• 한국의류학회지
• /
• 제5권1호
• /
• pp.15-21
• /
• 1981

The effect of fatty acid content in oily soil and conditions of washing on the removal of triglyceride have been studied. Cotton lawn was soiled with the four-component soil-tripalmitin, palmitic acid, dodecyl alcohol and dodecane-and washed in constant temperature waterbath shaker. The detergency was estimated by analysis of triglyceride labelled carbon-14 on fabrics before and after washing by means of liquid scintillation counting. It was shown that the detergency of triglyceride washed with the nonionic, nonylphenol poly (10)-ethylene oxide and soap was increased steadily with increasing temperature, whereas with the anionics Na-DBS and SLS, the detergency was rather decreased when the temperature was elevated above $40^{\circ}C$. To investigate the effects of free fatty acid content in soil on the removal of triglyceride, the fabrics were soiled altering palmitic acid content, and then washed. From the results, the detergency of triglyceride was developed with increasing free fatty acid content. With soils containing less than $30\%$ of free fatty acid, of the three detergents tested, the nonionic was by far the most effective soil removal. Soap was intermediate and the synthetic anionic was the poorest. With soil containing $45\%$ of free fatty acid, soap was the most effective soil removal. When NaOH was added to detergent solution. the detergency of triglyceride was improved without regard to detergents. The optimum alkalinity was obtained according to free fatty acid content. And the alkalinity changed to low NaOH concentration with increasing free fatty acid content. From the results mentioned above, it could be concluded that the major removal mechanisms of triglyceride containing oily soil were mesomorphic phase formation, solubilization and soap forma-tion when alkali was added in detergent solution.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2652-2659
• /
• 2020

The methyl iodide (CH₃I) removal performance of tri-ethylene-di-amine impregnated activated carbon (TEDA-AC) used in the air cleaning unit of nuclear power plants (NPPs) should be maintained at least 99% between 24 month-performance test period. In order for evaluating the effectiveness of TEDA-AC on the removal performance of CH₃I in nuclear power plant during the operation of NPPs, the long-term test for up to 15 months was carried out under the simulated operating conditions (e.g., 25 ℃, RH 50%, ppb level poisoning gases injection) at nuclear power plants (NPPs). The TEDA-AC samples were analyzed with the Brunauer-Emmett-Teller (BET) specific surface area and TEDA content as well as CH₃I penetration test. It is clearly evident that more than 99% of CH₃I removal performance of TEDA-AC was observed in the TEDA-AC samples during 15 months of long-term operation under the simulated NPP operating conditions including the ppb level of organic and oxide form of poisoning gases. BET specific surface area and TEDA content that can affect the CH₃I removal performance of TEDA-AC were also maintained as those in new TEDA-AC during 15 months of long-term operation.

• Advances in environmental research
• /
• 제3권2호
• /
• pp.151-162
• /
• 2014

Among the combination of 4 different second metals and 3 different noble metals, Ni 10%-Pd 1%/hematite (Ni(10)-Pd(1)/H) showed best tetrachloroethylene (PCE) removal (75.8%) and production of non-toxic products (39.8%) in closed batch reactors under an anaerobic condition. The effect of environmental factors (pH, contents of Ni and Pd in catalyst, and hydrogen gas concentration) on the reductive dechlorination of PCE by Pd-Ni/hematite catalysts was investigated. PCE was degraded less at the condition of Ni(5)/H (13.7%) than at the same condition with Ni(10)/H (20.6%). Removals of PCE were rarely influenced by the experimental condition of different Pd amounts (Pd(1)/H and Pd(3)/H). Acidic to neutral pH conditions were favorable to the degradation of PCE, compared to the alkaline condition (pH 10). Increasing Ni contents from 1 to 10% increased the PCE removal to 89.8% in 6 hr. However, the removal decreased to 74.2% at Ni content of 20%. Meanwhile, increasing Pd contents to 6% showed no difference in PCE removal at Pd content of more than 1%. Increasing H2 concentration increased the removal of PCE until 4% H2 which was maximumly applied in this study. Chlorinated products such as trichloroethylene, 1,1-dichloroethylene, cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, and vinyl chloride were not observed while PCE was transformed to acetylene (24%), ethylene (5%), and ethane (11%) by Ni(10)-Pd(1)/H catalyst in 6hr.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.134-140
• /
• 2004

