• Restorative Dentistry and Endodontics
• /
• v.40 no.1
• /
• pp.44-49
• /
• 2015

Objectives: This study compared the ability of several techniques to remove calcium hydroxide (CH) from the root canal and determined the influence of CH residues on the accuracy of the electronic apex locator. Materials and Methods: Root canals of 90 human maxillary lateral incisors with confirmed true working length (TWL) were prepared and filled with CH. The teeth were randomly assigned to one of the experimental groups according to the CH removal technique (n = 14): 0.9% saline; 0.9% saline + master apical file (MAF); 17% ethylenediamine tetraacetic acid (EDTA); 17% EDTA + MAF; 5.25% sodium hypochlorite (NaOCl); 5.25% NaOCl + MAF. Six teeth were used as negative control. After CH removal, the electronic working length was measured using Root-ZX (Morita Corp.) and compared with TWL to evaluate Root-ZX accuracy. All specimens were sectioned longitudinally, and the area of remaining CH (CH) and total canal area were measured using imaging software. Results: The EDTA + MAF and NaOCl + MAF groups showed better CH removal than other groups (p < 0.05). Root-ZX reliability to prevent overestimated working length to be > 85% within a tolerance of ${\pm}1.0mm$ (p < 0.05). There was strong negative correlation between amount of CH residues and EAL accuracy (r = -0.800 for ${\pm}0.5mm$; r = -0.940 for ${\pm}1.0mm$). Conclusions: The mechanical instrumentation improves the CH removal of irrigation solutions although none of the techniques removed the dressing completely. Residues of CH medication in root canals affected the accuracy of Root-ZX adversely.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.9
• /
• pp.819-823
• /
• 1995

Thin films of two kinds of Prussian Blue (PB)-modified, using iron(Ⅲ) complex instead of conventional FeCl3, were prepared on a gold substrate and these films were able to be electrochemically reduced in potassium nitrate solution. In case of PB-modified films prepared from Fe(Ⅲ)-ethylenediamine-N,N'-diacetic acid (FeEN3+)/K3Fe(CN)6 solution, the mid-peak potential was 0.156 V in 0.1 M KNO3 and it was found that potassium ion migrates into or out of the film during the electrolysis. These films were shown to be electrochromic. These films exhibited smaller peak separation than those formed from Fe(Ⅲ)-tartaric acid (FeTA3+)/K3Fe(CN)6 system. The diffusion coefficient of Fe(CN)63-/4- redox couple, evaluated using the fabricated Au rotating disc electrode(rde) previously reported, was in good agreement with the existing data. Two experimental procedures, including the voltammetry at relatively low scan rates and the rde study, have been used in order to characterize the electrode kinetics. The electrode kinetics of some redox couples (FeEN2+-FeEN3+ and FeTA2+-FeTA3+) on both PB-modified thin films and bare Au electrode were studied using a Au rde. In all cases the rate constants of electron transfer obtained with the PB-modified film electrodes were only slightly less than those obtained for the same reaction on bare Au disc electrodes. The conductivities, as determined from the slopes of the i-V curves for a ca. 1 mm sample for dried PB-modified potassium-rich and deficient bulk samples pressed between graphite electrodes, were 6.21 × 10-7 and 2.03 × 10-7(Ω·cm)-1, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.2
• /
• pp.161-168
• /
• 2022

Unmodified castor oil (CO) was used to obtain a castor-based aqueous polyurethane (CPUD) and isophorone diisocyanate (IPDI) was used to obtain a transparent film. The mixing effect of polypropyleneglycole (PPG) was analyzed to increase flexibility. In addition, ethylenediamine (EDA) was used as a chain extender. Tensile strength, elongation, and abrasion resistance were measured according to the change according to the castor oil content and the change in the chain extender, respectively. The tensile strength of the sample containing a lot of castor oil was 1.112 kgf/㎟, and the elongation was 88%. The tensile strength of the sample containing a lot of chain extender was 3.33kgf/㎟, and the elongation was 99%. The surface strength was visually confirmed through SEM. The surface strength was visually confirmed through SEM.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.206-212
• /
• 2006

