• Archives of Pharmacal Research
• /
• 제19권1호
• /
• pp.18-22
• /
• 1996

Acrylate-terminated poly (ethylene glycol) (PEG) macromer was prepared by the reaction of PEG with acryloyl chloride. Photopolymerization of PEG macromer resulted in the formation of cross-linked PEG network. Interpenetrating polymer networks (IPNs) based on PEG and poly(acrylic acid) (PAA) was obtained via template polymerization of AA to the PEG network by UV curing. The swelling degree of the IPNs hydrogel increased with an increase of pH value due to the association-dissociation between carboxylic acid of PAA and either of PEG through hydrogen bounding. The swelling-deswelling behavior proceeded reversibly for the IPNs upon changing pH. Release of indomethacin from the IPNs demonstrated "on-off" regulation with pH fluctuation.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.327-330
• /
• 1996

Poly(L-leucine)(PLL)/poly(ethylene oxide)(PEO)/poly (L-leucine)(PLL) block copolymers were synthsized by polymerization of L-leucine N-carboxyanhydride with diamine-terminated PEO for possibility of wound dressing which may have several advantages such as 1) increase of solubility, 2) control of biodegradation, 3) absorption of body fluid. 4) non-immunogenic effect than PLL homopolymer wound dressing aleady commercialized. Water content increased with an increase of PEO content in the block copolymer due to the hydrophilicity of PEO. Release of silver sulfadiazine(AgSD) from AgSD loaded wound dressing increased with an increase of PEO content in the block copolymer. It was found that the number of Pseudomonas aeruginosa decrease with an increase of PEO content due to the fast release of antibacterial agents with an increase of PEO content in the block copolymer.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권1호
• /
• pp.25-31
• /
• 2009

Supercooled type ice storage system with aqueous solution (or water) may have trouble with non-uniform release of supercooling even though it contributes to the simplicity of system and ecological improvement. The non-uniform release increases the instability of the system because it may cause an ice blockage in pipe or cooling part. In order to suppress the release of the supercooling, a cooling experiment was tried to an ethylene glycol(EG) 3 mass% solution corresponding with pressurization. Also, the frequency ratio of the release of the supercooling was measured to the pressurization from 101 to 505 kPa. At results, the frequency ratio of supercooling release tends to decrease as the pressure of the aqueous solution increased in each cooling rate. Moreover, it tends to decrease as the cooling rate of the solution decreased in each pressure.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.71-77
• /
• 2004

We have synthesized various types of poly(ethylene glycol) (PEG)-ibuprofen conjugates by nucleophilic substitution of bromo-terminated PEG with ibuprofen-Cs salt. The conversion of the terminal hydroxyl groups to bromo-termini was quantitative, as was the drug conjugation process, which suggests that the present synthetic method is very useful for the preparation of PEG-based prodrugs from pharmaceuticals having carboxyl functionalities. The drug-release behavior of the prodrugs was examined in both phosphate buffer (PBS, pH 7.4) and rat plasma. From the drug-release behavior in PBS, we determined that each prodrug has high storage stability. The drug-release rate was observed to be much faster in rat plasma than in buffer solution as a result of the acceleration effect provided by enzymes present in the plasma. The drug-release rate in rat plasma depends on the degree of molecular aggregation of the prodrugs, which can be changed effectively by the nature of their spacer groups or by the use of Pluronic as the polymer carrier.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.111-115
• /
• 2011

pH-sensitive cross-linked polymeric micelles were synthesized by using block ionomer complexes of poly(ethylene oxide)-b-poly(methacrylic acid) (PEO-b-PMA) with calcium ions as micellar templates. An anticancer drug, doxorubicin (DOX) was conjugated on the cross-linked ionic cores of micelles via acid-labile hydrozone bonds. The resulting DOX-conjugated, pH-sensitive micelles are stable at physiological conditions, whereas the release of DOX was significantly increased at the acidic pH. Such micelles were internalized to lysosomes, and acidic pH in lysosomes triggers the release of DOX upon internalization in MCF-7 breast cancer cells. The released DOX entered the cell nucleus and eventually killed cancer cells. Therefore, these data demonstrate that the pH-sensitive micelles could be a promising nanocarrier for delivery of anticancer drug, DOX.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.482-486
• /
• 2005

