied by pyrolysis of NH3 on the sample surface during growth. PA-MBE is typically performed under metal-rich growth conditions, which results in the formation of gallium droplets on the sample surface and a narrow range of conditions for optimal growth. In contrast, high-quality GaN films can be grown by ammonia MBE under an excess nitrogen flux, which in principle should result in improved device uniformity due to the elimination of droplets and wider range of stable growth conditions. A drawback of ammonia MBE, on the other hand, is a serious memory effect of NH3 condensed on the cryo-panels and the vicinity of heaters, which ruins the control of critical growth stages, i.e. the native oxide desorption and the surface reconstruction, and the accurate control of V/III ratio, especially in the initial stage of seed layer growth. In this paper, we demonstrate that the reliable and reproducible growth of GaN on Si (110) substrates is successfully achieved by combining two MBE growth technologies using rf plasma and ammonia and setting a proper growth protocol. Samples were grown in a MBE system equipped with both a nitrogen rf plasma source (SVT) and an ammonia source. The ammonia gas purity was ＞99.9999% and further purified by using a getter filter. The custom-made injector designed to focus the ammonia flux onto the substrate was used for the gas delivery, while aluminum and gallium were provided via conventional effusion cells. The growth sequence to minimize the residual ammonia and subsequent memory effects is the following: (1) Native oxides are desorbed at $750^{\circ}C$ (Fig. (a) for [$1^-10$] and [001] azimuth) (2) 40 nm thick AlN is first grown using nitrogen rf plasma source at $900^{\circ}C$ nder the optimized condition to maintain the layer by layer growth of AlN buffer layer and slightly Al-rich condition. (Fig. (b)) (3) After switching to ammonia source, GaN growth is initiated with different V/III ratio and temperature conditions. A streaky RHEED pattern with an appearance of a weak ($2{\times}2$) reconstruction characteristic of Ga-polarity is observed all along the growth of subsequent GaN layer under optimized conditions. (Fig. (c)) The structural properties as well as dislocation densities as a function of growth conditions have been investigated using symmetrical and asymmetrical x-ray rocking curves. The electrical characteristics as a function of buffer and GaN layer growth conditions as well as the growth sequence will be also discussed. Figure: (a) RHEED pattern after oxide desorption (b) after 40 nm thick AlN growth using nitrogen rf plasma source and (c) after 600 nm thick GaN growth using ammonia source for (upper) [110] and (lower) [001] azimuth.