• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.225-231
• /
• 2014

In this study, we used polypropylene grafted with itaconic acid (PP-g-IA) as a compatibilizer to prevent phase separation phenomenon which occurs upon blending polypropylene (PP) and ethylene-vinyl alcohol copolymer (EVOH). A compatibilizer was prepared using graft copolymerization of itaconic acid (IA) onto PP where input ratio of IA was 1, 2, 5, and 10 wt.%. To confirm the structure of PP-g-IA and the graft ratio of IA onto PP, we used $^1H$ NMR and FT-IR. We tested the compatibilizer which has highest graft ratio of 1% in immiscible PP/EVOH blends. The morphologies of PP/PP-g-IA/EVOH blends were analyzed by SEM. Thermal and mechanical properties of the blends were analyzed by DSC and UTM. PP-g-IA enhanced the interfacial adhesion of PP and EVOH copolymer.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.410-413
• /
• 2007

The effect of internal donor(ID) in the heterogeneous Ziegler-Natta catalyst on the ethylene-1-butene copolymerization and the molecular structure of the resulting copolymer was investigated. $SiO_2$-supported $TiCl_4$ catalysts having ID/Ti molar ratio of 0.5 were prepared with ethyaluminium dichloride, magnesium alkyl, 2-ethyl-1-hexanol and $TiCl_4$. Three different IDs were employed such as ethylbenzoate(EB), diisobuylphthalate(DIBP) and dioctylphthalate(DOP). ID-added catalyst showed a larger fraction of Ti(+3) compared to that of no ID-added catalyst. The EB-added catalyst showed the highest activity in copolymerization. Xylene soluble value decreased by more than 50 % with ID-added catalysts compared to that of no ID-added catalyst. Crystaf analysis showed the chemical compositional distribution of PE copolymer was improved in the case of DIBP-added catalyst significantly. It could be explained that the presence of ID could make more even active sites and block the non-stereospecific active sites.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.437-442
• /
• 2007

Poly(ethylene glycol) methyl ether (PEG)-poly(${\beta}$-amino ester) (PAE) block copolymers were synthesized using a Michael-type step polymerization, and the construction of pH-sensitive polymeric micelles (PM) investigated. The ${\beta}$-amino ester block of the block copolymers functioned as a pH-sensitive moiety as well as a hydrophobic block in relation to the ionization of PAE, while PEG acted as a hydrophilic block, regardless of ionization. The synthesized polymers were characterized using $^1H-NMR$, with their molecular weights measured using gel permeation chromatography. The $pK_b$ values of the pH-sensitive polymers were measured using a titration method. The pH-sensitivity and critical micelle concentration (CMC) of the block copolymers in PBS solution were estimated using fluorescence spectroscopy. The pH dependent micellization behaviors with various bisacrylate esters varied within a narrow pH range. The critical micelle concentration at pH 7.4 decreased from 0.032 to 0.004 mg/mL on increasing the number of methyl group in the bisacrylate from 4 to 10. Also, the particle size of the block copolymer micelles was determined using dynamic light scattering (DLS). The DLS results revealed the micelles had an average size below 100 nm. These pH-sensitive polymeric micelles may be good carriers for the delivery of an anticancer drug.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.135-139
• /
• 2005

In this study, poly(ethylene imine) (PEI) modified by methoxypoly(ethylene glycol) (mPEG) and folate as a gene carrier was synthesized to decrease cytotoxicity and to improve in vivo targeting. mPEG was modified by glutaric anhydride (GA) to endow carboxylic end group, followed by the activation reaction with EDC (N-ethyl-N'-(3-dimethyl-aminopropyl) carbodiimide) and NHS (N-hydroxysuccinimide). The activated carboxylic end group of mPEG was reacted with the amines of PEI to give mPEG graft PEI. The mPEG-folate-graft-PEI was synthesized by the reaction of mPEG-PEI with folate pre-activated by EDC/NHS. The obtained copolymers were characterized by $^1H-NMR$ and FT-IR. Gel retardation assay and fluorescence measurement indicated that DNA formed the complexes with the synthesized copolymers above N/P charge ratio 2. The size of complexes was ranging from 100 nm to 300 m. In conclusion, we confirmed that the synthesized copolymer have the possibility as a DNA carrier.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.889-898
• /
• 1994

Melt blends of copolyesterethylene(CPEE) and ethylene vinylacetate copolymer(EVA) with 15% vinylacetate content were prepared in the ratio of 0 to 100% CPEE with 10% interval for the purpose of obtaining useful biodegradable polymer system. Miscibility behavior of melt blend samples has been studied by observing the melting temperature change and cold crystallization temperature with differential scanning calorimetry. From the results of thermal analysis, it was shown that each 10% blend composition of CPEE and EVA had the partially miscibility. Useful compatibility has been observed in all blend composition except the samples of 50~80 % CPEE composition from the mechanical property study. Compatibility of these blend has been also observed with scanning electron microscopy. Biodegradability of CPEE/EVA blends has been evaluated by observing the change of specimen with Image analyzer before and after the inoculation with specific microorganism.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.417-421
• /
• 2005