향오일이 흡착된 $Al_2O_3$를 심물질로 함유한 생분해성 poly(${\varepsilon}$-caprolactone) (PCL)/poly(ethylene imine) (PEI) 마이크로캡슐을 PEI의 함량에 따라 제조하였다. 교반속도 그리고 유화제의 농도에 따른 마이크로캡슐의 직경과 모폴로지는 주사전자현미경을 이용하여 관찰하였고, 열적 거동은 DSC를 통해 알아보았다. 또한, 향오일 방출거동을 알아보기 위해 UV.vis. 흡광광도법으로 흡광도를 측정하여 방출된 향오일의 양을 측정하였다. 실험 결과, PCL/PEI 마이크로캡슐의 입자크기는 교반속도와 유화제의 농도가 증가할수록 감소하였다. 그리고 표면 모폴로지는 PEI의 함량이 증가함에 따라 표면은 변했고, 마이크로캡슐의 용융 엔탈피(${\Delta}H_m$)은 증가하는 것을 확인할 수 있었다. 향오일의 방출속도는 PEI의 함량이 증가함에 따라 증가하는 경향을 나타냈다. 또한, 이는 친수성인 PEI의 함량비가 증가함에 따라 캡슐표면의 친수성 그룹이 증가하였기 때문에 향오일의 확산이 용이하게 되었기 때문인 것으로 판단된다.

• Journal of Pharmaceutical Investigation
• /
• 제21권3호
• /
• pp.149-153
• /
• 1991

Polyethylene oxide (PEO)-polymethacrylic acid (PMAA) interpenetrating polymer networks (IPN) were synthesized via radical polymerization of PMAA and simultaneous crosslinking of PEO using triisocyanate. The equilibrium swelling of PEO-PMAA IPN was determined at different pHs. The swelling of PEO-PMAA IPN, ranged from 20% to 90%, was more sensitive than that of homo polymer PMAA gel This is probably due to protonation and deprotonation of the PMAA network and interpolymer complex formation between PEO and PMAA. Several model drugs were loaded into the IPN matrices and the release mechanisms were investigated. The release of nonionizable drugs such as ftorafur and prednisolone was controlled by swelling of the matrices. However, he release of propranolol, positively charged drug, was more affected by the ionic interaction between the drug and PMAA newtork, and the interpolymer complexation.

• 한국염색가공학회지
• /
• 제19권5호
• /
• pp.30-36
• /
• 2007

Cypermethrin-containing polyurea microcapsules were prepared by interfacial polymerization using aromatic 2,4-toluene diisocyanate(TDI) and Ethylene diamine(EDA) as wall forming materials. The effects of the protective colloids of polyvinylalcohol(PVA) and gelatin were investigated through experimentation. The mean size of the polyurea microcapsules was smaller and the surface morphology of the PVA was much smoother than gelatin. In addition the release behavior was much more controlled and better sustained. As the concentration of protective colloid increased, the wall membrane of the polyurea microcapsules became more stable, the thermal stability of the wall membrane increased, the mean particle size became smaller, and the particle distribution was more uniform. The release behavior of the core material changed according to the concentration. As the gelatin concentration was increased, a more controlled and sustained release behavior was observed. However, in the case of PVA, the increase of PVA concentration lead to a more rapid release rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.686-690
• /
• 2017

본 연구에서는 two-phase model(이상 모델)을 활용하여, 고폭약(RDX) 입자가 고르게 분포되어 있는 에틸렌-공기 혼합물의 데토네이션 속도, 압력을 포함하는 데토네이션 특성을 확인하였다. 순수 가연성 기체 혼합물 내에 고폭약 입자를 분포시킬 경우, 고폭약의 화학 반응에 의한 열방출에 의해 순수 가연성 기체 혼합물의 데토네이션 보다 높은 압력 및 임펄스 증가를 발생시킬 수 있다. 본 연구에서 제안된 수치해석 접근법으로 계산한 결과를 검증하기 위하여, 이전에 수행된 실험 결과(RDX 입자의 함량에 따른 데토네이션 압력/속도)와 비교하였다.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.283-290
• /
• 2003

Organic drugs including aspirin, omeprazole, and naproxen with three different levels of octanol/water partition coefficient were examined for their release behavior from the amphiphilic PCL-b-PEO-b-PCL (PCEC) matrix. Scanning electron micrograph (SEM) of PCEC illustrated a well defined two-phase morphology consisted of dispersed poly(ethylene oxide) (PEO) domain and continuous polycaprolactone (PCL) phase. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) experiments veri tied that three model drugs are dissolved as a molecular dispersion in PCEC matrix. The release of hydrophilic aspirin closely followed the water absorption profile of the matrix indicating that its major fraction is present in PEO domain. However, substantial amount of aspirin present in less hydrophilic region displayed discontinuous biphasic release pattern. In the case of omeprazole with intermediate hydrophobicity consistent release behavior was observed for a period of 24 hrs after the rapid liberation of ca. 10% of the drug presumably partitioned in PEO phase. It was ascribed to the fact that the progressive hydration of PCEC matrix gradually increased the chance of drug/water exposure to compensate the exhaustion of device. Naproxen with the highest octanol/water distribution coefficient among three model drugs exhibited a limited release of 35% for 24 hrs. Finally, hydroxypropyl methylcellulose phthalate (HPMCP)/PCEC blend matrix demonstrated an accelerated and quantitative release of hydrophobic naproxen by generating high porosity and thereby expanding polymer/water interface.