In order to synthesize novel anticonvulsants, we researched that the reactions of diamines with 2,5-dimethoxytetrahydrofuran and 1,3-acetonedicarboxylic acid. The reaction of ethylenediamine with 2,5-dimethoxytetrahydrofuran and 1,3-acetonedicarboxylic acid afforded 8-(2-pyrrol-1-yl-ethyl)-8-aza-bicyclo[3,2,1]octan-3-one (yield; 5.0%) and 1,2-di-(8-aza-bicyclo[3,2,1]octan3-onyl)ethane (yield; 17.0%). In case of 1,3-diaminopropane, 8-(3-pyrrol-1-yl-propyl)-8-aza-bicyclo[3,2,1]octan-3-one(yield; 6.0%) and 1,3-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)propane (yield; 21.0%) were obtained. In case of 1,8-diaminooctane, 8-(8-pyrrol-1-yl-octyl)-8-aza-bicyclo-[3,2,1]octan-3-one (yield; 2.6 %) and 1,8-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)octane (yield; 24.9%) were obtained. In diaminobenzene reactions, synthetic yields of 8-aza-bicyclo-[3,2,1]octan-3-one derivatives were higher than those of pyrrole derivatives because re actions were done under room temperature. The longer the carbon chain of diaminoalkane is, the more reactive N atom is due to more electron donating effect, and the less steric hindrance around the carbon gave the higher chemical yields. The reaction of p-phenylenediamine as a diaminobenzene with 2,5-dimethoxyte-trahydrofuran and 1,3-acetonedicarboxylic acid produced p-dipyrrolylbenzene (yield; 4.0%), 8-(4-pyrrol-1-yl-phenyl)-8-aza-bicyclo[3,2,1]octan-3-one (yield; 12.0%), and 1,4-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)benzene (yield; 59.0%). In case of m-phenylenediamine, 8-(3-pyrrol-1-yl-phenyl)-8-aza-bicyclo[3,2,1]octan-3-one(yield; 2.0%) and 1,3-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)benzene (yield ; 28.0%) were obtained. But, synthesis of 1,2-di-(8-aza-bicyclo[3,2,l]octan-3-onyl)benzene by treatment of o-phenylenediamine was not successful, presumably due to the steric hindrance of 8-aza-bicyclo-[3,2,1]octan-3-one rings.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.1
• /
• pp.44-48
• /
• 2005

Purpose: Ethylenediamine-tetramethylenephosphonic acid (EDTMP) has widely used chelator for the labeling of bone seeking radiopharmaceuticals complexed with radiometals. $^{153}Sm$ can be produced by the HANARO reactor at the Korea Atomic Energy Research Institute, Taejon, Korea. $^{153}Sm$ has favourable radiation characteristics $T1/2=46.7\;h,\;{\beta}_{max}=0.81\;MeV\;(20%),\;0.71\;MeV\;(49%),\;0.64\;MeV\;(30%)\;and\;{\gamma}=103\;keV\;(30%)$ emission which is suitable for imaging purposes during therapy. We investigated the labeling condition of $^{153}Sm$-EDTMP and imaging of $^{153}Sm$-EDTMP in normal rats. Materials and methods: EDTMP 20 mg was solved in 0.1 mL 2 M NaOH. $^{153}SmCl^3$ was added to EDTMP solution and pH of the reaction mixtures was adjusted to 3 and 12, respectively. Radiochemical purity was determined with paper chromatography. After 30 min. reaction, reaction mixtures were neutralized to pH 7.4, and the stability was estimated upto 120 hrs. Imaging studies of each reaction were perfomed in normal rats (37 MBq/0.1 mL). Results: The labeling yield of $^{153}Sm$-EDTMP was 99%. The stability of pH 8 reaction at 60, 96 and 120 hr was 99%, 95%, 89% and that of pH 12 at 36, 60, 96 and 120 hr was 99%, 95%, 88%, 66%, respectively. The $^{153}Sm$-EDTMP showed constantly higher bone uptake from 2 to 48 hr after injection. Conclusion: $^{153}Sm$-EDTMP, labeled at pH 8 reaction condition, has been stably maintained. Image of $^{153}Sm$-EDTMP at 2, 24, 48 hr after injection, demonstrate that $^{153}Sm$-EDTMP is a good bone seeking radiopharmaceuticals.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.258-265
• /
• 2009

