• Preventive Nutrition and Food Science
• /
• 제8권3호
• /
• pp.225-229
• /
• 2003

Clarified apple, carrot and orange juices were prepared using ultrafiltration and their single and blend juices were further concentrated using ultrafiltration, freeze-drying, and rotary evaporation. Effect of concentration methods on the quality of concentrated single juices and juice blends was investigated. Turbidity values of samples concentrated by evaporation were significantly higher than those prepared by ultrafiltration and vacuum freezing regardless of juice source (i.e., apple, orange or carrot) or blending (p<0.05). The highest soluble solids contents were obtained for the samples concentrated by evaporation process. Concentrated apple juice contained significantly higher amount of vitamin C and soluble solids than concentrated orange and carrot juices regardless of concentration methods (p<0.05). For blended samples, no direct relationships between blend ratio and total amount of vitamin C were found; however, samples contained more apple juice showed the highest value of soluble solids regardless of concentration methods.

• 동력기계공학회지
• /
• 제15권2호
• /
• pp.25-30
• /
• 2011

A fresh water generation system is designed for converting brackish water or seawater into fresh water. In this paper fresh water generation by distillation process that evaporates feed water and subsequently condenses vapor as evaporation product to get fresh water was studied and city water was employed as feed water. The system uses the ejector to create a vacuum, under which liquid can be evaporated at lower temperature than it at normal or atmospheric condition, hence less energy consumption. The effect of various operating conditions i.e. temperature of feed water and different orifice diameters were studied experimentally to investigate the characteristic of the system. It was found that these parameters have significant effect in the performance of fresh water generation system with low pressure evaporation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.182-186
• /
• 2005

In this work, thermal evaporation system was employed to deposit thin films of SiC on glass substrates in order to determine the parameters of them. Measurements included transmission, absorption, Seebak effect, resistivity and conductivity, absorption coefficient, type of energy band-gap, extinction coefficient as functions of photon energy and the effect of increasing film thickness on transmittance. Results explained that SiC thin film is an n-type semiconductor of indirect energy band-gap of ${\sim}3eV$, cut-off wavelength of 448nm, absorption coefficient of $3.4395{\times}10^{4}cm^{-1}$ and extinction coefficient of 0.154. The experimental measured values are in good agreement with the typical values of SiC thin films prepared by other advanced deposition techniques.

• 한국과학교육학회지
• /
• 제25권7호
• /
• pp.773-786
• /
• 2005

이 연구에서는 개발한 설문지를 통해 공기 중의 수증기량이 증발과 끓음에 미치는 영향에 대한 고등학생과 화학 전공 교사들의 인식을 조사하였다. 교과서의 서술에서 증발과 끓음은 기화라는 개념으로 연결되어 제시되고, 끓음은 증기압과 대기압의 관계로 설명되며, 증기압은 증발로 형성된 공기 중의 수증기 개념으로 연결되어 제시되어 있다. 이러한 개념간의 연결 사이에서 일어나는 다양한 인식들을 고등학생들의 경우와 화학 전공 교사들의 경우로 구분하여 비교하여 보았다. 또한 다양한 인식들이 형성된 배경을 알아보기 위하여 교과서의 관련 내용을 분석하였다. 연구 결과, 많은 학생들이 공기 중의 수증기량과 증발 및 끓음은 관련이 있다고 생각하였다. 그러나 이들은 거시적인 수준에서 설명되는 증발 현상과 미시적인 수준에서 이루어지는 물 입자들의 증발을 구분하지 못하였다. 또한 공기 중의 수증기가 증기압과 끓음에도 영향을 미친다고 생각하였다. 교사들의 경우에는 과학적 개념의 형성 비율이 학생들보다 높았으나, 많은 교사들이 학생들과 유사하게 증발과 끓음에 대해 다양한 인식을 하고 있었다. 교과서에서는 보편적으로 거시적인 관점에서 증발과 끓음의 현상을 설명하였으며, 미시적인 관점을 제시하는 경우에도 개념들간의 연결이 제대로 이루어지지 않았다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.189-194
• /
• 2005

The evaporation heat transfer and pressure drop of $CO_2$ in a small diameter tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator(test section). The test section was made of a horizontal stainless steel tube with the inner diameter of 4.57 mm, and length of 4 m. The experiments were conducted at mass flux of 200 to 700 $kg/m^2s$, saturation temperature of $0^{\circ}C$ to $20^{\circ}C$, and heat flux of 10 to 20 $kW/m^2$ . The test results showed the evaporation heat transfer of $CO_2$ has great effect on more nucleate boiling than convective boiling. The evaporation heat transfer coefficients of $CO_2$ are highly dependent on the vapor quality, heat flux and saturation temperature. The evaporation pressure drop of C02 are highly dependent on the mass flux. In comparison with test results and existing correlations, correlations failed to predict the evaporation heat transfer coefficient and pressure drop of $CO_2$, therefore, it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient and friction pressure drop of $CO_2$ in a horizontal tube.

