• The Korean Journal of Mycology
• /
• v.23 no.4 s.75
• /
• pp.359-368
• /
• 1995

F. napiforme, F. beomiforme and F. nygamai could not be classified in any of the existing sections of the genus Fusarium. To discuss of the exact taxonomic relationships among these species, the cellular polypeptide patterns were compared by using 2-D PAGE. Polypeptide pattern of F. beomiforme was different from those of other two species and was more similar to F. oxysporum in section Elegans. F. nygamai and F. napiforme might be another same section which would lie between section Liseola and section Elegans. The results were consistent with the comparison of isoenzyme patterns in these species.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.976-981
• /
• 2006

In case of attaching thermoelectric module and heat source, the polymer pad is attached on the $Al_2O_3$ plate, which is cooling side of thermoelectric module, in order to enhance mechanical safety of the system. It is impossible to calculate the exact distribution of temperature and flow pattern of inner gap of thermoelectric module. Therefore CFD(Computational Fluid Dynamics) analysis was executed to determine the thermo-fluid phenomena and distribution by Fluent. As the result of these analysis, heat transfer was dominated by conduction and the difference of temperature was linear distribution according to the thickness of polymer sheet.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.106-111
• /
• 2000

In this paper, we designed the DCO controller of frequency synthesizer by combing the m DS, DDS, and PLL methods to improve the performances(transition time, stability, re Designed DCO controller used parallel processing and pattern matching techniques. The designed DCO controller in this thesis profits the rapid and exact synchronization wh handed off in the mobile communication.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.6
• /
• pp.282-288
• /
• 2018

Objectives: The purpose of this study was to evaluate the neck node metastasis pattern and related clinical factors in oral cavity cancer patients. Materials and Methods: In total, 76 patients (47 males, 29 females) with oral squamous cell carcinoma (OSCC) who had no previous malignancies and were not undergoing neoadjuvant concomitant chemoradiotherapy or radiotherapy were selected for analysis. Results: Occult metastases were found in 8 of 52 patients with clinically negative nodes (cN0, 15.4%). Neck node metastases were found in 17 patients (22.4%). There was a statistically significant relationship between neck node metastasis and T stage (P=0.014) and between neck node metastasis and distant metastasis (Fisher's exact test, P=0.019). Conclusion: Neck node metastasis was significantly related to tumor size and distant metastasis during follow-up.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• Conservation Science in Museum
• /
• v.23
• /
• pp.49-60
• /
• 2020

The wrapping cloth with Cloud and Treasures Pattern donated by the head house of the descendants of Lee Hangbok (1556-1618) at the National Museum of Korea underwent conservation treatment for its protection and display. It was then compared with other ancient fabric objects for dating and analysis of the design. The subjects of Cloud and Treasures Patterns of clothing excavated from tombs dated to some point between the birth and death of Lee Hangbok and with Cloud and Treasures Patterns on the covers of Uigwe copies from the same period from the late 16th and 18th centuries were compared. The results of comparison with relics with clear dating are as follows: First, The Cloud and Treasures Patterns on the late 16th and 17th centuries the differences in the proportion between the head and the tail of the cloud among. Second, the Cloud and Treasures Patterns on the covers of Uigwe copies and fabrics excavated from tombs dated no later than the early 1700s share similarities with the Cloud and Treasures Pattern on the donated wrapping cloth in terms of the arrangement and size of designs and the proportion between each portion of the design. Though the study failed to identify the exact use of the wrapping cloth, it was estimated to be produced in early 18th century when the portraits of Lee Hangbok were copied.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.97-102
• /
• 2012

In general, one of the methods used to measure distortion is to use the full image of the regular pattern. However, because of low accuracy, this method is mainly used for an optical system such as a camera.. In order to measure distortion with high accuracy less than 1um, one can use the method of measuring the exact position of a mask image. In this case, a high accuracy stage with a laser encoder is required. In this paper, we investigate measurement of the distortion of high accuracy with a simple manual stage. The main idea is that we split and measure the mask image with the overlapping area by using CCD or CMOS, and then we get an exact position of the mask image by integrating the adjacent split images. We use the Canny Edge Detection method to get the position information of the mask image and we researched the process to exactly calculate distortion by using coordinate transformations and a least square method.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.193-200
• /
• 2014

Due to the advent of ubiquitous computing environment, it is becoming a part of our common life style. And tremendous information is cumulated rapidly. In these trends, it is becoming a very important technology to find out exact information in a large data to present users. Collaborative filtering is the method based on other users' preferences, can not only reflect exact attributes of user but also still has the problem of sparsity and scalability, though it has been practically used to improve these defects. In this paper, we propose clustering method by user's features based on SOM for predicting purchase pattern in u-Commerce. it is necessary for us to make the cluster with similarity by user's features to be able to reflect attributes of the customer information in order to find the items with same propensity in the cluster rapidly. The proposed makes the task of clustering to apply the variable of featured vector for the user's information and RFM factors based on purchase history data. To verify improved performance of proposing system, we make experiments with dataset collected in a cosmetic internet shopping mall.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.199-207
• /
• 2013

Purpose: The importance of occlusal contacts of the natural dentition for durability of teeth, mandibular stabilization, and restorative dentistry is well known. The purpose of this study is to analyze the occlusal contact and guidance pattern of Koreans by evaluating the static occlusion on maximal intercuspal position and measuring dynamic occlusion during straight protrusion. Materials and methods: The occlusal contacts at maximal interincisal position and the occlusal guidance pattern during straight protrusion of 29 subjects were recorded with shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA) and compared. Occlusal registration procedures were repeated 3 times. The position was fixed to an upright position and the head position was fixed with the Frankfurt horizontal plane paralleling the horizontal plane. Fisher's Exact Test (R-General Public License, ver. 2.14.1) and Pearson's Test were used to assess the significance level of the differences between the experimental groups (${\alpha}=.05$). Results: When using shimstock foil, T-Scan III system, and polyvinylsiloxane registration material, most of the patients showed contact on anterior, premolar, and molar teeth during maximal intercuspal position. Approximately 51% of maximal intercuspal position showed anterior contact using shimstock foil. When examining the protrusive movement using shimstock foil and T-Scan III system, guidance pattern with the central incisor was the most common. Conclusion: During maximal intercuspal position, there were cases in which not all of the teeth showed occlusal contact. During mandibular protrusive movements, one or more maxillary central incisors frequently joined in straight protrusion and the posterior teeth were disoccluded. Therefore, the anterior teeth protect the posterior teeth, and vice versa. Thus, mutually protected occlusion should be applied when reconstructing occlusion.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.125-137
• /
• 2009

Acoustic emission-based techniques are being used for the nondestructive inspection of mechanical systems used in service. For reliable fault monitoring related to the crack growth, it is important to identify the dynamical characteristics as well as transient crack-related signals. Widely used methods which are based on physical phenomena of the three damage stages for detecting the crack growth have a problem that crack-related acoustic emission activities overlap in time, therefore it is insufficient to estimate the exact crack growth time. The proposed pattern recognition method uses the dynamical characteristics of acoustic emission as inputs for minimizing false alarms and miss alarms and performs the temporal clustering to estimate the crack growth time accurately. Experimental results show that the proposed method is effective for practical use because of its robustness to changes of acoustic emission caused by changes of pressure levels.