An anionic polyurethane dispersions (PUDs) were synthesized from the poly (tetramethylene glycol) (PTMG, Mw = 2000 g/mol), mixed isocyanate of dicyclohexylmethane-4,4'-diisocyanate $(H_{12}-MDI)$ and 4,4'-diphenylmethane diisocyanate (MDI), and dimethylol propionic acid (DMPA) as anionic site, following a prepolymer mixing process. Triethylamine (TEA) was used as a neutralization agent and the ethylenediamine (EDA) as the chain extender of the prepolymer. The effects of the DMPA molar ratio and aromatic diisocyanate content in the mixed isocyanate on the particle size and viscosity of PUD were studied. Also, the mechanical and thermal properties of the PUD cast films were discussed according to the molar ratio of DMPA and aromatic isocyanate content. It was found that the particle size and the viscosity of an anionic PUD decreased with increasing DMPA molar ratio but increased with increasing aromatic isocyanate (MDI) content in the mixed isocyanate at the constant DMPA content. Tensile strength of the PUD cast films increased and elongation at break decreased with increasing DMPA content at the constant mixed isocyanate molar ratios. In thermal degradation temperature of PUD cast films, the effect of DMPA contents was great but the effect of aromatic isocyanate contents at the low DMPA content was very slight respectively.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.215-224
• /
• 1989

Electrochemical reductions of $trans-[Co(en)_2X_2](ClO_4)_n$ (where X is cyanide, nitrite, ammonia, and isothiocyanate) were investigated by cyclic voltammetry and polarography at mercury and glassy carbon electrode. $trans-[Co(en)_2(CN)_2]ClO_4$ was reduced to Co(II) complex followed by adsorption to the mercury electrode. Cyanide ion was not released from the reduced Co(II) complex but the cyanide and (en) were released after the reduction to metallic cobalt. The other complexes except $trans-[Co(en)_2(CN)_2]ClO_4$ were reduced to cobalt(II) complexes followed by release of monodendate ligand, and (en) was released at the reduction step to metallic cobalt. $trans-[Co(en)_2(NO_2)_2]ClO_4$ was reduced to cobalt(Ⅱ) complex, and $NO_2^-$ ion was released followed by electroreduction through ECE mechanism at pH 2. On glassy carbon electrode, all complexes of Co(III) were reduced to Co(II) complexes with irreversible one-electron diffusion controlled reaction in which (en) was not released at this step. Increasing absorption wave number of complexes caused to negative shift of peak potential.

• Journal of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.418-423
• /
• 1990

The protonation constants for the macrocyclic ligands 1,15,18-triaza-3,4;12,13-dibenzo-5,8,11-trioxa cycloeicosane (NdienOdienH$_4$), 1,12,15-triaza-3,4;9,10-dibenzo-5,8-dioxa cycloheptadecane (NdienOenH$_4$), and 1,15-diaza-3,4;12,13-dibenzo-5,8,11-trioxa cycloheptadecane (NenOdienH4) have been determined by the potentiometry in aqueous solutions (25$^{\circ}C$, I = 0.1, KNO$_3$). The stability constants for complexes formed in the aqueous solution (25$^{\circ}C$, I = 0.1, KNO$_3$) between the above ligands and the metal ions (Co(Ⅱ), Ni(Ⅱ), and Cu(Ⅱ)) have been measured by potentiometry. The rate of the ligand substitution reaction was measured spectrophotometrically by the addition of aqueous solutions of ethylenediamine to the solution of the complex. From the study of the temperature effect on the rate constant (k$_{obs}$), activation parameters (E$_a$,${\{Delta}H^{\neq}$, and ${\{Delta}S^{\neq}$) have been determined. The possible mechanism for the substitution reaction is proposed.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.10
• /
• pp.543-550
• /
• 2016