Novel two synthetic technics using cationic ring-opening copolymerization of tetrahydrofuran (THF) and ethylene oxide (EO), or just polymerized EO on Poly-THF, could lead to random hydroxyl-terminated poly(EO-ran-THF) or tri-block PEG-PTHF-PEC, respectively. These reactions were carried out using $BF_3O(C_2H_5)_2$ as catalyst, 1,4-butanediol or PTHF as diol initiator. Copolymer structures were controlled by monomer feed ratio, or initial PTHF and EO monomer added amount. The molecular weight of polymer was merely dependant on the ratio of [monomer]/[diol], but not on catalyst. Well-defined random and block hydroxyl-terminated copolyether was found to be as the prepolymer for the propellant binder from the experiment to polyurethane with them.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.58-64
• /
• 2000

Poly(butylene terephthalate-co-oxybenzoate) (PBOT ) was synthesized by melt trans-esterification of poly(butylene terephthalate)(PBT) and p-acetoxybensoic acid (ABA) at 250, 260, and 27$0^{\circ}C$ with the compositions of PBT/ABA of 4/6, 5/5, 6/4. The sequence analysis of PBOT with a $^1$H FT-NMR indicated that the number of consecutive oxybenzoate units ranges from 1.2 to 1.5, which is larger than that of the corresponding poly(ethylene terephthalate)(PET)/ABA (PEOT) obtained at the same reaction conditions as the PBOT. The difference in the block length influenced the thermal degradation behavior: Polyoxybezoate (POB), PBT and PEOT showed one-step degradation whereas PBOT exhibited two-step degradation. The results suggested that PBOT consisted of three phases of PBT-rich phase, random phase of PBT and ABA, and ABA-rich phase.

• Korea-Australia Rheology Journal
• /
• v.13 no.4
• /
• pp.169-177
• /
• 2001

Morphological, thermal, rheological, and mechanical properties of reactive compatabilized blends of poly(butylene terephthalate) (PBT) and Polyamide-6 (PA) containing EGMA copolymer were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), advanced rheometric expansion system (ARES), and universal testing machine (UTM). From the results of thermal analysis by DSC, the melting point of the 30/70 PBT-PA blend was broadened after EGMA was added in the blends, since the enthalpy of melting of the PBT-PA somewhat decreased with the increase of EGMA content. From this result, it is suggested that the EGMA affected to the crystallization behavior and crystallinity of the PBT-PA blends. From SEM micrographs of the 70/30, 50/50, and 30/70 PBT-PA blends, the droplet size of the 30/70 PBT-PA blend was about 0.8 ${\mu}{\textrm}{m}$ which was smaller than that of the 50/50 and 70/30 PBT-PA blends. The complex viscosity of the 30/70 PBT-PA blend observed to be higher than that of the 50/50 and 70/30 PBT-PA blends. From the results of the morphology and rheological properties for the PBT-PA blends, it is suggested that the compatibility is increased in the 30/70 PBT-PA blend than the 50/50 and 70/30 PBT-PA blends. From the results of mechanical properties, it was found that the tensile strength of the 30/70 PBT-PA blend increased with the increase of EGMA up to 2 phr, while tensile strength of the blend in which EGMA content was higher than 2 phr decreased with the increase of EGMA content. From the results of morphological, thermal, rheological, and mechanical properties for the PBT-PA-EGMA blends, it is suggested that the EGMA could be used as a compatibilization role in the blends.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.199-199
• /
• 2011

The addition of a carbanion to ${\yen}{\acute{a}}{\yen}{\hat{a}}$-unsaturated carbonyl compounds is of importance in the C-C bond formation reactions for modern pharmaceuticals and organic synthesis. Recently, heterogeneous asymmetric catalysis became more attractive area of research because of the easy recovery and separation of the catalyst from the reaction system. Most of synthetic methods for heterogeneous catalysts were grafting or immobilization of homogeneous catalyst onto the solid supports. Trans-1,2-Diaminocyclohexane(DACH) and L-proline ligands have been enormously used as chiral ligands in several catalytic transformation under homogenous conditions. Our group prepared l-proline functionalized mesoporous silica was synthesized under acidic condition using a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer template (EO20PO70EO20, Pluronic P-123, BASF). Furthermore, we successfully directly synthesized trans-1,2 diaminocyclohexane functionalized mesoporous silica by using microwave method. The direct functionalization of chiral ligand into the framework of mesoporous materials is expected to be useful for the heterogeneous asymmetric catalysis. So, we adopt the direct synthesis of chiral ligand functionalized mesoporous silica by using thermal and microwave irradiation. Then, chiral ligand functionalized mesoporous silicas were applied to enantioselective asymmetric catalytic reactions.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.468-477
• /
• 2004

The polymer blends of waste poly(vinyl chloride) (RPVC) and waste polyethylene (RPE) were prepared by melt mixing. Various ethylene-vinyl acetate copolymers (EVA) and ethylene-methacrylic acid Na salt copolymer (ionomer) were used as compatibilizer. Their morphologies and mechanical properties were evaluated as a funtion of mixing sequence and time. EVA with high vinyl acetate contents showed a rapid increment of tensile properties when small amount was added. Tensile properties of the blends were gradually increased with the addition of ionomer. Morphologies of RPVC/RPE blends were analyzed by scanning electron microscopy. FT-IR data showed that EVA was a good compatibilizer in RPVC/RPE blend compared to ionomer. Mechanical properties of the blends were highly enhanced when RPVC and compatibilizer were mixed and first RPE was added later.