• Membrane Journal
• /
• v.28 no.3
• /
• pp.187-195
• /
• 2018

In this work, the morphology of polyvinylidene-co-hexafluoropropylene (PVDF-co-HFP) membranes were systemically investigated using phase inversion technique, to target membrane contactor applications. As the presence of macrovoids degrade the mechanical integrity of the membranes and jeopardize the long-term stability of membrane contactor processes (e.g. wetting), a wide range of dope compositions and casting conditions was studied to eliminate the undesired macrovoids. The type of solvent had significant effect on the membrane morphology, and the observed morphology were correlated to the physical properties of the solvent and solvent-polymer interactions. In addition, to fabricate macrovoid-free structure, the effects of different coagulation temperatures, inclusion of additives, and addition of nonsolvents were investigated. Due to the slow crystallization rate of P(VDF-co-HFP) polymer, it was found that obtaining porous membrane without macrovoids is difficult using only nonsolvent-induced phase separation method (NIPS). However, combined other phase inversion methods such as evaporation-induced phase separation (EIPS) and vapor-induced phase separation (VIPS), the desired membrane morphology can be obtained without any macrovoids.

• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.87-100
• /
• 2003

This study was conducted in order to determine a proper level of molasses addition through the analysis of changes in appearance, nutritive and silage parameters before and after ensiling or deepstacking of broiler litter, to evaluate the effect of pelleting processed broiler litter and to develop methods to enhance palatability of broiler litter and reduce the adjustment period by ‘Hanwoo’ steers. Molasses addition was effective in ensiling and deepstacking of broiler litter and the proper addition level was about 5%. Changes in nutritive values of broiler litter by ensiling and deepstacking with or without molasses treatment were not great. Adding 5% molasses at deepstacking of broiler litter did not affect(P<0.05) in vitro digestion of dry matter and organic matter. Pelleting of broiler litter resulted in significant(P<0.05) moisture evaporation, organic matter reduction and nearly threefold increase of bulk density. Pelleting or molasses addition of broiler litter improved palatability by ‘Hanwoo’ steers and reduced the adjustment period by half(8-9 d).

• KSBB Journal
• /
• v.22 no.4
• /
• pp.201-206
• /
• 2007

The demand of L-arabinose has been increased recently because of its advantages including clinical effect. L-arabinose can be produced from dilute acid hydrolysis of agricultural wastes. In this study, optimum conditions of L-arabinose production using dilute acid hydrolysis of agricultural wastes and nutshells were determined. Among the tested various agricultural wastes and nutshells, corn fiber was selected as the best raw material for the production of arabinose. The highest arabinose production was achieved an acid hydrolysis of corn fiber for 1 h at 130$^{\circ}C$ with 0.4% sulfuric acid. Above optimal conditions, it was obtained 20.1 g/L glucose, 10.1 g/L xylose, 7.8 g/L arabinose and 1.8 g/L galactose from 90 g/L of corn fiber. For the purification of arabinose, it was carried out to remove all of sugars except arabinose by the Candida tropicalis cultivation of acid hydrolyzate and an organic contaminants such as pigments by the active carbon treatment of fermentation broth. Moreover, experiments were carried out to eliminate an ions by exchange chromatography. Finally, we obtained 3.1 g of partially purified L-arabinose powder with about 40% yield by evaporation and vacuum drying.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.265-276
• /
• 2020

This study was conducted to provide a basis for raising farm income by increasing the yield and extending the cultivation period by creating an environment where crops can be cultivated normally during high temperatures in summer. The maximum cooling load of the multi-span greenhouse with a floor area of 504 ㎡ was found to be 462,609 W, and keeping the greenhouse under 32℃ without shading the greenhouse at a high temperature, it was necessary to fog spray 471.6 L of water per hour. The automatic fog cooling control device was developed to effectively control the fog device, the flow fan, and the light blocking device constituting the fog cooling system. The fog cooling system showed that the temperature of the greenhouse could be lowered by 6℃ than the outside temperature. The relative humidity of the fog-cooled greenhouse was 40-80% during the day, about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The relative humidity of the fog cooling greenhouse during the day was 40-80%, which was about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The yield of cucumbers in the fog-cooled greenhouse was 1.8 times higher in the single-span greenhouse and two times higher in the multi-span greenhouse compared to the control greenhouse.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.189-193
• /
• 2007

We developed the doxorubicin-loaded PLGA double-layered microspheres using relatively simple oil-in-water (O/W) solvent evaporation method for sustained release of doxorubicin and investigated the release behavior according to PLGA molecular weight and initial drug loading. The double-layered microsphere was characterized on the surface, the cross-section morphology, the behavior of doxorubicin release for 5 weeks by SEM and fluorescence spectrophotometer. Double-layered microspheres showed smooth surfaces and clear difference between core and outer-shell. As the PLGA molecular weight increased, the release rate of doxorubicin-loaded, double-layered microspheres decreased. These results showed that the release behaviors can be controlled by the variation of molecular weight of PLGA.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.933-940
• /
• 2009

To evaluate characteristics in spray flame, laminar counterflow is investigated on the effects of equivalence ratio and fuel by a two-dimensional DNS (direct numerical simulation). For the gaseous phase, Eulerian mass, momentum, energy, and species conservation equations are solved. For the disperse phase, all individual droplets are calculated by the Lagrangian method without the parcel model. n-Decane ($C_{10}H_{22}$) and n-heptane ($C_7H_{16}$) is used as a liquid spray fuel, and a one-step global reaction is employed for the combustion reaction model. As equivalence ratio increases, the fuel ignites early and the high temperature region spreads wider. The peak value of temperature, however, tends to once increase and then decreases with increasing equivalence ratio. The decrease in the peak value of temperature for the higher equivalence ratio condition is caused by the cooling effect associated with droplet group combustion. Since the evaporation of n-heptane is early, the high temperature region spreads wider than ndecane, but the peak values of temperature for both n-heptane and n-decane is almost same.

• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.17-23
• /
• 2012

A fragrant microcapsule was prepared for use by students to reduce the stress of taking examinations. Rosmarinic acid was used as a fragrant oil which had the effect of relaxing stress, polycaprolactone (PCL) was used as a capsule wall material, and poly(vinyl alcohol) (PVA) as a stabilizer. The solvent evaporation method was used to form the microcapsule. The microcapsules were prepared by changing the stirring rate, the concentration of the stabilizer, and the molecular weight of PCL. The shape of the microcapsule was characterized by scanning electron microscopy (SEM). The size of the microcapsule was reduced by increasing the stirring speed. The release rate of rosmarinic acid was decreased when the higher molecular weight PCL was used. When the prepared microcapsule was tested in an aromatherapy class, the microencapsulated fragrant oil had a longer release time than the original fragrant oil. The study data showed that this fragrant oil was effective for increasing concentration ability, reducing stress, increasing digestive power, and increasing memory for the students.

• YAKHAK HOEJI
• /
• v.49 no.2
• /
• pp.185-191
• /
• 2005

The absorption of a P-gp substrate, rhodamine 123, from a liposomal dosage form was investigated across Caco-2 cell monolayers, rat intestines and rat intestinal Peyer's patches in Ussing chamber, Rhodamine 123 was incorporated into liposomes according to the standard evaporation method, which led to a production of liposomes with a mean diameter of 71.3 nm. The permeability (Papp of rhodamine 123 from a water solution across the monolayer was $2.45{\times}10^{-6}$ cm/s for $A{\leftrightarrow}B$ (apical to basal) and $14.0{\times}10^{-6}$ cm/s for $B{\leftrightarrow}A$ (basal to apical) directions, consistent with the fact that rhodamine 123 is one of the P-gp substrates. The transport of rhodamine 123 from the liposomal dosage form was much lower for both directions compared to the solution of rhodamine 123. The transport of rhodamine 123 across the rat intestine was also significantly decreased for both directions, I.e., influx and efflux, by the liposomal incorporation of the compound. The transport of rhodamine 123 across the Peyer's patch was substantially reduced by liposomal incorporation. No difference was found in the transport between the Peyer's patch and non-Peyer's patch. These observations suggest that the contribution of transport via Peyer's patches in the uptake of liposomes may be minimal, especially for rapidly absorbed compounds like rhodamine 123. Therefore, the increased absorption of P-gp substrates does not appear to be feasible by incorporating the compounds in liposomes, due to negligible involvement of Peyer's patches in the uptake of particulate dosage forms like liposomes. Liposomes may rather represent a sustained release dosage form of incorporated compounds.

• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.669-675
• /
• 1989

Fresh mushroom (Agaricus bisporus L.) was irradiated (0, 1, 2, 3kGy) and kept for 20 days at 9{\pm}1^{\circ}C\;and\;80{\pm}7%$ RH. Parameters of qualities were investigated on the physical and physiological characteristics. The pileus and stipe on nonirradiated mushroom were expanded and elongated from the 3rd day of storage, there by losing the acceptability as edible samples. After 5 days of storage, 2 to 3kGy of gamma irradiation were especially effective for controllong natural maturation and senescence of fresh mushrooms and so irradiated mushrooms were acceptable more than 20days storage. The texture of irradiated samples was superior to that of nonirradiated samples, even though softening of the tissue occurred during storage. Weight loss was greatest in the nonirradiated sample due to evaporation from an increased surface area resulting from expansion and ripending, which were retarded in the 2 to 3kGy irradiated samples after 5days of storage. These results suggest that the irradiation dose of 2 to 3kGy is apparently effective to extend the shelf life of fresh mushrooms stored at the above-mentioned condition.

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.49-60
• /
• 2009

Outdoor iron artefacts are easily corroded by salts, especially $Cl^-$ion, from environmental pollutants and acid rain because of their location, so that they need conservational treatments such as stabilization. However the conservation of outdoor iron artefacts are limited to be consolidated for the present and there are a few the studies for the desalinization. The general desalinization method is that objects are immersed in reagent such as alkaline corrosion inhibiting solutions targeting on buried iron artefacts, thus they are not available for outdoor iron artefacts. In this study, concerning those difficulties, the different desalting method is experimented that materials soaked in alkaline solutions attach to objects and they are packed by waterproof to avoid evaporation. This paper experiment burial iron artefacts at first in order to fine out an adaptable method for outdoor iron artefacts. The soaking materials are Korean traditional paper, gauze, cotton wipers, spill pads and the desalting regent is NaOH 0.1M. Additionally the exiting desalinization method which is to immerse objects in solution is performed to compare. The analyses are microscopes, SEM-EDS, X-ray diffraction, pH meter and Ion chromatography. The result is that spill pads show the best desalting effect out of other materials similar to immersing desalting method.