Amine-type PP-g-VBC-EDA adsorbent, which possesses anionic exchangeable function, was prepared through photoinduced graft polymerization of vinylbenzyl chloride (VBC) onto polypropylene non-woven fabric and subsequent amination reaction using ethylenediamine (EDA). Adsorption characteristics of anionic nutrients on the PP-g-VBC-EDA adsorbent have been studied by batch adsorption experiments. The equilibrium data well fitted the Langmuir isotherm model, and the maximum monolayer sorption capacity was found to be 59.9 mg/g for $NO_3-N$ and 111.4 mg/g for $PO_4-P$. The adsorption energies were higher than 8 kJ/mol indicating anion-exchange process as the primary adsorption mechanism. The pseudo-second order kinetic model described well the kinetic data and resulted in the activation energy of 9.8-36.7 kJ/mol suggesting that the overall rates of $NO_3-N$ and $PO_4-P$ adsorption are controlled by the chemical process. Thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ indicated that the adsorption nature of PP-g-VBC-EDA for anionic nutrients is spontaneous and exothermic. The PP-g-VBC-EDA could be regenerated by washing with 0.1 N HCl.

• Nutrition Research and Practice
• /
• v.1 no.1
• /
• pp.29-35
• /
• 2007

Trace mineral studies involving metal ion chelators have been conducted in investigating the response of gene and protein expressions of certain cell lines but a few had really focused on how these metal ion chelators could affect the availability of important trace minerals such as Zn, Mn, Fe and Cu. The aim of the present study was to investigate the availability of Zn for the treatment of MC3T3-E1 osteoblast-like cells and the availability of some trace minerals in the cell culture media components after using chelexing resin in the FBS and the addition of N,N,N',N'-tetrakis-(2-pyridylmethyl)ethylenediamine (TPEN, membrane-permeable chelator) and diethylenetriaminepentaacetic acid (DTPA, membrane-impermeable chelator) in the treatment medium. Components for the preparation of cell culture medium and Zn-treated medium have been tested for Zn, Mn, Fe and Cu contents by atomic absorption spectrophotometer or inductively coupled plasma spectrophotometer. Also, the expression of bone-related genes (ALP, Runx2, PTH-R, ProCOL I, OPN and OC) was measured on the cellular Zn depletion such as chelexing or TPEN treatment. Results have shown that using the chelexing resin in FBS would significantly decrease the available Zn (p<0.05) $(39.4{\pm}1.5{\mu}M\;vs\;0.61{\pm}10.15{\mu}M)$ and Mn (p<0.05) $(0.74{\pm}0.01{\mu}M\;vs\;0.12{\pm}0.04{\mu}M)$. However, levels of Fe and Cu in FBS were not changed by chelexing FBS. The use of TPEN and DTPA as Zn-chelators did not show significant difference on the final concentration of Zn in the treatment medium (0, 3, 6, 9, $12{\mu}M$) except for in the addition of higher $15{\mu}M\;ZnCl_2$ which showed a significant increase of Zn level in DTPA-chelated treatment medium. Results have shown that both chelators gave the same pattern for the expression of the five bone-related genes between Zn and Zn+, and TPEN-treated experiments, compared to chelex-treated experiment, showed lower bone-related gene expression, which may imply that TPEN would be a stronger chelator than chelex resin. This study showed that TPEN would be a stronger chelator compared to DTPA or chelex resin and TPEN and chelex resin exerted cellular zinc depletion to be enough for cell study for Zn depletion.