• 공업화학
• /
• 제20권4호
• /
• pp.459-463
• /
• 2009

본 논문에서는 poly(vinyl acetate-co-ethylene) (VAE) 에멀젼에 가소제로 많이 사용되는 di-butyl phthalate (DBP)를 혼합하여 가소제 함량에 따른 물성 변화를 고찰하였다. 시차주사열량계(Differential Scanning Calorimeter) 측정으로부터 건조한 필름의 유리전이온도($T_g$)를 측정한 결과,가소제 함량의 증가에 따라, $T_g$는 감소하는 경향을 나타내었고 반면에 에멀젼의 점도는 가소제 함량의 증가와 더불어 증가하였다. 이러한 결과는 건조한 필름상태에서 가소제는 고분자사슬의 상호작용을 방해하여 $T_g$를 감소시키며 에멀젼 상에서는 가소제가 에멀젼 입자 내로 침투하여 swelling시킴으로써 입자크기가 증가하고 점도를 상승키는 것으로 나타났다. 기계적 물성은 가소제의 함량이 증가할수록 저하되었으나 내수성은 증가되는 결과를 얻었다.

• Elastomers and Composites
• /
• 제36권1호
• /
• pp.14-21
• /
• 2001

신발 중창용 소재인 ethylene vinyl acetate (EVA) 발포체의 인장강도, 반발탄성, 영구압축줄음율 (compression set) 등의 물성을 향상시킬 목적으로 ethylene-1-butene copolymer (EtBC)를 EVA에 블렌드하여 가교특성을 조사하였으며, 발포체를 제조한 후 셀의 구조적 특성 및 발포체의 기계적 물성을 조사하였다. EVA/EtBC 블렌드에서, EtBC의 함량이 증가할수록 블렌드의 점도 및 가교 밀도는 증가하여 oscillating disk rheometer (ODR)에서 높은 torque 값을 나타내었으며 발포배율은 감소하였다. 발포제 함량의 증가에 따라서 발포배율 및 셀의 크기는 증가하였다. 발포체를 동일 비중에서 비교하였을 경우, EtBC 함량이 증가할수록 EVA/EtBC 발포체의 인장강도, 영구압축줄음율, 반발탄성 등 기계적 물성이 우수해졌다.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.18-23
• /
• 2015

Vinyl acetate (VA) contents of poly(ethylene-co-vinyl acetate) (EVA) analyzed by infrared spectroscopy (IR), nuclear magnetic spectroscopy (NMR), and thermogravimetric analysis (TGA) were compared. Four grade EVAs supplied by Aldrich Co. and four grade EVAs manufactured by DuPont Co. were used. For IR analysis, VA contents were determined using calibration curve (absorbance ratio of $1739cm^{-1}/2922cm^{-1}$ or $609cm^{-1}/1464cm^{-1}$) of reference EVAs. Correlation coefficients of the calibration curves were not sufficiently high ($r^2{\leq}0.96$). For NMR analysis, VA contents were determined using peaks of $CH_3$, $CH_2$, and CH. VA contents determined by NMR analysis were less than those marked by suppliers more than 10%. For TGA, VA contents were determined using weight loss through deacetylation. VA contents determined by TGA were slightly different with those marked by suppliers. Difference in the VA contents determined by different analytical methods was discussed, and difference in the analytical results according to the EVA suppliers was also examined.

• 센서학회지
• /
• 제23권4호
• /
• pp.229-233
• /
• 2014

In this study, a V-grooved single-mode fiber along with optical time domain reflectometry (OTDR) as a quasi-distributed temperature sensor was investigated. The external medium used to fill the V-groove affects the optical mode. The V-groove was filled with ethylene vinyl acetate (EVA) because its transmittance was sensitive to temperature. The experimental results showed that the optical loss of the sensor varies with temperature, and the sensitivity depends on the depth of the V-groove.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호spc1호
• /
• pp.53-59
• /
• 1995

Ethinylestradiol (EE)-containing matrix was fabricated with ethylene-vinyl acetate(EVA) copolymer to control the release of the drug, Effect of addition of PEG 400 as receptor solution, the stripping of skin and Azone pretreatment on skin on the permeation of EE through the excised mouse skin was also studied. The permeation rate of EE through the excised mouse skin was affected by the PEG 400 volume fraction. The Azone pretreatment on skin didn't affect on the steady state flux, however, the lag time was shortened. The permeation rate of EE through the stripped skin was much larger than that through the whole skin. It showed that the stratum corneum acts as a barrier of skin permeation. The fact that there is little difference in EE permeation between the intact skin and the stripped skin with EVA membrane shows the permeation of EE through the mouse skin is mainly controlled by the membrane.

