• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.839-844
• /
• 2024

This study analytically analyzed the impact of underground structure displacement behavior on track damage due to adjacent excavation work, ground deterioration, and changes in groundwater level. The concrete track that was the subject of the study was analyzed for sleeper floating track(STEDEF) and precast concrete slab track(B2S). Sleeper floating track is a track structure in which the concrete bed and sleepers are voided. precast concrete slab track is a track structure that induces the elastic behavior of the rail by assembling rails and fasteners using slabs. For numerical analysis, each concrete track, from rail to concrete bed, was modeled as three-dimensional elements. In addition, the displacement behavior of the underground structure was set as a variable to analyze the damage effect on the concrete bed. Using numerical analysis, the concrete bed stress due to uplift and subsidence was analyzed, and the level of crack effect was analyzed by comparing it to the tensile strength and shear strength. As a result of the analysis, it was found that the sleeper floating track was more vulnerable than the precast concrete slab track when the same uplift and subsidence occurred. In addition, uplift and subsidence, it was analyzed that the cracks range in the sleeper floating track was large.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.209-222
• /
• 2024

The Earth Pressure Balance (EPB) shield Tunnel Boring Machine (TBM) is widely used for underground tunnel construction for its advantages, such as eliminating the need for additional facilities compared to the slurry shield TBM, which requires Slurry Treatment Plant (STP). During EPB shield TBM excavation, a soil conditioning technique is employed to enhance the physical properties of the excavated soil by injecting additives, thus broadening the range of applicable ground conditions to EPB shield TBMs. This study explored the use of xanthan gum, a type of biopolymer, as an alternative to the commonly used polymer additive. Biopolymers, derived from biological sources, are fully biodegradable. In contrast to traditional polymers such as polyacrylic acid, which contain environmentally harmful components, xanthan gum is gaining attention as an eco-friendly material due to its minimal toxicity and environmental impact. Test conditions with similar workability were established through slump tests, and the rheological characteristics were assessed using a laboratory pressurized vane shear test apparatus. The experiments demonstrated that, despite exhibiting similar workability, the peak strength in the flow curve decreased with increasing the content of xanthan gum. Consequently, a correlation between the xanthan gum content and peak strength was established. Replacing the traditional polymers with xanthan gum could enable stable EPB shield TBM operation by reducing equipment load, in addition to offering environmental benefits.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.243-254
• /
• 2024

Currently, due to industrial development in domestic regions, buildings are saturated not only in major city centers but also in surrounding urban areas. Accordingly, people's attention has focused on underground spaces, and tunnels are being widely used, especially in urban development. Research on tunnels and tunnel excavation methods is actively underway. However, there is a lack of research on the wear and tear problems of sludge discharge pipes when using a slurry shield TBM. Therefore, in this paper, the L-shaped bend pipe used in the existing sludge discharge pipe was transformed into a T-shaped bend pipe to move sludge. As a result, it was confirmed that compared to the L-shaped bend pipe, the impact of the T-shaped bend pipe on the bend pipe when discharging sludge was reduced. Based on these results, it is expected that wear of the sludge discharge pipe can be minimized by using a T-shaped bend pipe when using slurry shield TBM equipment. This is expected to ultimately lead to economic benefits, such as reducing costs due to replacement of curved pipes or additional welding during tunnel construction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.345-363
• /
• 2024

Steel pipe reinforced grouting method has been widely used to strengthen the crown of tunnel face and prevent groundwater leakage during tunnel excavation. Various injection procedures without sealing have recently been suggested to enhance efficiency. There are two representative injection methods. One is simultaneous injection in segmented batches, and the other is multiple injection using the external packer. The pros and cons of each method were discussed in terms of construction duration and equipment. However, it has yet to be discussed how the injection procedure affects the grout diffusion range in the ground. This study aims to evaluate the grout diffusion range quantitatively by considering the practical grouting sequences. The grout viscosity was measured by laboratory testing. Then, the numerical modeling was structured using the commercial computational fluid dynamics software. Finally, the grout diffusion range affected by the injection procedure and ground conditions was evaluated by performing the numerical parametric study. The results showed that the injection method highly affected the grout diffusion range, especially for inhomogeneous soil. Consequently, it is anticipated that the proper method of steel pipe reinforced grouting will be suggested.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.192-203
• /
• 2009