• 한국물환경학회지
• /
• 제24권1호
• /
• pp.78-85
• /
• 2008

독성 성질을 가진 휘발성 염소계 탄소수소류의 휘발특성에 대하여 실험실 규모의 토양컬럼실험을 진행하였다. 실트점토성 토양과 사질성의 양질 토양 2개 컬럼으로부터 $12^{\circ}C$, $21^{\circ}C$의 각각 다른 조건으로 실험한 결과 총 10가지의 휘발성염소계 화학물질이 검출되었다. 1,1,1-trichloroethane, trichloroethylene 그리고 chloroform은 초기 농도대비 36.7~54.6% 제거되었고 carbon tetrachloride, 1,2-dichlorobenzene, tetrachloroethylene, 1,3-dichlorobenzene, dichlorobromethane 그리고 dibromochloromethane는 초기 농도대비 15.3~39.3% 제거되었으며 특히 bromoform 물질의 경우 초기 농도대비 10%이하의 가장 낮은 저감 비율이 보였다. 염소계 탄화수소류 초기 농도값, 토양 성상은 휘발량에 큰 영향을 끼치지 않았다. 그러나, 온도비교에서 $12^{\circ}C$보다 $21^{\circ}C$에서 저감비율이 더 높았다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.297-305
• /
• 2005

The evaporation heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver. a variable-speed pump. a mass flow meter. a pre-heater and evaporator (test section). The test section consists of a smooth. horizontal stainless steel tube of 7.75 mm inner diameter. The experiments were conducted at mass flux of 200 to $500\;kg/m^{2}s$. saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$. and heat flux of 10 to $40\;kW/m^2$. The test results showed the evaporation heat transfer of $CO_2$ has greatly effect on more nucleate boiling than convective boiling. The evaporation heat transfer coefficients of $CO_2$ are highly dependent on the vapor quality. heat flux and saturation temperature. The evaporation heat transfer coefficient of $CO_2$ is very larger than that of R-22 and R-134a. In making a comparison between test results and existing correlations. the present experimental data are the best fit for the correlation of Jung et al. But it was failed to predict the evaporation heat transfer coefficient of $CO_2$ using by the existing correlation. Therefore. it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in a horizontal tube.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권4호
• /
• pp.167-174
• /
• 2005

The evaporation heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth horizontal stainless steel tube of 7.75 mm inner diameter. The experiments were conducted at mass flux of 200 to $500kg/m^2s$, saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed the evaporation heat transfer of $CO_2$ has greater effect on nucleate boiling than convective boiling. The evaporation heat transfer coefficient of $CO_2$ is highly dependent on the vapor quality, heat flux and saturation temperature. The evaporation heat transfer coefficient of $CO_2$ is very larger than that of R-22 and R-134a. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the correlation of Jung et al. But the existing correlations failed to predict the evaporation heat transfer coefficient of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in a horizontal tube.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1246-1252
• /
• 1993

본 연구에서는 CWS액적을 대상으로 주위 분위기 조건등에 대하여 점화등의 연소현상을 평가하기 위한 실험장치를 구성하고 일련의 실험을 수행하였다.

• 한국분무공학회지
• /
• 제1권3호
• /
• pp.29-36
• /
• 1996

The present study systematically investigates the effect of evaporation rate on the combustion characteristics and the flame stabilization in a gasoline engine. A constant volume combustion chamber was used to elucidate a basic combustion characteristics and the premixer was installed to control temperature and equivalence ratio. And the maximum pressure, combustion duration and flame propagation according to the evaporation rate were measured to determine the optimal temperature range for evaparating a gasoline fuel. These experimental results indicate that the combustion characteristics such as combustion chamber pressure and combustion duration were deteriorated by decreasing surrounding temperature of fuel injected. It was also found that the overall gasification process for gasoline fuel was strongly influenced by a combustion chamber temperature rather than a premixer temperature.