• 대한수학교육학회지:학교수학
• /
• 제19권3호
• /
• pp.571-591
• /
• 2017

본 연구는 정적분으로 정의되는 곡선의 길이를 다루는 수업에서 나타나는 길이에 대한 수학적 담론의 특성을 파악하는 것을 목적으로 한다. 이를 위해 의사소통적 접근을 토대로 수업 참여자들이 길이라는 단어를 사용하는 용법에 주목하며 길이에 대한 담론을 조사하였다. 그 결과 담론 참여자들이 의사소통하는 과정에서 길이라는 단어를 세가지-일상적, 조작적, 구조적-용법으로 사용하고 있음을 확인하였다. 특히 참여자들이각자 서로 다른 용법의 단어를 사용하면서도 그 차이를 인식하지 못함으로써 효과적이지 못한 의사소통이 이루어짐을 확인할 수 있었다. 본 연구에서는 참여자들이 사용하는 단어의 용법 차이가 의사소통의 효과성을 떨어뜨린다는 사실을 강조하는 한편, 참여자들이 그러한 용법의 차이를 인식하고 주목한다면 의사소통적 단절을 극복하고 메타 수준의 학습이 가능할 수 있음을 제안하였다.

• 대한소아치과학회지
• /
• 제24권3호
• /
• pp.710-717
• /
• 1997

Autotransplantation is the transplantation of embeded, impacted, or unerupted tooth, into extraction socket or surgically prepared socket in the same individual. Clinically, successful autotransplantation must show radiolucent space(periodontal ligament space) between transplanted tooth and supporting bone, lamina dura, no root resorption, no ankylosis, no inflammatory change, and physiologic tooth mobility. It is important that procedure is atraumatic, and the instruments should not contact the root surface during procedure. We performed autotransplantation of impacted mandibular canine that transversely located beneath the apices of the mandibular incisors with uncompletely developed apex. In radiographs and clinical evaluation, this transplant showed successful clinical finding except irregularity of mesial root surface after 14 months. It is conclued that transplantation of canine with $\frac{1}{2}{\sim}\frac{3}{4}$ root development provides a good chance of pulp survival, limited risk of root resorption and ensures sufficient final length, and is thus recommended.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.195-201
• /
• 1996

This paper is mainly forcused on the application of modal analysis In analyze the geometrically non-linear buckling behaviors of large span spatial structures, and the evaluation of each eigen mode affected post-buckling behaviors and buckling loads. Modal analysis is applied . to derivation of the system matrices transforming actual displacement space into generalized coordinates space represented by coefficients multiplied in the linear combination of eigen modes which are independent and orthogonal each other. By using modal analysis method, it will be expected to save the calculating time by computer extremely. For example, we can obtain the satisfactorily good results by using about 7% of total eigen modes only in case of single layer latticed dome. And we can decrease the possibility of divergence on the bifurcation point in the calculation of post-buckling path. Arc-length method and Newton-Raphson iteration method are used to calculate the nonlinear equilibrium path.

• 한국연소학회지
• /
• 제18권2호
• /
• pp.23-31
• /
• 2013

Compact steam boiler is a useful heat exchanger in a space-intensive system. There are some constraints in terms of sizing and designing the space confined in the system which is usually used in vessels. In this study, design considerations for heavy duty heat exchangers of compact steam boilers are presented and evaluated. Especially, evaporator tubes of marine boiler which are exposed to a high temperature environment are considered. Also, extended surface designs with a high temperature are examined. In order to determine the criteria with considerations of both heat transfer rate and pressure drop in the heat exchanger, they are evaluated with major variables, such as the tube diameter, the number of tubes, and the tube length. Finally, the design parameters are estimated as the bare tubes are installed instead of the finned tubes.

• 한국시뮬레이션학회논문지
• /
• 제8권2호
• /
• pp.29-43
• /
• 1999

As real-time processing of data with large storage space is required in the era of multimedia, disk arrays are generally used as storage subsystems which be able to provide improved I/O performance. To design the cost-effective disk array, it is important to develop performance models which evaluate the disk array performance. Both queueing theory and simulation are applicable as the method of performance evaluation through queueing modeling. But there is a limit to the analytical method using queueing theory due to the characteristics of disk array requests being serviced in the parallel and concurrent manner. So in this paper we evaluate the disk array performance using simulation method which abstract disk array systems in the low level. Performance results were evaluated through simulation, so that mean response time, mean queueing delay, mean service time, mean queue length for disk array requests and utilization, throughput for disk array systems, can be utilized for capacity planning in the phase of disk array design.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.633-641
• /
• 2010