In the new Seoul-Busan high speed railroad construction specially in area of city center passage the roadbed establishment is recommended the staibility for the existing subway tunnel segments of Busan subway 1st and 2nd lines regarding the appearance condition, a quality condition and the durability of the objective facility, and it evaluates the numerical analysis using MIDAS/GTS which leads the stability of the objective facility and investigatesd tunnels. Fundamental issues in tunneling under high groundwater table are discussed and the effect of groundwater on tunnel excavation was examined using a 3D stress-pore pressure coupled Finite-Element Method. Based on the results the interaction mechanism between the tunnelling and groundwater is identified. In the both of 1st and 2nd Line the maximum sinkage, unequal sinkage and the lining stress from numerical analysis are within permission and the damage degree is appearing to be disregarded. But it enforces necessary Pre-grouting in order to minimize an actual tunnel face conduct and when the tunnel is excavated it is also necessary to minimize the outflow possibility.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4592-4598
• /
• 1978

The purpose of this research is to find out mathemetically an economical intake water depth in the design of head works through the derivation of some formulas. For the performance of the purpose the following formulas were found out for the design intake water depth in each flow type of intake sluice, such as overflow type and orifice type. (1) The conditional equations of !he economical intake water depth in .case that weir body is placed on permeable soil layer ; (a) in the overflow type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }+ { 1} over {2 } { Cp}_{3 }L(0.67 SQRT { q} -0.61) { ( { d}_{0 }+ { h}_{1 }+ { h}_{0 } )}^{- { 1} over {2 } }- { { { 3Q}_{1 } { p}_{5 } { h}_{1 } }^{- { 5} over {2 } } } over { { 2m}_{1 }(1-s) SQRT { 2gs} }+[ LEFT { b+ { 4C TIMES { 0.61}^{2 } } over {3(r-1) }+z( { d}_{0 }+ { h}_{0 } ) RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L+ { dcp}_{3 }L+ { nkp}_{5 }+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ] =0}}}} (b) in the orifice type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }+ { 1} over {2 } C { p}_{3 }L(0.67 SQRT { q} -0.61)}}}} {{{{ { ({d }_{0 }+ { h}_{1 }+ { h}_{0 } )}^{ - { 1} over {2 } }- { { 3Q}_{1 } { p}_{ 6} { { h}_{1 } }^{- { 5} over {2 } } } over { { 2m}_{ 2}m' SQRT { 2gs} }+[ LEFT { b+ { 4C TIMES { 0.61}^{2 } } over {3(r-1) }+z( { d}_{0 }+ { h}_{0 } ) RIGHT } { p}_{1 }L }}}} {{{{+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 } L+dC { p}_{4 }L+(2 { z}_{0 }+m )(1-s) { L}_{d } { p}_{7 }]=0 }}}} where, z=outer slope of weir body (value of cotangent), h1=intake water depth (m), L=total length of weir (m), C=Bligh's creep ratio, q=flood discharge overflowing weir crest per unit length of weir (m3/sec/m), d0=average height to intake sill elevation in weir (m), h0=freeboard of weir (m), Q1=design irrigation requirements (m3/sec), m1=coefficient of head loss (0.9∼0.95) s=(h1-h2)/h1, h2=flow water depth outside intake sluice gate (m), b=width of weir crest (m), r=specific weight of weir materials, d=depth of cutting along seepage length under the weir (m), n=number of side contraction, k=coefficient of side contraction loss (0.02∼0.04), m2=coefficient of discharge (0.7∼0.9) m'=h0/h1, h0=open height of gate (m), p1 and p4=unit price of weir body and of excavation of weir site, respectively (won/㎥), p2 and p3=unit price of construction form and of revetment for protection of downstream riverbed, respectively (won/㎡), p5 and p6=average cost per unit width of intake sluice including cost of intake canal having the same one as width of the sluice in case of overflow type and orifice type respectively (won/m), zo : inner slope of section area in intake canal from its beginning point to its changing point to ordinary flow section, m: coefficient concerning the mean width of intak canal site,a : freeboard of intake canal. (2) The conditional equations of the economical intake water depth in case that weir body is built on the foundation of rock bed ; (a) in the overflow type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }- { { { 3Q}_{1 } { p}_{5 } { h}_{1 } }^{- {5 } over {2 } } } over { { 2m}_{1 }(1-s) SQRT { 2gs} }+[ LEFT { b+z( { d}_{0 }+ { h}_{0 } )RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L+ { nkp}_{5 }}}}} {{{{+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ]=0 }}}} (b) in the orifice type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }- { { { 3Q}_{1 } { p}_{6 } { h}_{1 } }^{- {5 } over {2 } } } over { { 2m}_{2 }m' SQRT { 2gs} }+[ LEFT { b+z( { d}_{0 }+ { h}_{0 } )RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L}}}} {{{{+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ]=0}}}} The construction cost of weir cut-off and revetment on outside slope of leeve, and the damages suffered from inundation in upstream area were not included in the process of deriving the above conditional equations, but it is true that magnitude of intake water depth influences somewhat on the cost and damages. Therefore, in applying the above equations the fact that should not be over looked is that the design value of intake water depth to be adopted should not be more largely determined than the value of h1 satisfying the above formulas.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.64-71
• /
• 2012