Semi-crystalline poly(ethylene terephthalate) (PET) film surfaces were modified with argon and oxygen plasmas by radio-frequency (RF) glow discharge at 240 mTorr/40 W; the changes in topography and surface structure were investigated by atomic force microscopy (AFM) in conjunction with specular reflectance of infrared microspectroscopy (IMS). Under our operating conditions, analysis of the AFM images revealed that longer plasma treatment results in significant ablation on the film surface with increasing roughness, regardless of the kind of plasma used. The basic topographies, however, were different depending upon the kind of gas used. The specular reflectance analysis showed that the ablative mechanisms of the argon and oxygen plasma treatments are entirely different with one another. For the Ar-plasma-treated PET surface, no observable difference in the chemical structure was observed before and after plasma treatment. On the other hand, the oxygen-plasma-treated PET surface displays a significant decrease in the number of aliphatic C-H groups. We conclude that a constant removal of material from the PET surface occurs when using the Ar-plasma, whereas preferential etching of aliphatic C-H groups, with respect to, e.g. , carbonyl and ether groups, occurs upon oxygen plasma.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.361-369
• /
• 2018

A manufacturing method has been devised to prepare novel heterogeneous cation exchange membranes by mixing ethylene vinyl acetate (EVA) copolymers with a commercial cation exchange resin. Optimum material characteristics, mixture ratios and manufacturing conditions have been worked out for achieving favorable membrane performance. Ion exchange capacity, electrical resistance, water uptake, swelling ratio and tensile strength properties were measured. SEM analysis was used to monitor morphology. Effects of vinyl acetate (VA) content, melt index (MI) and ion exchange resin content on properties of heterogeneous cation exchange membranes have been discussed. An application test was carried out by mounting a selected membrane in a membrane capacitive deionization (MCDI) system to investigate its desalination capability. 0.92 meq/g of ion exchange capacity, $8.7{\Omega}.cm^2$ of electrical resistance, $40kgf/cm^2$ of tensile strength, 19% of swelling ratio, 42% of water uptake, and 56.4% salt removal rate were achieved at best. VA content plays a leading role on the extent of physical properties and performance; however, MI is important for having uniform distribution of resin grains and achieving better ionic conductivity. Overall, manufacturing cost has been suppressed to 5-10% of that of homogeneous ion exchange membranes.

• 폴리머
• /
• 제25권1호
• /
• pp.25-32
• /
• 2001

${\circ}C$ 범위에서 아연과 망간촉매를 사용하여 에스테르 교환반응시켜 반응속도를 살펴보았다. 반응은 반회분식 반응기에서 비등온 조건으로 진행되었고 반응온도와 메탄올 유출량으로 반응성을 평가하였다. 반응모델로서는 관능기 모델과 분자종 모델을 적용하여 상호 비교하였다. 아연촉매를 사용할 경우 DMN과 EG의 반응속도는 methyl hydroxyethyl naphthalate(MHEN)와 EG의 반응속도에 비해 1.4배정도 였으나 망간촉매를 사용할 경우 4.3배정도로 촉매 종류에 따라 반응성이 크게 차이가 있음을 알 수 있었다. 아연촉매의 경우 DMN 및 MHEN과 EG의 반응에 대한 촉매농도의 반응차수는 1보다 작았으나, 망간촉매의 경우 오히려 1보다 컸다. 활성화에너지는 DMN과 MHEN의 분자종 차이에 관계없이 아연과 망간촉매의 경우 각각 25000, 28750 cal/mol이었다. 두 가지 반응모델을 비교하여 본 결과 분자종 모델이 반응현상을 잘 표현함을 알 수 있었다.

• 청정기술
• /
• 제22권4호
• /
• pp.281-285
• /
• 2016

난분해성 1,4-다이옥산을 분해시키기 위하여 촉매습식과산화반응에 활성적인 Cu wire촉매를 사용하였다. Cu wire 촉매를 사용함으로써 1,4-다이옥산의 완전한 분해가 가능하였으나, 분해된 1,4-다이옥산은 완전 무기화($CO_2$와 $H_2O$로 전환)되지 못하고 중간생성물인 ethylene glycol diformate, oxalic acid, formic acid, formaldehyde, acetaldehyde 등으로 전환되었다. 1,4-다이옥산이 분해되어 없어짐에 따라 formaldehyde와 oxalic acid가 점진적으로 나타나기 시작하여 증가하다가 최고농도를 보인 후 다시 감소하였다. 이들 두 중간체의 최고농도 도달시점에 acetaldehyde의 농도가 급격히 증가하여 최고농도를 보인 후 다시 감소하였다. 이들 세가지 중간물질의 감소와 함께 ethylene glycol diformate, formic acid가 생성되기 시작하여 그 농도가 점진적으로 증가하였다. 이들은 연속적인 과정을 통해 생성되었다. Cu wire 촉매는 반응이 진행되는 동안 활성이 떨어지지 않고 매우 안정적이었다.