The purpose of this study is to evaluate a new flight suit in bilateral ways; subjectively and objectively in the improvements of comfort and mobility. Seven healthy males at the age of twenties volunteered in this wearing test. They were over 177 cm in height and 92-95 cm in chest circumference, which satisfies the M95 Special' size described in the Korean Military Specifications and Standards. The subjective satisfaction was evaluated according to the criteria of ease of donning and doffing, fitness of wear, mobility, space between cloth and body, convenience in using restroom. Subjective satisfaction evaluation says that the best improvement of movement are neck circumference, chest breadth, armscye circumference, waist back length, crotch length, crotch height and body rise. According to the evaluation, improvements of mobility were conspicuous especially in parts of body like neck, breast, waist, back, and arms. When evaluating objective satisfaction, we measured a angle difference in a prescribed standard-grid on a photograph that picked up while the subject performed each motion in front of 10 cm-interval grid. As a result, the motion that had angle difference above 5 degrees were arm stretching and standing on single leg holding at forward or at his side. Bending necks and waist, crouching also had angle difference of over 5 degrees. The improvements are discussed from the viewpoint that the increased ease in parts of armscye circumference and crotch in new flight suit pattern.

• 한국추진공학회지
• /
• 제18권1호
• /
• pp.42-49
• /
• 2014

설계성능이 검증된 70 N급 하이드라진 추력기에 대한 성능평가 시험이 수행되었다. 각각의 개발모델 추력기는 추력실 직경 변화에 따라 펄스모드로 연소시험이 수행되었으며, 비추력, 임펄스 비트 및 특성속도 등의 성능변수로 평가되었다. 추력실 직경의 증가와 감소에 따라 비추력과 특성속도가 감소하였으며, 성능평가 결과 표준모델의 성능특성이 가장 우수한 것으로 확인되었다.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.261-267
• /
• 2005

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.

• 창의정보문화연구
• /
• 제5권3호
• /
• pp.345-353
• /
• 2019

문자열 탐색을 위한 자료구조로 널리 사용되는 이진 트라이를 선형 이진 비트열로 표현하여 저장 공간 효율성을 높이기 위한 여러 연구들이 제안되었다. 한 개의 이진 트라이를 기반으로 생성된 이진 집약 트리기법은 입력 키 집합의 크기가 커지면 이진 비트열이 매우 길어지게 되어 키 탐색 시간이 크게 증가한다. 키 탐색 범위를 축소하고자 여러 개의 작은 크기의 이진 집약 트리를 계층적으로 표현한 계층적 집약 이진트리 기법이 제안되었으나 키 탐색 시 근본적으로 이진 비트열을 순차적으로 접근하여 처리하므로 탐색 범위에 포함되는 이진 비트열의 개수와 길이에 따라 검색 시간이 비례하여 증가한다. 본 논문에서는 포화이진 트라이로 표현된 여러 개의 이진 집약 트리를 계층적으로 구성하고, 키 탐색 범위에 해당하는 이진 비트열 경로를 간단한 숫자 변환을 통해 결정할 수 있도록 하여 검색 성능을 높였다. 최악의 시·공간 복잡도 계산을 이용한 성능 평가를 통해 검색 및 키 삽입 또는 삭제에 대해 제안 방법이 가장 높은 성능을 보여 주었다. 공간 사용량은 제안 방법이 기존의 방법에 비해 약 67%~68%의 공간만을 필요로 하여 가장 우수한 공간 효율성을 보이는 것으로 분석되었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.840-849
• /
• 1993

In this paper, it is reported that manipulator and hand-required for harvesting tomato were studied. At first, basic physical properties of tomato plant were investigated such as position of fruit, length of stems and leaves, width between ridges and son on . Secondly , basic mechanism of articulate manipulators with 5 to 7 degree of freedom were investigated by using evaluation indexes such as operational space, measure of manipulatability , posture diversity and so on. From the results, an articulate manipulator with 7 degrees of freedom was selected and the manipulator was manufactured as a trial according to the mechanism. Thirdly , physical properties about fruit and peduncle of tomato were also researched such as diameter, length , picking force and so on. Based on the properties , tomato harvesting hand with absorptive pad were also made as a trial. Finally, after the hand was attached to the manipulator, harvesting experiment was done in greenhouse . It was observed th t the robot could harvest satisfactorily , not only since the robot adapted to physical properties of tomato plant was manufactured but also since phyllotaxis of tomatoes was so methodical that all fruit clusters emerged in the same direction.