This is a basic study for recovering original form of Nongsanbyeoleop(農山別業) in Gangjin, Jeonnam, created in the latter part of Joseon period and the estimation of originla form at the time of creation was conducted by analyzing related literature and inspecting the actual site. "Joseokruki(朝夕樓記)" of Dasan Jung, Yak Yong could estimate spatial structure and using form of Nongsanbyeoleop and the arrangement of spatial structure in literature could be confirm by on-the-site inspection. The results of this study are as follows. The first, Nongsanbyeoleop managed spatial factors applying natural topography. For the spatial characteristics of Nongsanbyeoleop, the location of ancestral ritual space including deceased father's tomb and tomb house far from the main levee of Yun, Kwang Taek, a father of Yun, Seo Yu by 1.9km and housekeeping could be confirmed. The second, spatial estimation by "Joseokruki" could be possible. "Joseokruki" describes Joseokru.Youngmojae.Hanokkwan.Cheokyunjung.Sangam as construction factors, Wundang.Kookdan.Nokwunoh. as plant factors, Sookyunggan.Keumkoji.Nokeumjung.Uijanghae as hydroponic factors and Pyoeunkok.Aengjakang as natural topography factors. However, most of them were disappeared and at present, only Youngmojae, Keumgoji, Kukdan and Wundang show the past trace. The third is for the changed space of Nongsanbyeoleop and its reason. The surrounding space of Nongsanbyeoleop was planated by land arrangement in 1960s and it played a role of topographical damage because it's recognized as the plane factor including Nongsanbyeoleop's surrounding landscape rather than dotted factor. The forth, the actual measurement of Nongsanbyeoleop and digitalization of manual map of numerical value are judged to be sufficient to apply as the basic material for recovering garden in the future. Because of the diatahce changing method applied at that time, the garden recovery of Nongsanbyeoleop intended to be concreted and 3D model established by digitalized basic materials is considered to apply for multilateral studying. Thus, Nongsanbyeoleop which is byeolseo including the tomb of deceased father based on the conceptual hyo thought shows clear differences from the organized factors of Byolseowonrim of precedent studies and the importance of Byolseowonrim is sufficient. But, the constructional factors which cannot know disappeared spatial factors and accurate location became the limitation of this study. In the future, clear verification of original form must be progressed by excavation which can confirm the location of construction factors.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.149-159
• /
• 2018

The study is aimed at establishing basic data to identify the original forms of the garden in Unbo's House. Through interviews and related data comparison analysis the ideas and major events of the person involved in establishing a garden in Unbo's House. Also, derived the direct and indirect effects of these people on gardening. The results are as follows: First, Those directly related to garden in Unbo's House are representative figures of cultural heritage and traditional art in Korea. Based on their expertise and abundant experience in traditional spaces, they contributed greatly to the creation of Unbo's House as a traditional space. Unbo Kim, Gi-Chang who directly influenced Unbo's House gardening, which affected the site selection, location, and the installation of major garden plant plants and traditional landscaping facilities. Hyegok Choi, Soon-Woo recommended Wabon Kim, Dong-Hyun at the request of Kim Ki-Chang and was involved in the overall plan. Housing design, space design and design of major facilities such as pond were confirmed Wabon Kim Dong-Hyun. Second, Kim, Gi-Chang's wife Jeong, Rae-Hyun, who motived to construct a garden. Nosan Lee, Eun-Sang and Korean artist Lee, Seok-Ho were created a signboard and board of the Pillar to encourage simple life in paintings. The themes of the article motived image as creative. In addition, Kim, Hyeong-Sik and Kim, Wan who son of Unbo, has been with Unbo for a long time, watching and influencing garden changes in Unbo's House. Third, The main factors that influenced the garden by character are as follows. Unbo Kim, Ki-Chang had a thorough record-setting spirit and his longing for his mother and wife affected the selection of the site and setting the direction of the garden. His art world with the symbolic emphasis of traditional landscapes, including traditional facilities, and especially plant materials. Choi, Sun-Woo reflected his traditional consciousness and experience in the construction of Unbo's House. Kim, Dong-Hyun applied the basic framework of a traditional building based on Yeonkyongdang hall in Changdeokgung palace. He also reflected on the traditional landscaping design the facilities of ponds acquired through excavation of Donggung Palace and Wolji Pond, Gyeongju. Nosan Lee, Eun-Sang and Lee, Seok-Ho completed their unique place in Unbo's House. Kim, Hyung-Sik was involved in the process of changing, while Kim Wan ran the Unbo's House which he inherited from Kim, Ki-Chang.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.4-19
• /
• 2012