• 폴리머
• /
• 제38권3호
• /
• pp.307-313
• /
• 2014

Poly(ethylene-co-vinyl acetate) (EVA) 중에 포함된 비닐아세테이트의 함량을 0~40 wt% 범위에서 변화시키면서, 관능화 그래핀 쉬트(functionalized graphene sheet, FGS)/EVA 복합재료의 물성 변화를 조사하였다. EVA 중 극성을 가진 비닐아세테이트의 함량이 증가할수록 FGS와의 혼화성이 증가하여, FGS의 분산이 좋아지면서 EVA의 표면 저항 감소, 모듈러스 증가가 효과적으로 발현되었다. EVA 중 비닐아세테이트의 함량이 적어 FGS와의 상호작용이 작은 경우는 계면에서의 접착력이 낮아 인장력을 부가한 경우 파괴가 급격히 진행되어 파괴점에서의 신도가 크게 감소하였다. 복합재료에서 EVA의 결정화는 FGS와의 상호작용으로 대체적으로 감소하였다. 하지만, 비닐아세테이트 함량이 작은 EVA에 소량의 FGS를 첨가한 경우는 기핵효과에 의한 결정화 촉진이 관찰되었다.

• 한국염색가공학회지
• /
• 제10권5호
• /
• pp.13-18
• /
• 1998

Polypropylene-ethylene/vinyl acetate copolymer (PP-EVA) blends were prepared by mechanical blending using relatively semi-crystaline ethylene-vinyl acetate copolymer and polypropylene. In order to obtain dyeable PP fiber, PP-EVA blends were prepared using below 10wt.％ of EVA and formed a filament by the melt spinning method. The resultant fibers had tensile strengh of 2∼3g/d, elongation of 330∼600%, initial modulus of 22∼46g/d, and exhibited markedly improved dyeing property.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.230.1-230.1
• /
• 2003

In case of oral application of quinupramine, antidepressants, it may cause adverse effects such as diarrhea, nausea due to transient high blood concentration. Ethylene vinyl acetate (EVA) which is heat-processible, flexible, inexpensive material was used for transdermal drug delivery. The purpose of this study was to develop the new transdermal delivery system of quinupramine using EVA polymer matrix that can provide sustained release and avoid the side effects. The EVA matrix containing quinupramine was prepared by solvent-evaporation method. (omitted)

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.27-34
• /
• 2017

In this experiment, blends of ethylene vinyl acetate rubber (EVM) with a vinyl acetate (VA) content greater than 40 wt% and ethylene propylene rubber (EPM) were prepared by mechanical mixing; a number of parameters of the blends, including oil resistance, morphological and dynamic mechanical properties and flame retardancy, were subsequently measured. In the $100^{\circ}C$ oil resistance test, both the ammonium polyphosphate/dipentaerythritol/expandable graphite (APP/DPER/EG) and aluminum hydroxide (ATH) flame retardant systems showed an increase in volume change with increasing EPM content. For the ATH system, the dispersion shape was coarse and aggregation was observed. The results of a dynamic mechanical test showed slightly higher E' and E'' for the APP/DPER/EG flame retardant system when compared to the single ATH system. For both the APP/DPER/EG and ATH systems, the limited oxygen index (LOI) tests performed at increasing content of EPM showed a LOI value higher than 30, indicating excellent flame resistance.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.220-224
• /
• 2019

Herein, three polymer compounds were manufactured using three polymer combination methods, ethylene-vinyl acetate/ethylene-propylene-diene-copolymer (EPDM), ethylene-vinyl acetate (EVA)/polyethylene-A (PE-A; density: 0.870), and ethylene-vinyl acetate (EVA)/polyethylene-B (PE-B; density: 0.885), for making cable sheath for use in the shipping industry. In this study, EVA, EPDM, PE-A, and PE-B were used as matrix polymers, and EVA-grafted maleic anhydride was used as a coupling agent for compounding with various compounds such as a fire retardant, cross-linking agent, filler, and other additives, besides the plasticizer. ${\Delta}T$, Mooney viscosity, and tensile strength increased in order of EPDM < PE-A < PE-B, the probable reason is due to the different crosslinking effect. The three compounds showed similar results for fire resistance and aging resistance after compounding process, but they showed excellent cold resistance owing to the non-polarity of the polymers and sufficient plasticizer content.