• 농업과학연구
• /
• 제29권1호
• /
• pp.15-23
• /
• 2002

관행적인 수확기인 11월 6일에 수확한 '후지' 사과는 80% 이상이 밀증상을 나타내었으나 에틸렌 발생량을 기준으로 볼 때 climacteric stage에 도달하지는 않았다. 모의 수출 전 2 개월 저장기간 중 밀증상은 점차 감소하였다. 저장기간 중 가용성 고형물 수준은 일정하지 않았으나 경도와 생체중 감소가 저장기간일 길수록 증가하였다. 저장기간에 따라 모의 수출과 소매과정을 경과시킨 과실의 품질은 전반적으로 낮아졌지만 무처리에 비하여 30 um 플라스틱 필름 포장, 에틸렌제거제 처리는 전반적으로 과실의 품질을 소매단계까지 우수하게 유지시키는 결과를 보였다. 반면에 왁스처리는 외관품질을 우수하게 유지시켰지만 갈변장해를 일으켜 바람직하지 않았다. 따라서 수출용 과실은 건조한 환경에서 장기간 수송되고 판매되므로 품질저하가 심하여 이를 방지하기 위해서는 플라스틱 필름과 같은 moisture barrier 및 에 틸렌 제거 환경으로 선적하는 것이 바람직할 것으로 판단된다.

• 공업화학
• /
• 제20권4호
• /
• pp.407-410
• /
• 2009

실리카-알루미나의 Si/Al 조성이 1:5, 1:10 및 0:1 (100% 알루미나)에 $KMnO_4$를 18~20중량% 담지시킨 $KMnO_4$/실리카-알루미나와 $KMnO_4$/알루미나를 용매증발법으로 제조하였다. 이 촉매를 사용하여 GHSV = $1125h^{-1}$, 에틸렌이 포함된 혼합가스(에틸렌 0.2%, 공기 99.8%, 상대습도 50%)를 $30^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, $150^{\circ}C$에서 고정층 반응기를 사용하여 각 촉매들에 대해 에틸렌 제거율을 비교하였다.그 결과 실리카-알루미나 담체를 사용한 촉매가 알루미나 담체를 사용한 촉매보다 $30{\sim}150^{\circ}C$ 온도 범위에서 우수한 성능을 보여주었는데, $30{\sim}40^{\circ}C$에서는 170~210%, $60^{\circ}C$ 및 $150^{\circ}C$에서는 약 60% 우수한 성능을 보여주었다.

• Membrane and Water Treatment
• /
• 제7권1호
• /
• pp.55-70
• /
• 2016

Microfiltration/ultrafiltration (MF/UF) Adsorptive polyamide-6 (PA-6) membranes were prepared using wet phase inversion process. The prepared PA-6 membranes are characterized by scanning electron microscopy (SEM), porosity and swelling degree. In this study, the membranes performance has examined by adsorptive removal of copper ions from aqueous solutions in a batch adsorption mode. The $PA-6/H_2O$ membranes display sponge like and highly porous structures, with porosities of 41-73%. Under the conditions examined, the adsorption experiments have showed that the $PA-6/H_2O$ membranes had a good adsorption capacity (up to 120-280 mg/g at the initial copper ion concentration ($C_0$) = 680 mg/L, pH7), fast adsorption rates and short adsorption equilibrium times (less than 1.5-2 hrs) for copper ions. The fast adsorption in this study may be attributed to the high porosities and large pore sizes of the $PA-6/H_2O$ membranes, which have facilitated the transport of copper ions to the adsorption. The results obtained from the study illustrated that the copper ions which have adsorbed on the polyamide membranes can be effectively desorbed in an Ethylene dinitrilotetra acetic acid Di sodium salt ($Na_2$ EDTA) solution from initial concentration (up to 92% desorption efficiency) and the PA-6 membranes can be reused almost without loss of the adsorption capacity for copper ions. The results obtained from the study suggested that the $PA-6/H_2O$ membranes can be effectively applied for the adsorptive removal of copper ions from aqueous solutions.