There remain many royal tombs of the Goryeo Dynasty in Gaeseong and Ganghwa. During the Goryeo Dynasty, these royal tombs were taken over tradition of tomb construction style from previous generation, and they completed their own inventive style. Furthermore they handed down those style to the Joseon Dynasty. The area of tomb was divided into 3 or 4 steps, and stone figures and T-shaped houses for sacrifice were arranged on each steps. It was the stone chamber of lateral opening style which had an entrance to southward, and it was formed as a rectangular box-shaped with a pile of stone walls and a flat ceiling. There was a coffin stand in the middle of floor, and traditional bricks were around them. The wall side and ceiling had been whitewashed and painted pictures. These are general characteristics for the tomb construction style of the Goryeo Dynasty. By the way, we can notice a number of features except those general things with inspection in detail. In early days, we confirmed 1step-parallel fulcrum ceiling, coffin stand of all in one stone, bier of burial artifact, and mural of plant material as a set, but they were changed as flat ceiling, Red-stone wall with rectangular stone, coffin stand set as stone pillar through the period of transitional form as of in the late 12th century. In case of several royal tombs, the fragments of king's epitaph which were confirmed from tombs could be defined owners clearly, and there were considerable timing difference between the large numbers of celadons which were excavated with the fragments of king's epitaph and recording chronologically of stone chamber structure. The reason for timing difference is that posterity artifacts were buried through repairing courses by occasion of destruction caused by robbing of the royal tombs. Meanwhile I inferred the existing hypothesis about owners of royal tombs and autonym ones in comparison the burial spot direction of hypothesis ones and outcomes of excavation. Therethrough, some hypothesis about owners of royal tombs such as Myung-neung which was assumed as tomb of the King Choongmok were not correct.

• Korean Journal of Heritage: History & Science
• /
• v.41 no.1
• /
• pp.109-125
• /
• 2008

Recently, there has been an increase in excavation studies of wood pagodas from the Three Kingdoms and Unified Shilla periods and new data related to wood pagoda erection are being found bringing about progress in research on this field. In other words, studies on wooden pagodas in Korea were composed mainly of flat, axis construction techniques and sarijangeomgu, but by acquiring new data, it has now become possible to study not only the stylobate construction procedure and transition, but also studies on restoring wooden pagodas. Furthermore, pagoda sites similar to this were found in China and Japan as well, making it possible to make comparative studies among ancient wooden pagodas possible. In this paper, the main remains were set as Baekjae wooden pagodas, which were the most frequently studied and among the wooden pagodas, the simcho (central base stone) and sarira housing locations. In result, simcho can be found changing its position from underground ${\rightarrow}$ halfway underground ${\rightarrow}$ above ground. Baekjae wooden pagodas up until the mid sixth century located at Neungsan-ri saji (AD 567) and Wangheungsaji (AD 577) had its simcho located underground and later it was constructed halfway underground and then above ground. It was confirmed that in the 7th century, it became customary to place above ground as seen in the Jaeseoksaji (AD639) and Hwangnyongsaji (AD645) wooden pagoda sites. The sarira was usually located on the south side of the simcho, but gradually changed to the center. In particular, sarira were combined in the simcho in the mid sixth century at the Wangheungsaji. This is approximately 11 years earlier than the Bijosa (AD 588) simcho found in Japan and this was not found even in the simcho of wooden pagodas in Yeongnyeongsa (AD 516) and Jopaengseong temple (AD 535~561) of China showing that the Wangheungsaji simcho was the earliest of its kind.